[U-Boot] [PATCH RESEND] tools/imximage: set DCD pointer to NULL when its length is 0

[Baruch Siach <baruch@tkos.co.il>]

Hi Stefano,

On Thu, Jul 09, 2015 at 06:04:17PM +0200, Stefano Babic wrote:
> On 09/07/2015 17:19, Baruch Siach wrote:
> > When dcd_len is 0 the Write Data command that the set_dcd_rst_v2() routine
> > generates is empty. This causes HAB to complain that the command is invalid.
> > 
> > --------- HAB Event 1 -----------------
> > event data:
> > 	0xdb 0x00 0x0c 0x41 0x33 0x06 0xc0 0x00
> > 	0xcc 0x00 0x04 0x04
> > 
> > To fix this set the DCD pointer in the IVT to NULL in this case. The DCD header
> > itself is still needed for detect_imximage_version() to determine the image
> > version.
> > 
> > Signed-off-by: Baruch Siach <baruch@tkos.co.il>
> > ---
> > Resending with a proper To: header.
> > 
> >  tools/imximage.c | 6 +++++-
> >  1 file changed, 5 insertions(+), 1 deletion(-)
> > 
> > diff --git a/tools/imximage.c b/tools/imximage.c
> > index 6f469ae6336c..7b91d09699ad 100644
> > --- a/tools/imximage.c
> > +++ b/tools/imximage.c
> > @@ -250,7 +250,11 @@ static void set_imx_hdr_v2(struct imx_header *imxhdr, uint32_t dcd_len,
> >  	hdr_base = entry_point - imximage_init_loadsize +
> >  		flash_offset;
> >  	fhdr_v2->self = hdr_base;
> > -	fhdr_v2->dcd_ptr = hdr_base + offsetof(imx_header_v2_t, dcd_table);
> > +	if (dcd_len > 0)
> > +		fhdr_v2->dcd_ptr = hdr_base
> > +			+ offsetof(imx_header_v2_t, dcd_table);
> > +	else
> > +		fhdr_v2->dcd_ptr = 0;
> >  	fhdr_v2->boot_data_ptr = hdr_base
> >  			+ offsetof(imx_header_v2_t, boot_data);
> >  	hdr_v2->boot_data.start = entry_point - imximage_init_loadsize;
> > 
> 
> It looks ok for me.
> 
> Acked-by: Stefano Babic <sbabic@denx.de>

Thanks.

Which tree is this patch going through?

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -