diff for duplicates of <20150720205317.GA19788@maud> diff --git a/a/1.txt b/N1/1.txt index 5e1e184..c35a8a6 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -2,7 +2,7 @@ Iteaduino Plus A10 is a breakout board + Itead Core A10. It features 1GB RAM, has most of the A10 pins on a .1" header, 2 USB ports, 1 OTG USB port, Ethernet, HDMI, SATA, Speaker/Microphone 3.5mm jacks and an SD card slot. -Signed-off-by: Josef Gajdusek <atx@atx.name> +Signed-off-by: Josef Gajdusek <atx-MwjtXicnQwU@public.gmane.org> --- It does not look like there are any other breakout boards for Core A10/A20 modules. @@ -30,7 +30,7 @@ index 0000000..985e155 +++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts @@ -0,0 +1,202 @@ +/* -+ * Copyright 2015 Josef Gajdusek <atx@atx.name> ++ * Copyright 2015 Josef Gajdusek <atx-MwjtXicnQwU@public.gmane.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual @@ -124,7 +124,7 @@ index 0000000..985e155 + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + -+ axp209: pmic at 34 { ++ axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; @@ -151,7 +151,7 @@ index 0000000..985e155 +&mdio { + status = "okay"; + -+ phy1: ethernet-phy at 1 { ++ phy1: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/a/content_digest b/N1/content_digest index 9eb85b2..f628d53 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,16 +1,26 @@ "ref\020150719134501.GA19235@maud\0" "ref\020150720101527.GV28632@lukather\0" - "From\0atx@atx.name (Josef Gajdusek)\0" + "From\0Josef Gajdusek <atx-MwjtXicnQwU@public.gmane.org>\0" "Subject\0[PATCH v2] ARM: dts: sun4i: Add Iteaduino Plus A10\0" "Date\0Mon, 20 Jul 2015 22:53:18 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Cc\0devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" + robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org + pawel.moll-5wv7dgnIgG8@public.gmane.org + mark.rutland-5wv7dgnIgG8@public.gmane.org + ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org + galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org + linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org + " linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org\0" "\00:1\0" "b\0" "Iteaduino Plus A10 is a breakout board + Itead Core A10. It features 1GB RAM,\n" "has most of the A10 pins on a .1\" header, 2 USB ports, 1 OTG USB port,\n" "Ethernet, HDMI, SATA, Speaker/Microphone 3.5mm jacks and an SD card slot.\n" "\n" - "Signed-off-by: Josef Gajdusek <atx@atx.name>\n" + "Signed-off-by: Josef Gajdusek <atx-MwjtXicnQwU@public.gmane.org>\n" "---\n" "It does not look like there are any other breakout boards for Core A10/A20\n" "modules.\n" @@ -38,7 +48,7 @@ "+++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts\n" "@@ -0,0 +1,202 @@\n" "+/*\n" - "+ * Copyright 2015 Josef Gajdusek <atx@atx.name>\n" + "+ * Copyright 2015 Josef Gajdusek <atx-MwjtXicnQwU@public.gmane.org>\n" "+ *\n" "+ * This file is dual-licensed: you can use it either under the terms\n" "+ * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -132,7 +142,7 @@ "+\tpinctrl-0 = <&i2c0_pins_a>;\n" "+\tstatus = \"okay\";\n" "+\n" - "+\taxp209: pmic at 34 {\n" + "+\taxp209: pmic@34 {\n" "+\t\treg = <0x34>;\n" "+\t\tinterrupts = <0>;\n" "+\t};\n" @@ -159,7 +169,7 @@ "+&mdio {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tphy1: ethernet-phy at 1 {\n" + "+\tphy1: ethernet-phy@1 {\n" "+\t\treg = <1>;\n" "+\t};\n" "+};\n" @@ -242,4 +252,4 @@ "-- \n" 2.3.6 -64a4758e5769f7cfeb0d0f185ecb8eb38be5ae8f3a0549a77f77113b0e174e6e +ad6d58b8764f46922a6736ff9b0fc053183420679ba958c706b25777de35ef3f
diff --git a/a/1.txt b/N2/1.txt index 5e1e184..b47b420 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -124,7 +124,7 @@ index 0000000..985e155 + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + -+ axp209: pmic at 34 { ++ axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; @@ -151,7 +151,7 @@ index 0000000..985e155 +&mdio { + status = "okay"; + -+ phy1: ethernet-phy at 1 { ++ phy1: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/a/content_digest b/N2/content_digest index 9eb85b2..69eff7f 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,9 +1,19 @@ "ref\020150719134501.GA19235@maud\0" "ref\020150720101527.GV28632@lukather\0" - "From\0atx@atx.name (Josef Gajdusek)\0" + "From\0Josef Gajdusek <atx@atx.name>\0" "Subject\0[PATCH v2] ARM: dts: sun4i: Add Iteaduino Plus A10\0" "Date\0Mon, 20 Jul 2015 22:53:18 +0200\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Maxime Ripard <maxime.ripard@free-electrons.com>\0" + "Cc\0devicetree@vger.kernel.org" + robh+dt@kernel.org + pawel.moll@arm.com + mark.rutland@arm.com + ijc+devicetree@hellion.org.uk + galak@codeaurora.org + linux@arm.linux.org.uk + linux-arm-kernel@lists.infradead.org + linux-kernel@vger.kernel.org + " linux-sunxi@googlegroups.com\0" "\00:1\0" "b\0" "Iteaduino Plus A10 is a breakout board + Itead Core A10. It features 1GB RAM,\n" @@ -132,7 +142,7 @@ "+\tpinctrl-0 = <&i2c0_pins_a>;\n" "+\tstatus = \"okay\";\n" "+\n" - "+\taxp209: pmic at 34 {\n" + "+\taxp209: pmic@34 {\n" "+\t\treg = <0x34>;\n" "+\t\tinterrupts = <0>;\n" "+\t};\n" @@ -159,7 +169,7 @@ "+&mdio {\n" "+\tstatus = \"okay\";\n" "+\n" - "+\tphy1: ethernet-phy at 1 {\n" + "+\tphy1: ethernet-phy@1 {\n" "+\t\treg = <1>;\n" "+\t};\n" "+};\n" @@ -242,4 +252,4 @@ "-- \n" 2.3.6 -64a4758e5769f7cfeb0d0f185ecb8eb38be5ae8f3a0549a77f77113b0e174e6e +0b5cbdb763d1ce17d68a2dc6828533757e9db2af1b64f23c69e4d90a7f69886e
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.