From: Greg KH <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, Jiri Slaby <jslaby@suse.cz>
Subject: Re: Linux 4.0.7
Date: Mon, 29 Jun 2015 13:46:29 -0700 [thread overview]
Message-ID: <20150629204629.GB19447@kroah.com> (raw)
In-Reply-To: <20150629204622.GA19447@kroah.com>
diff --git a/Makefile b/Makefile
index af6da040b952..bd76a8e94395 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
VERSION = 4
PATCHLEVEL = 0
-SUBLEVEL = 6
+SUBLEVEL = 7
EXTRAVERSION =
NAME = Hurr durr I'ma sheep
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index f70eca7ee705..0ef8d4b47102 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -153,6 +153,8 @@ extern void exynos_enter_aftr(void);
extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
+extern void exynos_set_delayed_reset_assertion(bool enable);
+
extern void s5p_init_cpu(void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
extern void __iomem *cpu_boot_reg_base(void);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 9e9dfdfad9d7..1081ff1f03c6 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -166,6 +166,33 @@ static void __init exynos_init_io(void)
exynos_map_io();
}
+/*
+ * Set or clear the USE_DELAYED_RESET_ASSERTION option. Used by smp code
+ * and suspend.
+ *
+ * This is necessary only on Exynos4 SoCs. When system is running
+ * USE_DELAYED_RESET_ASSERTION should be set so the ARM CLK clock down
+ * feature could properly detect global idle state when secondary CPU is
+ * powered down.
+ *
+ * However this should not be set when such system is going into suspend.
+ */
+void exynos_set_delayed_reset_assertion(bool enable)
+{
+ if (soc_is_exynos4()) {
+ unsigned int tmp, core_id;
+
+ for (core_id = 0; core_id < num_possible_cpus(); core_id++) {
+ tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
+ if (enable)
+ tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
+ else
+ tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
+ pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
+ }
+ }
+}
+
static const struct of_device_id exynos_dt_pmu_match[] = {
{ .compatible = "samsung,exynos3250-pmu" },
{ .compatible = "samsung,exynos4210-pmu" },
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index d2e9f12d12f1..d45e8cd23925 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -34,30 +34,6 @@
extern void exynos4_secondary_startup(void);
-/*
- * Set or clear the USE_DELAYED_RESET_ASSERTION option, set on Exynos4 SoCs
- * during hot-(un)plugging CPUx.
- *
- * The feature can be cleared safely during first boot of secondary CPU.
- *
- * Exynos4 SoCs require setting USE_DELAYED_RESET_ASSERTION during powering
- * down a CPU so the CPU idle clock down feature could properly detect global
- * idle state when CPUx is off.
- */
-static void exynos_set_delayed_reset_assertion(u32 core_id, bool enable)
-{
- if (soc_is_exynos4()) {
- unsigned int tmp;
-
- tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
- if (enable)
- tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
- else
- tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
- pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
- }
-}
-
#ifdef CONFIG_HOTPLUG_CPU
static inline void cpu_leave_lowpower(u32 core_id)
{
@@ -73,8 +49,6 @@ static inline void cpu_leave_lowpower(u32 core_id)
: "=&r" (v)
: "Ir" (CR_C), "Ir" (0x40)
: "cc");
-
- exynos_set_delayed_reset_assertion(core_id, false);
}
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
@@ -87,14 +61,6 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
/* Turn the CPU off on next WFI instruction. */
exynos_cpu_power_down(core_id);
- /*
- * Exynos4 SoCs require setting
- * USE_DELAYED_RESET_ASSERTION so the CPU idle
- * clock down feature could properly detect
- * global idle state when CPUx is off.
