From: "Nibble Max" <nibble.max@gmail.com>
To: "Dirk Nehring" <dnehring@gmx.net>
Cc: "linux-media" <linux-media@vger.kernel.org>
Subject: [PATCH 1/1] SMI PCIe IR driver for DVBSky cards
Date: Mon, 29 Jun 2015 22:09:42 +0800 [thread overview]
Message-ID: <201506292209394689855@gmail.com> (raw)
ported from the manufacturer's source tree, available from
http://dvbsky.net/download/linux/media_build-bst-150211.tar.gz
This is the second patch after a public review.
Acked-by: Nibble Max <nibble.max@gmail.com>
Reviewd-by: Nibble Max <nibble.max@gmail.com>
Signed-off-by: Dirk Nehring <dnehring@gmx.net>
---
drivers/media/pci/smipcie/Kconfig | 1 +
drivers/media/pci/smipcie/Makefile | 3 +
drivers/media/pci/smipcie/smipcie-ir.c | 232 +++++++++++++++++++++
.../pci/smipcie/{smipcie.c => smipcie-main.c} | 14 +-
drivers/media/pci/smipcie/smipcie.h | 19 ++
5 files changed, 268 insertions(+), 1 deletion(-)
create mode 100644 drivers/media/pci/smipcie/smipcie-ir.c
rename drivers/media/pci/smipcie/{smipcie.c => smipcie-main.c} (99%)
diff --git a/drivers/media/pci/smipcie/Kconfig b/drivers/media/pci/smipcie/Kconfig
index 21a1583..c11c772 100644
--- a/drivers/media/pci/smipcie/Kconfig
+++ b/drivers/media/pci/smipcie/Kconfig
@@ -7,6 +7,7 @@ config DVB_SMIPCIE
select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_M88RS6000T if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
+ depends on RC_CORE
help
Support for cards with SMI PCIe bridge:
- DVBSky S950 V3
diff --git a/drivers/media/pci/smipcie/Makefile b/drivers/media/pci/smipcie/Makefile
index be55481..013bc3f 100644
--- a/drivers/media/pci/smipcie/Makefile
+++ b/drivers/media/pci/smipcie/Makefile
@@ -1,3 +1,6 @@
+
+smipcie-objs := smipcie-main.o smipcie-ir.o
+
obj-$(CONFIG_DVB_SMIPCIE) += smipcie.o
ccflags-y += -Idrivers/media/tuners
diff --git a/drivers/media/pci/smipcie/smipcie-ir.c b/drivers/media/pci/smipcie/smipcie-ir.c
new file mode 100644
index 0000000..b8ea739
--- /dev/null
+++ b/drivers/media/pci/smipcie/smipcie-ir.c
@@ -0,0 +1,232 @@
+/*
+ * SMI PCIe driver for DVBSky cards.
+ *
+ * Copyright (C) 2014 Max nibble <nibble.max@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "smipcie.h"
+
+static void smi_ir_enableInterrupt(struct smi_rc *ir)
+{
+ struct smi_dev *dev = ir->dev;
+
+ smi_write(MSI_INT_ENA_SET, IR_X_INT);
+}
+
+static void smi_ir_disableInterrupt(struct smi_rc *ir)
+{
+ struct smi_dev *dev = ir->dev;
+
+ smi_write(MSI_INT_ENA_CLR, IR_X_INT);
+}
+
+static void smi_ir_clearInterrupt(struct smi_rc *ir)
+{
+ struct smi_dev *dev = ir->dev;
+
+ smi_write(MSI_INT_STATUS_CLR, IR_X_INT);
+}
+
+static void smi_ir_stop(struct smi_rc *ir)
+{
+ struct smi_dev *dev = ir->dev;
+
+ smi_ir_disableInterrupt(ir);
+ smi_clear(IR_Init_Reg, 0x80);
+}
+
+#define BITS_PER_COMMAND 14
+#define GROUPS_PER_BIT 2
+#define IR_RC5_MIN_BIT 36
+#define IR_RC5_MAX_BIT 52
+static u32 smi_decode_rc5(u8 *pData, u8 size)
+{
+ u8 index, current_bit, bit_count;
+ u8 group_array[BITS_PER_COMMAND * GROUPS_PER_BIT + 4];
+ u8 group_index = 0;
+ u32 command = 0xFFFFFFFF;
+
+ group_array[group_index++] = 1;
+
+ for (index = 0; index < size; index++) {
+
+ current_bit = (pData[index] & 0x80) ? 1 : 0;
+ bit_count = pData[index] & 0x7f;
+
+ if ((current_bit == 1) && (bit_count >= 2*IR_RC5_MAX_BIT + 1)) {
+ goto process_code;
+ } else if ((bit_count >= IR_RC5_MIN_BIT) &&
+ (bit_count <= IR_RC5_MAX_BIT)) {
+ group_array[group_index++] = current_bit;
+ } else if ((bit_count > IR_RC5_MAX_BIT) &&
+ (bit_count <= 2*IR_RC5_MAX_BIT)) {
+ group_array[group_index++] = current_bit;
