All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steve Wise <swise-7bPotxP6k4+P2YhJcF5u+vpXobYPEAuW@public.gmane.org>
To: dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org
Cc: roid-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org,
	linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	sagig-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org,
	infinipath-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
	target-devel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	eli-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org,
	ogerlitz-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org
Subject: [PATCH V4 5/5] RDMA/isert: Limit read depth based on the device max_sge_rd capability
Date: Thu, 02 Jul 2015 10:16:30 -0500	[thread overview]
Message-ID: <20150702151629.12946.7797.stgit@build.ogc.int> (raw)
In-Reply-To: <20150702151508.12946.29133.stgit-T4OLL4TyM9aNDNWfRnPdfg@public.gmane.org>

Use the device's max_sge_rd capability to compute the target's read sge
depth.  Save both the read and write max_sge values in the isert_conn
struct, and use these when creating RDMA_WRITE/READ work requests.

Signed-off-by: Steve Wise <swise-7bPotxP6k4+P2YhJcF5u+vpXobYPEAuW@public.gmane.org>
Reviewed-by: Sagi Grimberg <sagig-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org>
---
 drivers/infiniband/ulp/isert/ib_isert.c |   31 +++++++++++++++++++++++--------
 drivers/infiniband/ulp/isert/ib_isert.h |    3 ++-
 2 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/drivers/infiniband/ulp/isert/ib_isert.c b/drivers/infiniband/ulp/isert/ib_isert.c
index 2737ade..c2c7037 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.c
+++ b/drivers/infiniband/ulp/isert/ib_isert.c
@@ -163,7 +163,9 @@ isert_create_qp(struct isert_conn *isert_conn,
 	 * outgoing control PDU responses.
 	 */
 	attr.cap.max_send_sge = max(2, device->dev_attr.max_sge - 2);
-	isert_conn->max_sge = attr.cap.max_send_sge;
+	isert_conn->max_write_sge = attr.cap.max_send_sge;
+	isert_conn->max_read_sge = min_t(u32, device->dev_attr.max_sge_rd,
+					 attr.cap.max_send_sge);
 
 	attr.cap.max_recv_sge = 1;
 	attr.sq_sig_type = IB_SIGNAL_REQ_WR;
@@ -2376,7 +2378,7 @@ isert_put_text_rsp(struct iscsi_cmd *cmd, struct iscsi_conn *conn)
 static int
 isert_build_rdma_wr(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd,
 		    struct ib_sge *ib_sge, struct ib_send_wr *send_wr,
-		    u32 data_left, u32 offset)
+		    u32 data_left, u32 offset, u32 max_sge)
 {
 	struct iscsi_cmd *cmd = isert_cmd->iscsi_cmd;
 	struct scatterlist *sg_start, *tmp_sg;
@@ -2387,7 +2389,7 @@ isert_build_rdma_wr(struct isert_conn *isert_conn, struct isert_cmd *isert_cmd,
 
 	sg_off = offset / PAGE_SIZE;
 	sg_start = &cmd->se_cmd.t_data_sg[sg_off];
-	sg_nents = min(cmd->se_cmd.t_data_nents - sg_off, isert_conn->max_sge);
+	sg_nents = min(cmd->se_cmd.t_data_nents - sg_off, max_sge);
 	page_off = offset % PAGE_SIZE;
 
 	send_wr->sg_list = ib_sge;
@@ -2431,8 +2433,9 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 	struct isert_data_buf *data = &wr->data;
 	struct ib_send_wr *send_wr;
 	struct ib_sge *ib_sge;
-	u32 offset, data_len, data_left, rdma_write_max, va_offset = 0;
+	u32 offset, data_len, data_left, rdma_max_len, va_offset = 0;
 	int ret = 0, i, ib_sge_cnt;
+	u32 max_sge;
 
 	isert_cmd->tx_desc.isert_cmd = isert_cmd;
 
@@ -2454,7 +2457,12 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 	}
 	wr->ib_sge = ib_sge;
 