- */
- exynos_set_delayed_reset_assertion(core_id, true);
-
wfi();
if (pen_release == core_id) {
@@ -354,9 +320,6 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
udelay(10);
}
- /* No harm if this is called during first boot of secondary CPU */
- exynos_set_delayed_reset_assertion(core_id, false);
-
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
@@ -403,6 +366,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
exynos_sysram_init();
+ exynos_set_delayed_reset_assertion(true);
+
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
scu_enable(scu_base_addr());
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 318d127df147..582ef2df960d 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -235,6 +235,8 @@ static void exynos_pm_enter_sleep_mode(void)
static void exynos_pm_prepare(void)
{
+ exynos_set_delayed_reset_assertion(false);
+
/* Set wake-up mask registers */
exynos_pm_set_wakeup_mask();
@@ -383,6 +385,7 @@ early_wakeup:
/* Clear SLEEP mode set in INFORM1 */
pmu_raw_writel(0x0, S5P_INFORM1);
+ exynos_set_delayed_reset_assertion(true);
}
static void exynos3250_pm_resume(void)
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 05adc8bbdef8..401d8d0085aa 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -500,9 +500,11 @@ BEGIN_FTR_SECTION
CHECK_HMI_INTERRUPT
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
ld r1,PACAR1(r13)
+ ld r6,_CCR(r1)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
+ mtcr r6
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 4e3d5a9621fe..03189d86357d 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -354,6 +354,7 @@ int __copy_instruction(u8 *dest, u8 *src)
{
struct insn insn;
kprobe_opcode_t buf[MAX_INSN_SIZE];
+ int length;
unsigned long recovered_insn =
recover_probed_instruction(buf, (unsigned long)src);
@@ -361,16 +362,18 @@ int __copy_instruction(u8 *dest, u8 *src)
return 0;
kernel_insn_init(&insn, (void *)recovered_insn, MAX_INSN_SIZE);
insn_get_length(&insn);
+ length = insn.length;
+
/* Another subsystem puts a breakpoint, failed to recover */
if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
return 0;
- memcpy(dest, insn.kaddr, insn.length);
+ memcpy(dest, insn.kaddr, length);
#ifdef CONFIG_X86_64
if (insn_rip_relative(&insn)) {
s64 newdisp;
u8 *disp;
- kernel_insn_init(&insn, dest, insn.length);
+ kernel_insn_init(&insn, dest, length);
insn_get_displacement(&insn);
/*
* The copied instruction uses the %rip-relative addressing
@@ -394,7 +397,7 @@ int __copy_instruction(u8 *dest, u8 *src)
*(s32 *) disp = (s32) newdisp;
}
#endif
- return insn.length;
+ return length;
}
static int arch_copy_kprobe(struct kprobe *p)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 4ee827d7bf36..3cb2b58fa26b 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1064,6 +1064,17 @@ static void update_divide_count(struct kvm_lapic *apic)
apic->divide_count);
}
+static void apic_update_lvtt(struct kvm_lapic *apic)
+{
+ u32 timer_mode = kvm_apic_get_reg(apic, APIC_LVTT) &
+ apic->lapic_timer.timer_mode_mask;
+
+ if (apic->lapic_timer.timer_mode != timer_mode) {
+ apic->lapic_timer.timer_mode = timer_mode;
+ hrtimer_cancel(&apic->lapic_timer.timer);
+ }
+}
+
static void apic_timer_expired(struct kvm_lapic *apic)
