[U-Boot] [PATCH v3 03/15] imx: mx6ul: Update imx registers head file

[Marek Vasut <marex@denx.de>]

On Monday, July 20, 2015 at 01:28:23 PM, Peng Fan wrote:
> 1. Update imx register base address for i.MX6UL.
> 2. Remove duplicated MXS_APBH/GPMI/BCH_BASE.
> 3. Remove #ifdef for register addresses that equal to
>    "AIPS2_OFF_BASE_ADDR + 0x34000" for different chips.
> 4. According fuse map, complete fuse_bank4_regs.
> 5. Move AIPS3_ARB_BASE_ADDR and AIPS3_ARB_END_ADDR out of #ifdef
> CONFIG_MX6SX, because we can use runtime check
> 
> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>

[...]

> @@ -296,7 +300,6 @@
>  #define AIPS3_CONFIG_BASE_ADDR      (AIPS3_ARB_BASE_ADDR + 0x7C000)
>  #define ADC1_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x80000)
>  #define ADC2_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x84000)
> -#define WDOG3_BASE_ADDR             (AIPS3_ARB_BASE_ADDR + 0x88000)
>  #define ECSPI5_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x8C000)
>  #define HS_BASE_ADDR                (AIPS3_ARB_BASE_ADDR + 0x90000)
>  #define MU_MCU_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x94000)
> @@ -308,12 +311,17 @@
>  #define PWM7_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xAC000)
>  #define PWM8_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xB0000)
>  #endif
> +#define MX6SX_WDOG3_BASE_ADDR       (AIPS3_ARB_BASE_ADDR + 0x88000)
> +
> +/* only for i.MX6SX/UL */
> +#define WDOG3_BASE_ADDR (is_cpu_type(MXC_CPU_MX6UL) ?	\
> +			 MX6UL_WDOG3_BASE_ADDR :  MX6SX_WDOG3_BASE_ADDR)

Nitpick -- this should probably be protected by #ifndef __ASSELMBLY__ .

Best regards,
Marek Vasut