From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nishanth Menon <nm@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>,
linux-kernel@vger.kernel.org, rtc-linux@googlegroups.com,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
balbi@ti.com, grygorii.strashko@ti.com
Subject: Re: [PATCH V2 0/5] drivers/rtc/rtc-ds1307.c: Basic cleanups and support for wakeupirq
Date: Fri, 3 Jul 2015 00:47:28 +0200 [thread overview]
Message-ID: <20150702224728.GF3467@piout.net> (raw)
In-Reply-To: <1435076114-12416-1-git-send-email-nm@ti.com>
Hi,
On 23/06/2015 at 11:15:09 -0500, Nishanth Menon wrote :
> NOTE1: I have only tested in mcp79410 device, and not on other
> ds1307-rtc driver compatbile devices as I dont have any other.
> additional testing might be nice to have.
Patchwork picked up V3 of 4/5 correctly so I have applied the series and
pushed it in rtc-next. It will land in linux-next tomorrow so hopefully,
this will see more testing.
> NOTE2: there are additional fixes that linux-next seems to need but
> those are in omap-rtc, cpufreq etc, but those are not related by the
> ds-1307.
>
> V1: https://patchwork.kernel.org/patch/4759171/
>
> NOTE: Patch 5/5 of the series is meant to indicate the usage, and will
> be reposted along with other wakeup sources to be enabled once the
> driver changes are accepted.
>
I've left that one out so you can send it to the omap maintainers when
ready.
Thanks!
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nishanth Menon <nm@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>,
linux-kernel@vger.kernel.org, rtc-linux@googlegroups.com,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
balbi@ti.com, grygorii.strashko@ti.com
Subject: [rtc-linux] Re: [PATCH V2 0/5] drivers/rtc/rtc-ds1307.c: Basic cleanups and support for wakeupirq
Date: Fri, 3 Jul 2015 00:47:28 +0200 [thread overview]
Message-ID: <20150702224728.GF3467@piout.net> (raw)
In-Reply-To: <1435076114-12416-1-git-send-email-nm@ti.com>
Hi,
On 23/06/2015 at 11:15:09 -0500, Nishanth Menon wrote :
> NOTE1: I have only tested in mcp79410 device, and not on other
> ds1307-rtc driver compatbile devices as I dont have any other.
> additional testing might be nice to have.
Patchwork picked up V3 of 4/5 correctly so I have applied the series and
pushed it in rtc-next. It will land in linux-next tomorrow so hopefully,
this will see more testing.
> NOTE2: there are additional fixes that linux-next seems to need but
> those are in omap-rtc, cpufreq etc, but those are not related by the
> ds-1307.
>
> V1: https://patchwork.kernel.org/patch/4759171/
>
> NOTE: Patch 5/5 of the series is meant to indicate the usage, and will
> be reposted along with other wakeup sources to be enabled once the
> driver changes are accepted.
>
I've left that one out so you can send it to the omap maintainers when
ready.
Thanks!
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
--
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
---
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
WARNING: multiple messages have this Message-ID (diff)
From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 0/5] drivers/rtc/rtc-ds1307.c: Basic cleanups and support for wakeupirq
Date: Fri, 3 Jul 2015 00:47:28 +0200 [thread overview]
Message-ID: <20150702224728.GF3467@piout.net> (raw)
In-Reply-To: <1435076114-12416-1-git-send-email-nm@ti.com>
Hi,
On 23/06/2015 at 11:15:09 -0500, Nishanth Menon wrote :
> NOTE1: I have only tested in mcp79410 device, and not on other
> ds1307-rtc driver compatbile devices as I dont have any other.
> additional testing might be nice to have.
Patchwork picked up V3 of 4/5 correctly so I have applied the series and
pushed it in rtc-next. It will land in linux-next tomorrow so hopefully,
this will see more testing.
> NOTE2: there are additional fixes that linux-next seems to need but
> those are in omap-rtc, cpufreq etc, but those are not related by the
> ds-1307.