{
struct kvm_vcpu *vcpu = apic->vcpu;
@@ -1272,6 +1283,7 @@ static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
apic_set_reg(apic, APIC_LVTT + 0x10 * i,
lvt_val | APIC_LVT_MASKED);
}
+ apic_update_lvtt(apic);
atomic_set(&apic->lapic_timer.pending, 0);
}
@@ -1304,20 +1316,13 @@ static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
break;
- case APIC_LVTT: {
- u32 timer_mode = val & apic->lapic_timer.timer_mode_mask;
-
- if (apic->lapic_timer.timer_mode != timer_mode) {
- apic->lapic_timer.timer_mode = timer_mode;
- hrtimer_cancel(&apic->lapic_timer.timer);
- }
-
+ case APIC_LVTT:
if (!kvm_apic_sw_enabled(apic))
val |= APIC_LVT_MASKED;
val &= (apic_lvt_mask[0] | apic->lapic_timer.timer_mode_mask);
apic_set_reg(apic, APIC_LVTT, val);
+ apic_update_lvtt(apic);
break;
- }
case APIC_TMICT:
if (apic_lvtt_tscdeadline(apic))
@@ -1552,7 +1557,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
for (i = 0; i < APIC_LVT_NUM; i++)
apic_set_reg(apic, APIC_LVTT + 0x10 * i, APIC_LVT_MASKED);
- apic->lapic_timer.timer_mode = 0;
+ apic_update_lvtt(apic);
apic_set_reg(apic, APIC_LVT0,
SET_APIC_DELIVERY_MODE(0, APIC_MODE_EXTINT));
@@ -1778,6 +1783,7 @@ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu,
apic_update_ppr(apic);
hrtimer_cancel(&apic->lapic_timer.timer);
+ apic_update_lvtt(apic);
update_divide_count(apic);
start_apic_timer(apic);
apic->irr_pending = true;
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 288547a3c566..f26ebc5e0be6 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -80,6 +80,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0489, 0xe057) },
{ USB_DEVICE(0x0489, 0xe056) },
{ USB_DEVICE(0x0489, 0xe05f) },
+ { USB_DEVICE(0x0489, 0xe076) },
{ USB_DEVICE(0x0489, 0xe078) },
{ USB_DEVICE(0x04c5, 0x1330) },
{ USB_DEVICE(0x04CA, 0x3004) },
@@ -111,6 +112,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3408) },
{ USB_DEVICE(0x13d3, 0x3423) },
{ USB_DEVICE(0x13d3, 0x3432) },
+ { USB_DEVICE(0x13d3, 0x3474) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -135,6 +137,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -166,6 +169,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 2c527da668ae..4fc415703ffc 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -174,6 +174,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -205,6 +206,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
index 6ec79dbc0840..cbbe40377ad6 100644
--- a/drivers/clk/at91/clk-pll.c
+++ b/drivers/clk/at91/clk-pll.c
@@ -173,8 +173,7 @@ static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
int i = 0;
/* Check if parent_rate is a valid input rate */
- if (parent_rate < characteristics->input.min ||
- parent_rate > characteristics->input.max)
+ if (parent_rate < characteristics->input.min)
return -ERANGE;
/*
@@ -187,6 +186,15 @@ static long clk_pll_get_best_div_mul(struct clk_pll *pll, unsigned long rate,
if (!mindiv)
mindiv = 1;
+ if (parent_rate > characteristics->input.max) {
+ tmpdiv = DIV_ROUND_UP(parent_rate, characteristics->input.max);
+ if (tmpdiv > PLL_DIV_MAX)
+ return -ERANGE;
+
+ if (tmpdiv > mindiv)
+ mindiv = tmpdiv;
+ }
+
/*
* Calculate the maximum divider which is limited by PLL register
* layout (limited by the MUL or DIV field size).
diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 69abb08cf146..eb8e5dc9076d 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -121,7 +121,7 @@ extern void __init of_at91sam9x5_clk_smd_setup(struct device_node *np,
struct at91_pmc *pmc);
#endif
-#if defined(CONFIG_HAVE_AT91_SMD)
+#if defined(CONFIG_HAVE_AT91_H32MX)
extern void __init of_sama5d4_clk_h32mx_setup(struct device_node *np,
struct at91_pmc *pmc);
#endif
diff --git a/drivers/crypto/caam/caamhash.c b/drivers/crypto/caam/caamhash.c
index f347ab7eea95..08b0da23c4ab 100644
--- a/drivers/crypto/caam/caamhash.c
+++ b/drivers/crypto/caam/caamhash.c
@@ -1543,6 +1543,8 @@ static int ahash_init(struct ahash_request *req)
state->current_buf = 0;
state->buf_dma = 0;
+ state->buflen_0 = 0;
+ state->buflen_1 = 0;
return 0;
}
diff --git a/drivers/crypto/caam/caamrng.c b/drivers/crypto/caam/caamrng.c
index ae31e555793c..a48dc251b14f 100644
--- a/drivers/crypto/caam/caamrng.c
+++ b/drivers/crypto/caam/caamrng.c
@@ -56,7 +56,7 @@
/* Buffer, its dma address and lock */
struct buf_data {
- u8 buf[RN_BUF_SIZE];
+ u8 buf[RN_BUF_SIZE] ____cacheline_aligned;
dma_addr_t addr;
struct completion filled;
u32 hw_desc[DESC_JOB_O_LEN];
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index ec4d932f8be4..169123a6ad0e 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -693,6 +693,16 @@ static int i915_drm_resume(struct drm_device *dev)
intel_init_pch_refclk(dev);
drm_mode_config_reset(dev);
+ /*
+ * Interrupts have to be enabled before any batches are run.
+ * If not the GPU will hang. i915_gem_init_hw() will initiate
+ * batches to update/restore the context.
+ *
+ * Modeset enabling in intel_modeset_init_hw() also needs
+ * working interrupts.
+ */
+ intel_runtime_pm_enable_interrupts(dev_priv);
+
mutex_lock(&dev->struct_mutex);
if (i915_gem_init_hw(dev)) {
DRM_ERROR("failed to re-initialize GPU, declaring wedged!\n");
@@ -700,9 +710,6 @@ static int i915_drm_resume(struct drm_device *dev)
}
mutex_unlock(&dev->struct_mutex);
- /* We need working interrupts for modeset enabling ... */
- intel_runtime_pm_enable_interrupts(dev_priv);
-
intel_modeset_init_hw(dev);
spin_lock_irq(&dev_priv->irq_lock);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 7a628e4cb27a..9536ec390614 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2732,6 +2732,9 @@ void i915_gem_reset(struct drm_device *dev)
void
i915_gem_retire_requests_ring(struct intel_engine_cs *ring)
{
+ if (list_empty(&ring->request_list))
+ return;
+
WARN_ON(i915_verify_lists(ring->dev));
/* Retire requests first as we use it above for the early return.
@@ -3088,8 +3091,8 @@ int i915_vma_unbind(struct i915_vma *vma)
} else if (vma->ggtt_view.pages) {
sg_free_table(vma->ggtt_view.pages);
kfree(vma->ggtt_view.pages);
- vma->ggtt_view.pages = NULL;
}
+ vma->ggtt_view.pages = NULL;
}
drm_mm_remove_node(&vma->node);
diff --git a/drivers/gpu/drm/mgag200/mgag200_mode.c b/drivers/gpu/drm/mgag200/mgag200_mode.c
index 9872ba9abf1a..2ffeda3589c2 100644
--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1526,6 +1526,11 @@ static int mga_vga_mode_valid(struct drm_connector *connector,
return MODE_BANDWIDTH;
}
+ if ((mode->hdisplay % 8) != 0 || (mode->hsync_start % 8) != 0 ||
+ (mode->hsync_end % 8) != 0 || (mode->htotal % 8) != 0) {
+ return MODE_H_ILLEGAL;
+ }
+
if (mode->crtc_hdisplay > 2048 || mode->crtc_hsync_start > 4096 ||
mode->crtc_hsync_end > 4096 || mode->crtc_htotal > 4096 ||
mode->crtc_vdisplay > 2048 || mode->crtc_vsync_start > 4096 ||
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 686411e4e4f6..b82f2dd1fc32 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -547,6 +547,9 @@ static int radeon_info_ioctl(struct drm_device *dev, void *data, struct drm_file
else
*value = 1;
break;
+ case RADEON_INFO_VA_UNMAP_WORKING:
+ *value = true;
+ break;
default:
DRM_DEBUG_KMS("Invalid request %d\n", info->request);
return -EINVAL;
diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index 147029adb885..ac72ece70160 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -2316,7 +2316,6 @@ isert_build_rdma_wr(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd,
page_off = offset % PAGE_SIZE;
send_wr->sg_list = ib_sge;
- send_wr->num_sge = sg_nents;
send_wr->wr_id = (uintptr_t)&isert_cmd->tx_desc;
/*
* Perform mapping of TCM scatterlist memory ib_sge dma_addr.
