From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: david.vrabel@citrix.com, roger.pau@citrix.com,
elena.ufimtseva@oracle.com, stefano.stabellini@eu.citrix.com,
tim@xen.org, jbeulich@suse.com, andrew.cooper3@citrix.com,
ian.campbell@citrix.com, ian.jackson@eu.citrix.com,
xen-devel@lists.xenproject.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 5/6] xen/x86/pvh: Add 32-bit PVH initialization code
Date: Fri, 17 Jul 2015 11:21:36 -0400 [thread overview]
Message-ID: <20150717152136.GC18085@l.oracle.com> (raw)
In-Reply-To: <1437083021-24488-6-git-send-email-boris.ostrovsky@oracle.com>
On Thu, Jul 16, 2015 at 05:43:40PM -0400, Boris Ostrovsky wrote:
> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
> ---
> Changes in v2:
> * Some code reshuffling due to changes in patch 1.
>
> arch/x86/xen/enlighten.c | 4 ----
> arch/x86/xen/smp.c | 16 +++++++++-------
> arch/x86/xen/xen-head.S | 13 ++++++++++++-
> 3 files changed, 21 insertions(+), 12 deletions(-)
>
> diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
> index d665b1d..9eb395f 100644
> --- a/arch/x86/xen/enlighten.c
> +++ b/arch/x86/xen/enlighten.c
> @@ -1461,10 +1461,6 @@ static void __init xen_pvh_early_guest_init(void)
>
> xen_pvh_early_cpu_init(0);
> xen_pvh_set_cr_flags(0);
> -
> -#ifdef CONFIG_X86_32
> - BUG(); /* PVH: Implement proper support. */
> -#endif
> }
> #endif /* CONFIG_XEN_PVH */
>
> diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
> index 33a4529..f8c5d23 100644
> --- a/arch/x86/xen/smp.c
> +++ b/arch/x86/xen/smp.c
> @@ -372,11 +372,8 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
>
> gdt = get_cpu_gdt_table(cpu);
>
> -#ifdef CONFIG_X86_32
> - /* Note: PVH is not yet supported on x86_32. */
> - ctxt->user_regs.fs = __KERNEL_PERCPU;
> - ctxt->user_regs.gs = __KERNEL_STACK_CANARY;
> -#endif
> + ctxt->user_regs.esp = idle->thread.sp0 - sizeof(struct pt_regs);
> + ctxt->ctrlreg[3] = xen_pfn_to_cr3(virt_to_mfn(swapper_pg_dir));
>
> if (!xen_feature(XENFEAT_auto_translated_physmap)) {
> ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
> @@ -403,6 +400,8 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
> ctxt->kernel_sp = idle->thread.sp0;
>
> #ifdef CONFIG_X86_32
> + ctxt->user_regs.fs = __KERNEL_PERCPU;
> + ctxt->user_regs.gs = __KERNEL_STACK_CANARY;
> ctxt->event_callback_cs = __KERNEL_CS;
> ctxt->failsafe_callback_cs = __KERNEL_CS;
> #else
> @@ -424,11 +423,14 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
> */
> ctxt->user_regs.eip =
> (unsigned long)xen_pvh_early_cpu_init_secondary;
> +#ifdef CONFIG_X86_64
> ctxt->user_regs.rdi = cpu;
> +#else
> + *((uint32_t *)ctxt->user_regs.esp + 1) = cpu;
> +#endif
> }
> #endif
> - ctxt->user_regs.esp = idle->thread.sp0 - sizeof(struct pt_regs);
> - ctxt->ctrlreg[3] = xen_pfn_to_cr3(virt_to_mfn(swapper_pg_dir));
> +
> if (HYPERVISOR_vcpu_op(VCPUOP_initialise, cpu, ctxt))