-	wr->send_wr_num = DIV_ROUND_UP(data->nents, isert_conn->max_sge);
+	if (wr->iser_ib_op == ISER_IB_RDMA_WRITE)
+		max_sge = isert_conn->max_write_sge;
+	else
+		max_sge =  isert_conn->max_read_sge;
+
+	wr->send_wr_num = DIV_ROUND_UP(data->nents, max_sge);
 	wr->send_wr = kzalloc(sizeof(struct ib_send_wr) * wr->send_wr_num,
 				GFP_KERNEL);
 	if (!wr->send_wr) {
@@ -2464,11 +2472,11 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 	}
 
 	wr->isert_cmd = isert_cmd;
-	rdma_write_max = isert_conn->max_sge * PAGE_SIZE;
+	rdma_max_len = max_sge * PAGE_SIZE;
 
 	for (i = 0; i < wr->send_wr_num; i++) {
 		send_wr = &isert_cmd->rdma_wr.send_wr[i];
-		data_len = min(data_left, rdma_write_max);
+		data_len = min(data_left, rdma_max_len);
 
 		send_wr->send_flags = 0;
 		if (wr->iser_ib_op == ISER_IB_RDMA_WRITE) {
@@ -2490,7 +2498,7 @@ isert_map_rdma(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
 		}
 
 		ib_sge_cnt = isert_build_rdma_wr(isert_conn, isert_cmd, ib_sge,
-					send_wr, data_len, offset);
+					send_wr, data_len, offset, max_sge);
 		ib_sge += ib_sge_cnt;
 
 		offset += data_len;
@@ -2619,6 +2627,13 @@ isert_fast_reg_mr(struct isert_conn *isert_conn,
 	fr_wr.wr.fast_reg.rkey = mr->rkey;
 	fr_wr.wr.fast_reg.access_flags = IB_ACCESS_LOCAL_WRITE;
 
+	/*
+	 * IWARP transports need REMOTE_WRITE for MRs used as the target of
+	 * an RDMA_READ.
+	 */
+	if (rdma_protocol_iwarp(ib_dev, isert_conn->cm_id->port_num))
+		fr_wr.wr.fast_reg.access_flags |= IB_ACCESS_REMOTE_WRITE;
+
 	if (!wr)
 		wr = &fr_wr;
 	else
diff --git a/drivers/infiniband/ulp/isert/ib_isert.h b/drivers/infiniband/ulp/isert/ib_isert.h
index 9ec23a7..29fde27 100644
--- a/drivers/infiniband/ulp/isert/ib_isert.h
+++ b/drivers/infiniband/ulp/isert/ib_isert.h
@@ -152,7 +152,8 @@ struct isert_conn {
 	u32			responder_resources;
 	u32			initiator_depth;
 	bool			pi_support;
-	u32			max_sge;
+	u32			max_write_sge;
+	u32			max_read_sge;
 	char			*login_buf;
 	char			*login_req_buf;
 	char			*login_rsp_buf;

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

      parent reply	other threads:[~2015-07-02 15:16 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-02 15:16 [PATCH V4 0/5] iSER support for iWARP Steve Wise
2015-07-02 15:16 ` [PATCH V4 1/5] mlx4, mlx5, mthca: Expose max_sge_rd correctly Steve Wise
2015-07-02 15:16 ` [PATCH V4 4/5] RDMA/isert: Set REMOTE_WRITE on DMA MRs to support iWARP devices Steve Wise
     [not found] ` <20150702151508.12946.29133.stgit-T4OLL4TyM9aNDNWfRnPdfg@public.gmane.org>
2015-07-02 15:16   ` [PATCH V4 2/5] ipath,qib: Expose max_sge_rd correctly Steve Wise
2015-07-02 15:16   ` [PATCH V4 3/5] RDMA/iser: Limit sg tablesize and max_sectors to device fastreg max depth Steve Wise
     [not found]     ` <20150702151619.12946.79500.stgit-T4OLL4TyM9aNDNWfRnPdfg@public.gmane.org>
2015-07-05  9:57       ` Sagi Grimberg
     [not found]         ` <5598FFA3.5020508-LDSdmyG8hGV8YrgS2mwiifqBs+8SCbDb@public.gmane.org>
2015-07-05 13:15           ` Steve Wise
2015-07-02 15:16   ` Steve Wise [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150702151629.12946.7797.stgit@build.ogc.int \
    --to=swise-7bpotxp6k4+p2yhjcf5u+vpxobypeauw@public.gmane.org \
    --cc=dledford-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
    --cc=eli-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
    --cc=infinipath-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    --cc=linux-rdma-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=ogerlitz-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
    --cc=roid-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
    --cc=sagig-VPRAkNaXOzVWk0Htik3J/w@public.gmane.org \
    --cc=target-devel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.