All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Rutland <mark.rutland@arm.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] arm: ls1021a: Ensure LS1021 ARM Generic Timer CompareValue Set 64-bit
Date: Wed, 15 Jul 2015 10:14:26 +0100	[thread overview]
Message-ID: <20150715091426.GA9627@leverpostej> (raw)
In-Reply-To: <1436944385-28323-1-git-send-email-b18965@freescale.com>

Hi,

Isn't this the same patch as a couple of days ago [2], which I replied
to [3]?

On Wed, Jul 15, 2015 at 08:13:05AM +0100, Alison Wang wrote:
> This patch addresses a problem mentioned recently on this mailing list:
> [1].
> 
> In that posting a LS1021 based system was locking up at about 5 minutes
> after boot, but the problem was mysteriously related to the toolchain
> used for building u-boot.  Debugging the problem reveals a stuck
> interrupt 29 on the GIC.
> 
> It appears Freescale's LS1021 support in u-boot erroneously sets the
> 64-bit ARM generic PL1 physical time CompareValue register to all-ones
> with a 32-bit value.  This causes the timer compare to fire 344 seconds
> after u-boot configures it.  Depending on how fast u-boot gets the
> kernel booted, this amounts to about 5-minutes of Linux uptime before
> locking up.

If as in [2] this is an attempt to not generate interrupts that Linux
doesn't expect, it would be far better to simply disable the timer
interrupt before leaving U-Boot, ensuring that unexpected interrupts are
never generated regardless of the width or rate of the counter.

There are bits in CNTP_CTL to do this.

Thanks,
Mark.

[2] http://lists.denx.de/pipermail/u-boot/2015-July/218937.html
[3] http://lists.denx.de/pipermail/u-boot/2015-July/218979.html

> Apparently the bug is masked by some toolchains.  Perhaps this is
> explained by default compiler options, word sizes, or binutils versions.
> At any rate this patch makes the manipulation explicitly 64-bit which
> alleviates the issue.
> 
> [1]
> https://lists.yoctoproject.org/pipermail/meta-freescale/2015-June/014400.html
> Signed-off-by: Chris Kilgour <techie@whiterocker.com>
> Signed-off-by: Alison Wang <alison.wang@freescale.com>
> ---
>  arch/arm/cpu/armv7/ls102xa/timer.c                | 3 ++-
>  arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 2 +-
>  2 files changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/ls102xa/timer.c b/arch/arm/cpu/armv7/ls102xa/timer.c
> index 11b17b2..e6a32ca 100644
> --- a/arch/arm/cpu/armv7/ls102xa/timer.c
> +++ b/arch/arm/cpu/armv7/ls102xa/timer.c
> @@ -56,7 +56,8 @@ static inline unsigned long long us_to_tick(unsigned long long usec)
>  int timer_init(void)
>  {
>  	struct sctr_regs *sctr = (struct sctr_regs *)SCTR_BASE_ADDR;
> -	unsigned long ctrl, val, freq;
> +	unsigned long ctrl, freq;
> +	unsigned long long val;
>  
>  	/* Enable System Counter */
>  	writel(SYS_COUNTER_CTRL_ENABLE, &sctr->cntcr);
> diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
> index ee547fb..34854da 100644
> --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
> +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
> @@ -31,7 +31,7 @@
>  #define RCWSR4_SRDS1_PRTCL_SHIFT	24
>  #define RCWSR4_SRDS1_PRTCL_MASK		0xff000000
>  
> -#define TIMER_COMP_VAL			0xffffffff
> +#define TIMER_COMP_VAL			0xffffffffffffffffull
>  #define ARCH_TIMER_CTRL_ENABLE		(1 << 0)
>  #define SYS_COUNTER_CTRL_ENABLE		(1 << 24)
>  
> -- 
> 2.1.0.27.g96db324
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 

  reply	other threads:[~2015-07-15  9:14 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-15  7:13 [U-Boot] [PATCH] arm: ls1021a: Ensure LS1021 ARM Generic Timer CompareValue Set 64-bit Alison Wang
2015-07-15  9:14 ` Mark Rutland [this message]
2015-07-15  9:34   ` Huan Wang
2015-07-17 10:01   ` Huan Wang
2015-07-17 10:13     ` Marc Zyngier
2015-07-17 14:32       ` Huan Wang
2015-07-17 10:26     ` Mark Rutland
2015-07-17 14:35       ` Huan Wang
2015-08-17  6:55 ` [U-Boot] " Alexander Stein
2015-11-30 16:59 ` [U-Boot] [PATCH] " York Sun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150715091426.GA9627@leverpostej \
    --to=mark.rutland@arm.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.