> BUG();
>
> diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
> index 944b08b..eada11b 100644
> --- a/arch/x86/xen/xen-head.S
> +++ b/arch/x86/xen/xen-head.S
> @@ -55,7 +55,11 @@ ENTRY(startup_xen)
> * @cpu: this cpu number (%rdi)
> */
> ENTRY(xen_pvh_early_cpu_init)
> +#ifdef CONFIG_X86_64
> mov %rbx, -8(%rsp)
> +#else
> + mov %ebx, -4(%esp)
> +#endif
> xor %esi, %esi
> jmp 1f
>
> @@ -70,13 +74,20 @@ ENTRY(xen_pvh_early_cpu_init_secondary)
>
> mov $MSR_EFER, %ecx
> rdmsr
> +#ifdef CONFIG_X86_64
> bts $_EFER_SCE, %eax
> -
> +#endif
> bt $20, %ebx
> jnc 2f /* No NX, skip setting it */
> bts $_EFER_NX, %eax
> 2: wrmsr
> +
> +#ifdef CONFIG_X86_64
> mov -8(%rsp), %rbx
> +#else
> + mov -4(%esp), %ebx
> +#endif
> +
> #ifdef CONFIG_SMP
> cmp $0, %esi
> jne cpu_bringup_and_idle
> --
> 1.8.1.4
>
next prev parent reply other threads:[~2015-07-17 15:21 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-16 21:43 [PATCH v2 0/6] 32-bit PVH domU support Boris Ostrovsky
2015-07-16 21:43 ` Boris Ostrovsky
2015-07-16 21:43 ` [PATCH v2 1/6] xen/x86/pvh: Save %rbx in xen_pvh_early_cpu_init() Boris Ostrovsky
2015-07-17 15:09 ` Konrad Rzeszutek Wilk
2015-07-17 15:09 ` Konrad Rzeszutek Wilk
2015-07-16 21:43 ` Boris Ostrovsky
2015-07-16 21:43 ` [PATCH v2 2/6] xen/x86: Remove unnecessary memset() call Boris Ostrovsky
2015-07-16 21:43 ` Boris Ostrovsky
2015-07-16 21:43 ` [PATCH v2 3/6] xen/x86/pvh: Properly set page tables for 32-bit PVH guests Boris Ostrovsky
2015-07-16 21:43 ` Boris Ostrovsky
2015-07-16 21:43 ` [PATCH v2 4/6] xen/x86/pvh: Set up descriptors " Boris Ostrovsky
2015-07-16 21:43 ` Boris Ostrovsky
2015-07-17 15:21 ` Konrad Rzeszutek Wilk
2015-07-17 15:21 ` Konrad Rzeszutek Wilk
2015-07-17 15:36 ` Boris Ostrovsky
2015-07-17 16:43 ` Konrad Rzeszutek Wilk
2015-07-17 17:52 ` Boris Ostrovsky
2015-07-21 15:32 ` Boris Ostrovsky
2015-07-21 15:32 ` Boris Ostrovsky
2015-07-17 17:52 ` Boris Ostrovsky
2015-07-17 16:43 ` Konrad Rzeszutek Wilk
2015-07-17 15:36 ` Boris Ostrovsky
2015-07-16 21:43 ` [PATCH v2 5/6] xen/x86/pvh: Add 32-bit PVH initialization code Boris Ostrovsky
2015-07-16 21:43 ` Boris Ostrovsky
2015-07-17 15:21 ` Konrad Rzeszutek Wilk
2015-07-17 15:21 ` Konrad Rzeszutek Wilk [this message]
2015-07-16 21:43 ` [PATCH v2 6/6] xen/x86/pvh: Allow building 32-bit PVH guests Boris Ostrovsky
2015-07-16 21:43 ` Boris Ostrovsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150717152136.GC18085@l.oracle.com \
--to=konrad.wilk@oracle.com \
--cc=andrew.cooper3@citrix.com \
--cc=boris.ostrovsky@oracle.com \
--cc=david.vrabel@citrix.com \
--cc=elena.ufimtseva@oracle.com \
--cc=ian.campbell@citrix.com \
--cc=ian.jackson@eu.citrix.com \
--cc=jbeulich@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=roger.pau@citrix.com \
--cc=stefano.stabellini@eu.citrix.com \
--cc=tim@xen.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.