From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 02/15] imx: mx6ul: Add pins IOMUX head file
Date: Sun, 12 Jul 2015 16:16:07 +0200 [thread overview]
Message-ID: <201507121616.07413.marex@denx.de> (raw)
In-Reply-To: <20150712115302.GA17161@shlinux2>
On Sunday, July 12, 2015 at 01:53:05 PM, Peng Fan wrote:
> Hi Marek,
Hi!
> On Sun, Jul 12, 2015 at 01:39:58PM +0200, Marek Vasut wrote:
> >On Sunday, July 12, 2015 at 12:27:42 PM, Peng Fan wrote:
> >> Hi Marek,
> >>
> >> On Sun, Jul 12, 2015 at 12:10:29AM +0200, Marek Vasut wrote:
> >> >On Saturday, July 11, 2015 at 10:07:10 AM, Peng Fan wrote:
> >> >> Add i.MX6UL pins IOMUX file which defines the IOMUX settings for
> >> >> choose.
> >> >>
> >> >> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
> >> >> Signed-off-by: Ye.Li <B37916@freescale.com>
> >> >> ---
> >> >>
> >> >> Changes v2:
> >> >> none
> >> >>
> >> >> arch/arm/include/asm/arch-mx6/mx6-pins.h | 2 +
> >> >> arch/arm/include/asm/arch-mx6/mx6ul_pins.h | 1065
> >> >>
> >> >> ++++++++++++++++++++++++++++ 2 files changed, 1067 insertions(+)
> >> >>
> >> >> create mode 100644 arch/arm/include/asm/arch-mx6/mx6ul_pins.h
> >> >>
> >> >> diff --git a/arch/arm/include/asm/arch-mx6/mx6-pins.h
> >> >> b/arch/arm/include/asm/arch-mx6/mx6-pins.h index 534f780..4b6bb18
> >> >> 100644 --- a/arch/arm/include/asm/arch-mx6/mx6-pins.h
> >> >> +++ b/arch/arm/include/asm/arch-mx6/mx6-pins.h
> >> >> @@ -37,6 +37,8 @@ enum {
> >> >>
> >> >> #include "mx6sl_pins.h"
> >> >> #elif defined(CONFIG_MX6SX)
> >> >> #include "mx6sx_pins.h"
> >> >>
> >> >> +#elif defined(CONFIG_MX6UL)
> >> >> +#include "mx6ul_pins.h"
> >> >>
> >> >> #else
> >> >> #error "Please select cpu"
> >> >> #endif /* CONFIG_MX6Q */
> >> >>
> >> >> diff --git a/arch/arm/include/asm/arch-mx6/mx6ul_pins.h
> >> >> b/arch/arm/include/asm/arch-mx6/mx6ul_pins.h new file mode 100644
> >> >> index 0000000..c92b4f0
> >> >> --- /dev/null
> >> >> +++ b/arch/arm/include/asm/arch-mx6/mx6ul_pins.h
> >> >> @@ -0,0 +1,1065 @@
> >> >> +/*
> >> >> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> >> >> + *
> >> >> + * SPDX-License-Identifier: GPL-2.0+
> >> >> + */
> >> >> +
> >> >> +#ifndef __ASM_ARCH_IMX6UL_PINS_H__
> >> >> +#define __ASM_ARCH_IMX6UL_PINS_H__
> >> >> +
> >> >> +#include <asm/imx-common/iomux-v3.h>
> >> >> +
> >> >> +enum {
> >> >> +
> >> >> + MX6_PAD_BOOT_MODE0__GPIO5_IO10 =
> >> >> IOMUX_PAD(0x02A0, 0x0014, 5, 0x0000, 0, 0),
> >> >
> >> >Hi,
> >> >
> >> >why do you use enum here instead of just #defining those constants ?
> >>
> >> Just keep same with other mx6[x]_pins.h.
> >
> >arch/arm/include/asm/arch-mx6/mx6q_pins.h doesn't contain the enum to my
> >knowledge :)
>
> I am not sure whether it really make a difference or not if changed to
> define.
>
> In arch/arm/include/asm/arch-mx6/mx6-pins.h
> #ifdef CONFIG_MX6QDL
> enum {
> #define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \
> MX6_PAD_DECLARE(MX6Q_PAD_,name, pco, mc, mm, sio, si, pc),
> #include "mx6q_pins.h"
> #undef MX6_PAD_DECL
> #define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \
> MX6_PAD_DECLARE(MX6DL_PAD_,name, pco, mc, mm, sio, si, pc),
> #include "mx6dl_pins.h"
> };
> .....
> #elif defined(CONFIG_MX6SL)
> #include "mx6sl_pins.h"
> #elif defined(CONFIG_MX6SX)
> #include "mx6sx_pins.h"
> .....
>
> In mx6-pins.h, it is also enum. mx6ul-pins.h use same way with
> mx6sx/sl-pins.h.
It'd make sense if the enum was used to specify a type, which could
then be used in iomux functions to check the type OR to actually
enumerate the members of the enum. Neither is the case here, so I am
wondering why it's used :)
Maybe others can chime in.
next prev parent reply other threads:[~2015-07-12 14:16 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-11 8:07 [U-Boot] [PATCH V2 00/15] imx: Add i.MX6UL and basic board support Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 01/15] imx: mx6ul: Add i.MX6UL CPU type Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 02/15] imx: mx6ul: Add pins IOMUX head file Peng Fan
2015-07-11 22:10 ` Marek Vasut
2015-07-12 10:27 ` Peng Fan
2015-07-12 11:39 ` Marek Vasut
2015-07-12 11:53 ` Peng Fan
2015-07-12 14:16 ` Marek Vasut [this message]
2015-07-11 8:07 ` [U-Boot] [PATCH V2 03/15] imx: mx6ul: Update imx registers " Peng Fan
2015-07-11 22:11 ` Marek Vasut
2015-07-12 10:32 ` Peng Fan
2015-07-12 11:50 ` Marek Vasut
2015-07-12 11:55 ` Peng Fan
2015-07-12 14:14 ` Marek Vasut
2015-07-11 8:07 ` [U-Boot] [PATCH V2 04/15] imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 05/15] imx-common: timer: add i.MX6UL support Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 06/15] imx: mx6ul remove errata for i.MX6UL Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 07/15] imx:mx6ul add clock support Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 08/15] imx: mx6ul select SYS_L2CACHE_OFF Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 09/15] imx: mx6ul update soc related settings Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 10/15] imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 11/15] mxc: gpio add i.MX6UL support Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 12/15] mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 13/15] imx:mx6ul add dram spl configuration and header file Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 14/15] imx: imx6_spl add mx6ul support Peng Fan
2015-07-11 8:07 ` [U-Boot] [PATCH V2 15/15] imx: mx6ul_14x14_evk add basic board support Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201507121616.07413.marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.