+ group_array[group_index++] = current_bit;
+ } else {
+ goto invalid_timing;
+ }
+ if (group_index >= BITS_PER_COMMAND*GROUPS_PER_BIT)
+ goto process_code;
+
+ if ((group_index == BITS_PER_COMMAND*GROUPS_PER_BIT - 1)
+ && (group_array[group_index-1] == 0)) {
+ group_array[group_index++] = 1;
+ goto process_code;
+ }
+ }
+
+process_code:
+ if (group_index == (BITS_PER_COMMAND*GROUPS_PER_BIT-1))
+ group_array[group_index++] = 1;
+
+ if (group_index == BITS_PER_COMMAND*GROUPS_PER_BIT) {
+ command = 0;
+ for (index = 0; index < (BITS_PER_COMMAND*GROUPS_PER_BIT);
+ index = index + 2) {
+ if ((group_array[index] == 1) &&
+ (group_array[index+1] == 0)) {
+ command |= (1 << (BITS_PER_COMMAND -
+ (index/2) - 1));
+ } else if ((group_array[index] == 0) &&
+ (group_array[index+1] == 1)) {
+ /* */
+ } else {
+ command = 0xFFFFFFFF;
+ goto invalid_timing;
+ }
+ }
+ }
+
+invalid_timing:
+ return command;
+}
+
+static void smi_ir_decode(struct work_struct *work)
+{
+ struct smi_rc *ir = container_of(work, struct smi_rc, work);
+ struct smi_dev *dev = ir->dev;
+ struct rc_dev *rc_dev = ir->rc_dev;
+ u32 dwIRControl, dwIRData, dwIRCode, scancode;
+ u8 index, ucIRCount, readLoop, rc5_command, rc5_system, toggle;
+
+ dwIRControl = smi_read(IR_Init_Reg);
+ if (dwIRControl & rbIRVld) {
+ ucIRCount = (u8) smi_read(IR_Data_Cnt);
+
+ if (ucIRCount < 4)
+ goto end_ir_decode;
+
+ readLoop = ucIRCount/4;
+ if (ucIRCount % 4)
+ readLoop += 1;
+ for (index = 0; index < readLoop; index++) {
+ dwIRData = smi_read(IR_DATA_BUFFER_BASE + (index*4));
+
+ ir->irData[index*4 + 0] = (u8)(dwIRData);
+ ir->irData[index*4 + 1] = (u8)(dwIRData >> 8);
+ ir->irData[index*4 + 2] = (u8)(dwIRData >> 16);
+ ir->irData[index*4 + 3] = (u8)(dwIRData >> 24);
+ }
+ dwIRCode = smi_decode_rc5(ir->irData, ucIRCount);
+
+ if (dwIRCode != 0xFFFFFFFF) {
+ rc5_command = dwIRCode & 0x3F;
+ rc5_system = (dwIRCode & 0x7C0) >> 6;
+ toggle = (dwIRCode & 0x800) ? 1 : 0;
+ scancode = rc5_system << 8 | rc5_command;
+ rc_keydown(rc_dev, RC_TYPE_RC5, scancode, toggle);
+ }
+ }
+end_ir_decode:
+ smi_set(IR_Init_Reg, 0x04);
+ smi_ir_enableInterrupt(ir);
+}
+
+/* ir functions call by main driver.*/
+int smi_ir_irq(struct smi_rc *ir, u32 int_status)
+{
+ int handled = 0;
+
+ if (int_status & IR_X_INT) {
+ smi_ir_disableInterrupt(ir);
+ smi_ir_clearInterrupt(ir);
+ schedule_work(&ir->work);
+ handled = 1;
+ }
+ return handled;
+}
+
+void smi_ir_start(struct smi_rc *ir)
+{
+ struct smi_dev *dev = ir->dev;
+
+ smi_write(IR_Idle_Cnt_Low, 0x00140070);
+ msleep(20);
+ smi_set(IR_Init_Reg, 0x90);
+
+ smi_ir_enableInterrupt(ir);
+}
+
+int smi_ir_init(struct smi_dev *dev)
+{
+ int ret;
+ struct rc_dev *rc_dev;
+ struct smi_rc *ir = &dev->ir;
+
+ rc_dev = rc_allocate_device();
+ if (!rc_dev)
+ return -ENOMEM;
+
+ /* init input device */
+ snprintf(ir->input_name, sizeof(ir->input_name), "IR (%s)",
+ dev->info->name);
+ snprintf(ir->input_phys, sizeof(ir->input_phys), "pci-%s/ir0",
+ pci_name(dev->pci_dev));
+
+ rc_dev->driver_name = "SMI_PCIe";
+ rc_dev->input_phys = ir->input_phys;
+ rc_dev->input_name = ir->input_name;
+ rc_dev->input_id.bustype = BUS_PCI;
+ rc_dev->input_id.version = 1;
+ rc_dev->input_id.vendor = dev->pci_dev->subsystem_vendor;
+ rc_dev->input_id.product = dev->pci_dev->subsystem_device;
+ rc_dev->dev.parent = &dev->pci_dev->dev;
+
+ rc_dev->driver_type = RC_DRIVER_SCANCODE;
+ rc_dev->map_name = RC_MAP_DVBSKY;
+
+ ir->rc_dev = rc_dev;
+ ir->dev = dev;
+
+ INIT_WORK(&ir->work, smi_ir_decode);
+ smi_ir_disableInterrupt(ir);
+