>
> V1: https://patchwork.kernel.org/patch/4759171/
>
> NOTE: Patch 5/5 of the series is meant to indicate the usage, and will
> be reposted along with other wakeup sources to be enabled once the
> driver changes are accepted.
>
I've left that one out so you can send it to the omap maintainers when
ready.
Thanks!
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2015-07-02 22:47 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-23 16:15 [PATCH V2 0/5] drivers/rtc/rtc-ds1307.c: Basic cleanups and support for wakeupirq Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` [rtc-linux] " Nishanth Menon
2015-06-23 16:15 ` [PATCH V2 1/5] drivers/rtc/rtc-ds1307.c: Convert to threaded IRQ Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` [rtc-linux] " Nishanth Menon
2015-06-23 16:15 ` [PATCH V2 2/5] drivers/rtc/rtc-ds1307.c: Switch to managed irq allocation Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` [rtc-linux] " Nishanth Menon
2015-06-23 16:15 ` [PATCH V2 3/5] drivers/rtc/rtc-ds1307.c: Sort the headers Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` [rtc-linux] " Nishanth Menon
2015-06-23 16:15 ` [PATCH V2 4/5] drivers/rtc/rtc-ds1307.c: Support optional wakeup interrupt source Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` [rtc-linux] " Nishanth Menon
2015-06-24 10:54 ` Tony Lindgren
2015-06-24 10:54 ` Tony Lindgren
2015-06-24 10:54 ` [rtc-linux] " Tony Lindgren
2015-06-24 15:36 ` Grygorii Strashko
2015-06-24 15:36 ` Grygorii Strashko
2015-06-24 15:36 ` Grygorii Strashko
2015-06-24 15:36 ` [rtc-linux] " Grygorii Strashko
2015-06-24 16:07 ` Nishanth Menon
2015-06-24 16:07 ` Nishanth Menon
2015-06-24 16:07 ` Nishanth Menon
2015-06-24 16:07 ` [rtc-linux] " Nishanth Menon
2015-06-24 16:25 ` Grygorii Strashko
2015-06-24 16:25 ` Grygorii Strashko
2015-06-24 16:25 ` Grygorii Strashko
2015-06-24 16:25 ` [rtc-linux] " Grygorii Strashko
2015-06-24 16:26 ` Nishanth Menon
2015-06-24 16:26 ` Nishanth Menon
2015-06-24 16:26 ` Nishanth Menon
2015-06-24 16:26 ` [rtc-linux] " Nishanth Menon
2015-06-25 17:23 ` Grygorii Strashko
2015-06-25 17:23 ` Grygorii Strashko
2015-06-25 17:23 ` Grygorii Strashko
2015-06-25 17:23 ` [rtc-linux] " Grygorii Strashko
2015-07-01 12:54 ` Alexandre Belloni
2015-07-01 12:54 ` Alexandre Belloni
2015-07-01 12:54 ` [rtc-linux] " Alexandre Belloni
2015-06-23 16:15 ` [TMP PATCH V2 5/5] ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410 Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` Nishanth Menon
2015-06-23 16:15 ` [rtc-linux] " Nishanth Menon
2015-06-24 14:34 ` [PATCH V2 0/5] drivers/rtc/rtc-ds1307.c: Basic cleanups and support for wakeupirq Felipe Balbi
2015-06-24 14:34 ` Felipe Balbi
2015-06-24 14:34 ` Felipe Balbi
2015-06-24 14:34 ` [rtc-linux] " Felipe Balbi
2015-06-24 15:37 ` Grygorii Strashko
2015-06-24 15:37 ` Grygorii Strashko
2015-06-24 15:37 ` Grygorii Strashko
2015-06-24 15:37 ` [rtc-linux] " Grygorii Strashko
2015-07-02 22:47 ` Alexandre Belloni [this message]
2015-07-02 22:47 ` Alexandre Belloni
2015-07-02 22:47 ` [rtc-linux] " Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150702224728.GF3467@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=a.zummo@towertech.it \
--cc=balbi@ti.com \
--cc=grygorii.strashko@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=rtc-linux@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.