Re: [RFC PATCH 0/2] net: macb: Add mdio driver for accessing multiple phy devices

[Andrew Lunn <andrew@lunn.ch>]

On Mon, Jul 20, 2015 at 03:30:36PM +0200, Michal Simek wrote:
> Hi Nicolas,
> 
> have you had a time to look at this?
> 
> Thanks,
> Michal
> 
> On 07/13/2015 06:48 AM, Punnaiah Choudary Kalluri wrote:
> > This patch is to add support for the design that has multiple ethernet
> > mac controllers and single mdio bus connected to multiple phy devices.
> > i.e mdio lines are connected to any of the ethernet mac controller and
> > all the phy devices will be accessed using the phy maintenance interface
> > in that mac controller.
> > 
> >  ______                   _____
> > |      |                 |PHY0 |
> > | MAC0 |-----------------|     |
> > |______|       |         |_____|
> >                |           
> >  ______        |          _____
> > |      |       |         |     |
> > | MAC1 |       |_________|PHY1 | 
> > |______|                 |____ |
> > 
> > So, i come up with two implementations for addressing the above configuration.
> > 
> > Implementation 1:
> >  Have separate driver for mdio bus
> >  Create a DT node for all the PHY devices connected to the mdio bus
> >  This driver will share the register space of the mac controller that has
> >  mdio bus connected.  
> > 

Hi Michal

The above it what Marvell, Freescale FEC and probably others do. It is
well defined in Documentation/devicetree/bindings/net/ethernet.txt
that you can have a phy-handle property containing a phandle to the
actual phy device on some random MDIO bus.

     Andrew