+ ret = rc_register_device(rc_dev);
+ if (ret)
+ goto ir_err;
+
+ return 0;
+ir_err:
+ rc_free_device(rc_dev);
+ return ret;
+}
+
+void smi_ir_exit(struct smi_dev *dev)
+{
+ struct smi_rc *ir = &dev->ir;
+ struct rc_dev *rc_dev = ir->rc_dev;
+
+ smi_ir_stop(ir);
+ rc_unregister_device(rc_dev);
+ ir->rc_dev = NULL;
+}
diff --git a/drivers/media/pci/smipcie/smipcie.c b/drivers/media/pci/smipcie/smipcie-main.c
similarity index 99%
rename from drivers/media/pci/smipcie/smipcie.c
rename to drivers/media/pci/smipcie/smipcie-main.c
index 143fd78..b039a22 100644
--- a/drivers/media/pci/smipcie/smipcie.c
+++ b/drivers/media/pci/smipcie/smipcie-main.c
@@ -468,6 +468,7 @@ static irqreturn_t smi_irq_handler(int irq, void *dev_id)
struct smi_dev *dev = dev_id;
struct smi_port *port0 = &dev->ts_port[0];
struct smi_port *port1 = &dev->ts_port[1];
+ struct smi_rc *ir = &dev->ir;
int handled = 0;
u32 intr_status = smi_read(MSI_INT_STATUS);
@@ -480,6 +481,9 @@ static irqreturn_t smi_irq_handler(int irq, void *dev_id)
if (dev->info->ts_1)
handled += smi_port_irq(port1, intr_status);
+ /* ir interrupt.*/
+ handled += smi_ir_irq(ir, intr_status);
+
return IRQ_RETVAL(handled);
}
@@ -993,6 +997,10 @@ static int smi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto err_del_port0_attach;
}
+ ret = smi_ir_init(dev);
+ if (ret < 0)
+ goto err_del_port1_attach;
+
#ifdef CONFIG_PCI_MSI /* to do msi interrupt.???*/
if (pci_msi_enabled())
ret = pci_enable_msi(dev->pci_dev);
@@ -1003,10 +1011,13 @@ static int smi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
ret = request_irq(dev->pci_dev->irq, smi_irq_handler,
IRQF_SHARED, "SMI_PCIE", dev);
if (ret < 0)
- goto err_del_port1_attach;
+ goto err_del_ir;
+ smi_ir_start(&dev->ir);
return 0;
+err_del_ir:
+ smi_ir_exit(dev);
err_del_port1_attach:
if (dev->info->ts_1)
smi_port_detach(&dev->ts_port[1]);
@@ -1039,6 +1050,7 @@ static void smi_remove(struct pci_dev *pdev)
if (dev->info->ts_0)
smi_port_detach(&dev->ts_port[0]);
+ smi_ir_exit(dev);
smi_i2c_exit(dev);
iounmap(dev->lmmio);
pci_set_drvdata(pdev, NULL);
diff --git a/drivers/media/pci/smipcie/smipcie.h b/drivers/media/pci/smipcie/smipcie.h
index 10cdf20..68cdda2 100644
--- a/drivers/media/pci/smipcie/smipcie.h
+++ b/drivers/media/pci/smipcie/smipcie.h
@@ -234,6 +234,17 @@ struct smi_cfg_info {
int fe_1;
};
+struct smi_rc {
+ struct smi_dev *dev;
+ struct rc_dev *rc_dev;
+ char input_phys[64];
+ char input_name[64];
+ struct work_struct work;
+ u8 irData[256];
+
+ int users;
+};
+
struct smi_port {
struct smi_dev *dev;
int idx;
@@ -284,6 +295,9 @@ struct smi_dev {
/* i2c */
struct i2c_adapter i2c_bus[2];
struct i2c_algo_bit_data i2c_bit[2];
+
+ /* ir */
+ struct smi_rc ir;
};
#define smi_read(reg) readl(dev->lmmio + ((reg)>>2))
@@ -296,4 +310,9 @@ struct smi_dev {
#define smi_set(reg, bit) smi_andor((reg), (bit), (bit))
#define smi_clear(reg, bit) smi_andor((reg), (bit), 0)
+int smi_ir_irq(struct smi_rc *ir, u32 int_status);
+void smi_ir_start(struct smi_rc *ir);
+void smi_ir_exit(struct smi_dev *dev);
+int smi_ir_init(struct smi_dev *dev);
+
#endif /* #ifndef _SMI_PCIE_H_ */
--
1.8.3.1
next reply other threads:[~2015-06-29 14:09 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-29 14:09 Nibble Max [this message]
2015-06-29 14:40 ` [PATCH 1/1] SMI PCIe IR driver for DVBSky cards Ole Ernst
2015-06-30 1:20 ` Nibble Max
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201506292209394689855@gmail.com \
--to=nibble.max@gmail.com \
--cc=dnehring@gmx.net \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.