All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Dudley Du <dudl@cypress.com>
Cc: mark.rutland@arm.com, robh+dt@kernel.org, rydberg@euromail.se,
	bleung@google.com, jmmahler@gmail.com,
	devicetree@vger.kernel.org, linux-input@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 6/7] input: cyapa: add of match device support and description document
Date: Mon, 20 Jul 2015 17:15:29 -0700	[thread overview]
Message-ID: <20150721001529.GF15528@dtor-ws> (raw)
In-Reply-To: <1434358897-24668-7-git-send-email-dudl@cypress.com>

On Mon, Jun 15, 2015 at 05:01:36PM +0800, Dudley Du wrote:
> Add of_match_device mechanism support for Cypress trackpad device, and
> add the sample description document of adding the trackpad device node in
> device tree.
> TEST=test on Chromebook.
> 
> Signed-off-by: Dudley Du <dudl@cypress.com>
> ---
>  .../devicetree/bindings/input/cypress,cyapa.txt    | 44 ++++++++++++++++++++++
>  .../devicetree/bindings/vendor-prefixes.txt        |  1 +
>  drivers/input/mouse/cyapa.c                        | 10 +++++
>  3 files changed, 55 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/cypress,cyapa.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
> new file mode 100644
> index 0000000..9be2b44
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
> @@ -0,0 +1,44 @@
> +Cypress I2C Touchpad
> +
> +Required properties:
> +- compatible: must be "cypress,cyapa".
> +- reg: I2C address of the chip.
> +- interrupt-parent: a phandle for the interrupt controller (see interrupt
> +  binding[0]).
> +- interrupts: interrupt to which the chip is connected (see interrupt
> +  binding[0]).
> +
> +Optional properties:
> +- wakeup-source: touchpad can be used as a wakeup source.
> +- pinctrl-names: should be "default" (see pinctrl binding [1]).
> +- pinctrl-0: a phandle pointing to the pin settings for the device (see
> +  pinctrl binding [1]).
> +- vcc-supply: a phandle for the regulator supplying 3.3V power.

I do not see it being used in the driver?

> +
> +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
> +[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
> +
> +Example:
> +	&i2c0 {
> +		/* ... */
> +
> +		/* Cypress Gen3 touchpad */
> +		touchpad@67 {
> +			compatible = "cypress,cyapa";
> +			reg = <0x24>;
> +			interrupt-parent = <&gpio>;
> +			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
> +			wakeup-source;
> +		};
> +
> +		/* Cypress Gen5 and later touchpad */
> +		touchpad@24 {
> +			compatible = "cypress,cyapa";
> +			reg = <0x24>;
> +			interrupt-parent = <&gpio>;
> +			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
> +			wakeup-source;
> +		};
> +
> +		/* ... */
> +	};
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index ee2ce7b..e43d532 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -54,6 +54,7 @@ cortina	Cortina Systems, Inc.
>  cosmic	Cosmic Circuits
>  crystalfontz	Crystalfontz America, Inc.
>  cubietech	Cubietech, Ltd.
> +cypress	Cypress Semiconductor Corporation
>  dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
>  davicom	DAVICOM Semiconductor, Inc.
>  delta	Delta Electronics, Inc.
> diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
> index 4e69594..7b6d6d4 100644
> --- a/drivers/input/mouse/cyapa.c
> +++ b/drivers/input/mouse/cyapa.c
> @@ -25,6 +25,7 @@
>  #include <linux/uaccess.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/acpi.h>
> +#include <linux/of.h>
>  #include "cyapa.h"
>  
>  
> @@ -1562,12 +1563,21 @@ static const struct acpi_device_id cyapa_acpi_id[] = {
>  MODULE_DEVICE_TABLE(acpi, cyapa_acpi_id);
>  #endif
>  
> +#ifdef CONFIG_OF
> +static const struct of_device_id cyapa_of_match[] = {
> +	{ .compatible = "cypress,cyapa" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, cyapa_of_match);
> +#endif
> +
>  static struct i2c_driver cyapa_driver = {
>  	.driver = {
>  		.name = "cyapa",
>  		.owner = THIS_MODULE,
>  		.pm = &cyapa_pm_ops,
>  		.acpi_match_table = ACPI_PTR(cyapa_acpi_id),
> +		.of_match_table = of_match_ptr(cyapa_of_match),
>  	},
>  
>  	.probe = cyapa_probe,
> -- 
> 1.9.1
> 
> 
> ---------------------------------------------------------------
> This message and any attachments may contain Cypress (or its
> subsidiaries) confidential information. If it has been received
> in error, please advise the sender and immediately delete this
> message.
> ---------------------------------------------------------------
> 

-- 
Dmitry

  reply	other threads:[~2015-07-21  0:15 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-06-15  9:01 [PATCH v1 0/7] instruction of cyapa gen6 and proximity patches Dudley Du
2015-06-15  9:01 ` Dudley Du
2015-06-15  9:01 ` [PATCH v1 1/7] input: cyapa: change strings of gen5 to pip in the name when they are shared Dudley Du
     [not found]   ` <1434358897-24668-2-git-send-email-dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
2015-07-21  0:03     ` Dmitry Torokhov
2015-07-21  0:03       ` Dmitry Torokhov
2015-06-15  9:01 ` [PATCH v1 2/7] input: cyapa: add gen6 device module support in driver Dudley Du
     [not found]   ` <1434358897-24668-3-git-send-email-dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
2015-07-21  0:04     ` Dmitry Torokhov
2015-07-21  0:04       ` Dmitry Torokhov
     [not found] ` <1434358897-24668-1-git-send-email-dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
2015-06-15  9:01   ` [PATCH v1 3/7] input: cyapa: add proximity function support for gen5 and gen6 modules Dudley Du
2015-06-15  9:01     ` Dudley Du
     [not found]     ` <1434358897-24668-4-git-send-email-dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
2015-07-21  0:06       ` Dmitry Torokhov
2015-07-21  0:06         ` Dmitry Torokhov
2015-07-21  1:43         ` Dudley Du
2015-06-15  9:01   ` [PATCH v1 4/7] input: cyapa: fully support runtime suspend power management Dudley Du
2015-06-15  9:01     ` Dudley Du
     [not found]     ` <1434358897-24668-5-git-send-email-dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
2015-07-21  0:13       ` Dmitry Torokhov
2015-07-21  0:13         ` Dmitry Torokhov
2015-06-17 22:09   ` [PATCH v1 0/7] instruction of cyapa gen6 and proximity patches Jeremiah Mahler
2015-06-17 22:09     ` Jeremiah Mahler
2015-06-15  9:01 ` [PATCH v1 5/7] input: cyapa: add proximity and interrupt sysfs interfaces support Dudley Du
2015-06-15  9:01 ` [PATCH v1 6/7] input: cyapa: add of match device support and description document Dudley Du
2015-07-21  0:15   ` Dmitry Torokhov [this message]
2015-07-21  2:15     ` Dudley Du
2015-07-21  2:15       ` Dudley Du
2015-06-15  9:01 ` [PATCH v1 7/7] input: cyapa: add CYAP0002 Gen6 device for ACPI configuration Dudley Du
     [not found]   ` <1434358897-24668-8-git-send-email-dudl-+wT8y+m8/X5BDgjK7y7TUQ@public.gmane.org>
2015-07-21  0:17     ` Dmitry Torokhov
2015-07-21  0:17       ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150721001529.GF15528@dtor-ws \
    --to=dmitry.torokhov@gmail.com \
    --cc=bleung@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dudl@cypress.com \
    --cc=jmmahler@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=rydberg@euromail.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.