Re: [PATCH v2 3/3] usb: dwc3: gadget: return error if command sent to DEPCMD register fails

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 1057 bytes --]

Hi,

On Thu, May 21, 2015 at 03:46:48PM +0530, Subbaraya Sundeep Bhatta wrote:
> We need to return error to caller if command is not sent to
> controller succesfully.
> 
> Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
> Fixes: 72246da40f37 (usb: Introduce DesignWare USB3 DRD Driver)
> Cc: <stable@vger.kernel.org>
> ---
> v2 changes:
> 	Added Fixes and Cc in commit message.

I noticed that this breaks at least my AM437x silicon with DWC3 2.40a
when used with g_zero and testusb. As of now, it could be that silicon
is mis-behaving because I got a Transfer Complete before the failing Set
Endpoint Transfer Resource command.

In any case, can you run on your setup with g_zero and test.sh/testusb
[1]/[2] just to verify that it really works for you ?

Meanwhile, I'll continue testing on my end.

cheers

[1] https://gitorious.org/usb/usb-tools/source/47ef073d9b6c0eae816204c81374aafb795c6e40:testusb.c
[2] https://gitorious.org/usb/usb-tools/source/47ef073d9b6c0eae816204c81374aafb795c6e40:test.sh

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]