@@ -2336,14 +2335,17 @@ isert_build_rdma_wr(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd,
ib_sge->addr, ib_sge->length, ib_sge->lkey);
page_off = 0;
data_left -= ib_sge->length;
+ if (!data_left)
+ break;
ib_sge++;
isert_dbg("Incrementing ib_sge pointer to %p\n", ib_sge);
}
+ send_wr->num_sge = ++i;
isert_dbg("Set outgoing sg_list: %p num_sg: %u from TCM SGLs\n",
send_wr->sg_list, send_wr->num_sge);
- return sg_nents;
+ return send_wr->num_sge;
}
static int
@@ -3311,6 +3313,7 @@ static void isert_free_conn(struct iscsi_conn *conn)
{
struct isert_conn *isert_conn = conn->context;
+ isert_wait4flush(isert_conn);
isert_put_conn(isert_conn);
}
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 9b4e30a82e4a..beda011cb741 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1889,8 +1889,8 @@ static int map_request(struct dm_target *ti, struct request *rq,
dm_kill_unmapped_request(rq, r);
return r;
}
- if (IS_ERR(clone))
- return DM_MAPIO_REQUEUE;
+ if (r != DM_MAPIO_REMAPPED)
+ return r;
if (setup_clone(clone, rq, tio, GFP_KERNEL)) {
/* -ENOMEM */
ti->type->release_clone_rq(clone);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 75345c1e8c34..5c91df5c1f4f 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -5365,6 +5365,10 @@ static void b43_supported_bands(struct b43_wldev *dev, bool *have_2ghz_phy,
*have_5ghz_phy = true;
return;
case 0x4321: /* BCM4306 */
+ /* There are 14e4:4321 PCI devs with 2.4 GHz BCM4321 (N-PHY) */
+ if (dev->phy.type != B43_PHYTYPE_G)
+ break;
+ /* fall through */
case 0x4313: /* BCM4311 */
case 0x431a: /* BCM4318 */
case 0x432a: /* BCM4321 */
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 220c0fd059bb..50faef4f056f 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1468,6 +1468,11 @@ skip_countries:
goto alloc_fail8;
}
+ if (quirks & CLEAR_HALT_CONDITIONS) {
+ usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress));
+ usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress));
+ }
+
return 0;
alloc_fail8:
if (acm->country_codes) {
@@ -1747,6 +1752,10 @@ static const struct usb_device_id acm_ids[] = {
.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
},
+ { USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
+ .driver_info = CLEAR_HALT_CONDITIONS,
+ },
+
/* Nokia S60 phones expose two ACM channels. The first is
* a modem and is picked up by the standard AT-command
* information below. The second is 'vendor-specific' but
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index ffeb3c83941f..b3b6c9db6fe5 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -133,3 +133,4 @@ struct acm {
#define NO_DATA_INTERFACE BIT(4)
#define IGNORE_DEVICE BIT(5)
#define QUIRK_CONTROL_LINE_STATE BIT(6)
+#define CLEAR_HALT_CONDITIONS BIT(7)
diff --git a/include/uapi/drm/radeon_drm.h b/include/uapi/drm/radeon_drm.h
index 50d0fb41a3bf..76d2edea5bd1 100644
--- a/include/uapi/drm/radeon_drm.h
+++ b/include/uapi/drm/radeon_drm.h
@@ -1034,6 +1034,7 @@ struct drm_radeon_cs {
