All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] support for IT8586E
Date: Wed, 15 Jul 2015 17:44:53 +0000	[thread overview]
Message-ID: <20150715174453.GA30206@roeck-us.net> (raw)
In-Reply-To: <CANOLSHBWuQCpJTUT3aNi7_rqPwPT4QK7CkVxvhcuyfm4qqFw8g@mail.gmail.com>

On Wed, Jul 15, 2015 at 12:27:04PM -0400, Dev Anand wrote:
> Thanks Jean and Guenter,
> 
> There is no /proc/acpi/fan or /proc/acpi/thermal_zone folder but, I do see
> /proc/acpi/button and /proc/acpi/wakeup.
> Is there any guide on how to setup the ACPI fan control?
> 
Did you try to load the acpi modules Jean suggested ? 

Guenter

> Regards,
> Dev
> 
> $sensors
> k10temp-pci-00c3
> Adapter: PCI adapter
> temp1:        +37.8°C  (high = +70.0°C)
>                        (crit = +100.0°C, hyst = +99.0°C)
> 
> fam15h_power-pci-00c4
> Adapter: PCI adapter
> power1:           N/A  (crit =  18.96 W)
> 
> $sudo sensors-detect
> .....
> AMD Family 15h thermal sensors...                           Success!
>     (driver `k10temp')
> .....
> Some Super I/O chips contain embedded sensors. We have to write to
> standard I/O ports to probe them. This is usually safe.
> Do you want to scan for Super I/O sensors? (YES/no): YES
> Probing for Super-I/O at 0x2e/0x2f
> Trying family `National Semiconductor/ITE'...               No
> Trying family `SMSC'...                                     No
> Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
> Trying family `ITE'...                                      No
> Probing for Super-I/O at 0x4e/0x4f
> Trying family `National Semiconductor/ITE'...               Yes
> Found unknown chip with ID 0x8586
> ....
> Now follows a summary of the probes I have just done.
> Just press ENTER to continue:
> 
> Driver `k10temp' (autoloaded):
>   * Chip `AMD Family 15h thermal sensors' (confidence: 9)
> 
> No modules to load, skipping modules configuration.
> 
> Unloading cpuid... OK
> 
> 
> $sudo pwmconfig
> ...
> /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
> 
> 
> On Wed, Jul 15, 2015 at 10:37 AM, Guenter Roeck <linux@roeck-us.net> wrote:
> 
> > On Wed, Jul 15, 2015 at 09:46:26AM +0200, Jean Delvare wrote:
> > > Hi Dev,
> > >
> > > On Tue, 14 Jul 2015 23:27:41 -0400, Dev Anand wrote:
> > > > I got myself a Lenovo z50-75. The fan is always on. And, sensors-detect
> > > > reports the following.
> > > >
> > > > Trying family `ITE'...                                      No
> > > >
> > > > Probing for Super-I/O at 0x4e/0x4f
> > > >
> > > > Trying family `National Semiconductor/ITE'...               Yes
> > > >
> > > > Found unknown chip with ID 0x8586
> > > >
> > > >
> > > > Appears to be IT8586E. Are there any plans of supporting this chip. I
> > don't
> > > > see it listed on the http://www.lm-sensors.org/wiki/Devices web site.
> > >
> > > It's not listed on ITE's website either. Never heard of that chip. I've
> > > added an entry in the wiki, with your request. But without a datasheet
> > > there's nothing we can do.
> > >
> > I think this is an embedded controller, not a legacy Super-IO chip.
> > Trying the ACPI drivers you mentioned below might be the best option.
> >
> > Guenter
> >
> > > Please note that on a laptop the fan is most certainly controlled by
> > > ACPI anyway so a driver for the IT8586E would not necessarily help. If
> > > the fan does not behave the way it should, you should check the BIOS
> > > options and report the problem to the linux-acpi ACPI.
> > >
> > > Also check the thinkpad_acpi and ideapad-laptop kernel drivers. There
> > > is no explicit mention of your laptop model there but other Lenovo
> > > laptops are supported so maybe support for your model could/should be
> > > added there.
> > >
> > > --
> > > Jean Delvare
> > > SUSE L3 Support
> > >
> > > _______________________________________________
> > > lm-sensors mailing list
> > > lm-sensors@lm-sensors.org
> > > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> >

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

  parent reply	other threads:[~2015-07-15 17:44 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-15  3:27 [lm-sensors] support for IT8586E Dev Anand
2015-07-15  7:46 ` Jean Delvare
2015-07-15 14:37 ` Guenter Roeck
2015-07-15 16:27 ` Dev Anand
2015-07-15 17:44 ` Guenter Roeck [this message]
2015-07-15 17:46 ` Jean Delvare

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150715174453.GA30206@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=lm-sensors@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.