From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Mon, 06 Jul 2015 07:41:32 +0000 Subject: Re: [PATCH] ARM: shmobile: r8a7779 Marzen legacy fix Message-Id: <20150706074131.GA26540@verge.net.au> List-Id: References: <20150706070216.25453.35953.sendpatchset@little-apple> In-Reply-To: <20150706070216.25453.35953.sendpatchset@little-apple> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-sh@vger.kernel.org On Mon, Jul 06, 2015 at 04:02:16PM +0900, Magnus Damm wrote: > From: Magnus Damm > > Unbreak the r8a7779 Marzen legacy code provided by marzen_defconfig. > > As it is today Marzen multiplatform is working, but the legacy code > is broken. This patch intends to leave multiplatform as-is but do > a simple one-shot fix to unbreak the legacy code base. > > Without this patch there is no preset delay and the TWD is defined > both in C code and in DT. Solve the delay by invoking shmobile_init_delay() > and simply exclude the TWD DT instance in case of building for legacy. > > Marzen legacy code will be removed in the near future, but until then > we may as well avoid breaking it. Thanks, that does seem to improve things a lot. Tested-by: Simon Horman I wonder if we should also add the following? Fixes: f2a5473861cf ("clocksource: sh_tmu: Set cpu_possible_mask to fix SMP broadcast") For the record, I found that after I enabled CONFIG_SMSC_PHY the boot now gets as far as initialising SDHI. ... i2c-rcar i2c-rcar.0: probed i2c-rcar i2c-rcar.1: probed i2c-rcar i2c-rcar.2: probed i2c-rcar i2c-rcar.3: probed initcall rcar_i2c_driver_init+0x0/0x10 returned 0 after 10428 usecs calling soc_camera_pdrv_init+0x0/0x10 @ 1 initcall soc_camera_pdrv_init+0x0/0x10 returned 0 after 74 usecs calling soc_mbus_init+0x0/0x8 @ 1 initcall soc_mbus_init+0x0/0x8 returned 0 after 0 usecs calling rcar_vin_driver_init+0x0/0x10 @ 1 soc-camera-pdrv soc-camera-pdrv.0: Probing soc-camera-pdrv.0 soc-camera-pdrv soc-camera-pdrv.1: Probing soc-camera-pdrv.1 initcall rcar_vin_driver_init+0x0/0x10 returned 0 after 11502 usecs calling rcar_thermal_driver_init+0x0/0x10 @ 1 rcar_thermal rcar_thermal.0: 1 sensor probed initcall rcar_thermal_driver_init+0x0/0x10 returned 0 after 4596 usecs calling mmc_blk_init+0x0/0x88 @ 1 initcall mmc_blk_init+0x0/0x88 returned 0 after 31 usecs calling sh_mobile_sdhi_driver_init+0x0/0x10 @ 1 > Signed-off-by: Magnus Damm > --- > > Built on top of renesas-devel-20150629-v4.1 > > arch/arm/boot/dts/r8a7779.dtsi | 4 ++-- > arch/arm/mach-shmobile/setup-r8a7779.c | 2 ++ > 2 files changed, 4 insertions(+), 2 deletions(-) > > --- 0001/arch/arm/boot/dts/r8a7779.dtsi > +++ work/arch/arm/boot/dts/r8a7779.dtsi 2015-07-06 15:42:28.182366518 +0900 > @@ -62,7 +62,7 @@ > reg = <0xf0001000 0x1000>, > <0xf0000100 0x100>; > }; > - > +#ifndef CONFIG_ARCH_SHMOBILE_LEGACY /* TWD defined in C code for legacy case */ > timer@f0000600 { > compatible = "arm,cortex-a9-twd-timer"; > reg = <0xf0000600 0x20>; > @@ -70,7 +70,7 @@ > (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; > clocks = <&cpg_clocks R8A7779_CLK_ZS>; > }; > - > +#endif > gpio0: gpio@ffc40000 { > compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; > reg = <0xffc40000 0x2c>; > --- 0001/arch/arm/mach-shmobile/setup-r8a7779.c > +++ work/arch/arm/mach-shmobile/setup-r8a7779.c 2015-07-06 15:43:58.472366518 +0900 > @@ -677,6 +677,8 @@ void __init r8a7779_add_standard_devices > > void __init r8a7779_add_early_devices(void) > { > + shmobile_init_delay(); > + > early_platform_add_devices(r8a7779_early_devices, > ARRAY_SIZE(r8a7779_early_devices)); > >