#define RADEON_INFO_VRAM_USAGE 0x1e
#define RADEON_INFO_GTT_USAGE 0x1f
#define RADEON_INFO_ACTIVE_CU_COUNT 0x20
+#define RADEON_INFO_VA_UNMAP_WORKING 0x25
struct drm_radeon_info {
uint32_t request;
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index ced69da0ff55..7f2e97ce71a7 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -1369,19 +1369,26 @@ static int check_preds(struct filter_parse_state *ps)
{
int n_normal_preds = 0, n_logical_preds = 0;
struct postfix_elt *elt;
+ int cnt = 0;
list_for_each_entry(elt, &ps->postfix, list) {
- if (elt->op == OP_NONE)
+ if (elt->op == OP_NONE) {
+ cnt++;
continue;
+ }
if (elt->op == OP_AND || elt->op == OP_OR) {
n_logical_preds++;
+ cnt--;
continue;
}
+ if (elt->op != OP_NOT)
+ cnt--;
n_normal_preds++;
+ WARN_ON_ONCE(cnt < 0);
}
- if (!n_normal_preds || n_logical_preds >= n_normal_preds) {
+ if (cnt != 1 || !n_normal_preds || n_logical_preds >= n_normal_preds) {
parse_error(ps, FILT_ERR_INVALID_FILTER, 0);
return -EINVAL;
}
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 87eff3173ce9..60b3100a2120 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -100,6 +100,7 @@ enum {
STAC_HP_ENVY_BASS,
STAC_HP_BNB13_EQ,
STAC_HP_ENVY_TS_BASS,
+ STAC_HP_ENVY_TS_DAC_BIND,
STAC_92HD83XXX_GPIO10_EAPD,
STAC_92HD83XXX_MODELS
};
@@ -2170,6 +2171,22 @@ static void stac92hd83xxx_fixup_gpio10_eapd(struct hda_codec *codec,
spec->eapd_switch = 0;
}
+static void hp_envy_ts_fixup_dac_bind(struct hda_codec *codec,
+ const struct hda_fixup *fix,
+ int action)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ static hda_nid_t preferred_pairs[] = {
+ 0xd, 0x13,
+ 0
+ };
+
+ if (action != HDA_FIXUP_ACT_PRE_PROBE)
+ return;
+
+ spec->gen.preferred_dacs = preferred_pairs;
+}
+
static const struct hda_verb hp_bnb13_eq_verbs[] = {
/* 44.1KHz base */
{ 0x22, 0x7A6, 0x3E },
@@ -2685,6 +2702,12 @@ static const struct hda_fixup stac92hd83xxx_fixups[] = {
{}
},
},
+ [STAC_HP_ENVY_TS_DAC_BIND] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = hp_envy_ts_fixup_dac_bind,
+ .chained = true,
+ .chain_id = STAC_HP_ENVY_TS_BASS,
+ },
[STAC_92HD83XXX_GPIO10_EAPD] = {
.type = HDA_FIXUP_FUNC,
.v.func = stac92hd83xxx_fixup_gpio10_eapd,
@@ -2763,6 +2786,8 @@ static const struct snd_pci_quirk stac92hd83xxx_fixup_tbl[] = {
"HP bNB13", STAC_HP_BNB13_EQ),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x190e,
"HP ENVY TS", STAC_HP_ENVY_TS_BASS),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1967,
+ "HP ENVY TS", STAC_HP_ENVY_TS_DAC_BIND),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1940,
"HP bNB13", STAC_HP_BNB13_EQ),
SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x1941,
prev parent reply other threads:[~2015-06-29 20:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-29 20:46 Linux 4.0.7 Greg KH
2015-06-29 20:46 ` Greg KH [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150629204629.GB19447@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.