From: ulrik.debie-os@e2big.org
To: duson <dusonlin@emc.com.tw>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Dmitry Torokhov <dmitry.torokhov@gmail.com>
Subject: Re: [PATCH 2/2] Input - elantech: Add special check for fw_version 0x470f01 touchpad
Date: Tue, 28 Jul 2015 21:18:56 +0200 [thread overview]
Message-ID: <20150728191855.GA19870@lantern> (raw)
In-Reply-To: <93F83051-8AD8-41EA-9A43-CB1D32DA09E9@emc.com.tw>
Hi Duson,
Thanks for your update.
Your latest patch has 2 trailing whitespaces problems as shown by
checkpatch.pl.
There was another comment you probably overlooked in my previous mail:
> + if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY,
> + etd->samples)) {
Is this wise to run on all elantech hardware ? No regression ?
Currently it is called when hw_version = 2 and some other conditions in
the function elantech_set_range. That could be a hint that the range
hw_version 2->7 is probably ok, but what about hw_version 1 ?
Is it normal that the semantics of ETP_SAMPLE_QUERY on hw_version 2 is
totally different from the fw_version 0x470f01 ?
Assuming there are no regressions introduced by ETP_SAMPLE_QUERY, I
would change elantech_set_range to use the stored sample values instead
of querying for it again. That probably can be put in a separate patch.
Thanks,
Kind Regards,
Ulrik
On Thu, Jul 23, 2015 at 08:54:32AM +0800, duson wrote:
>
> It is no need to check the packet[0] for sanity check when doing
> elantech_packet_check_v4() function for fw_version = 0x470f01 touchpad.
>
> Signed-off by: Duson Lin <dusonlin@emc.com.tw>
> ---
> drivers/input/mouse/elantech.c | 26 +++++++++++++++++++++++---
> drivers/input/mouse/elantech.h | 1 +
> 2 files changed, 24 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
> index ce3d400..6c6c2bb 100644
> --- a/drivers/input/mouse/elantech.c
> +++ b/drivers/input/mouse/elantech.c
> @@ -784,6 +784,8 @@ static int elantech_packet_check_v4(struct psmouse *psmouse)
> unsigned char *packet = psmouse->packet;
> unsigned char packet_type = packet[3] & 0x03;
> bool sanity_check;
> + /* This represents the version of IC body. */
> + int ver = (etd->fw_version & 0x0f0000) >> 16;
>
> if (etd->tp_dev && (packet[3] & 0x0f) == 0x06)
> return PACKET_TRACKPOINT;
> @@ -796,9 +798,17 @@ static int elantech_packet_check_v4(struct psmouse *psmouse)
> */
> if (etd->crc_enabled)
> sanity_check = ((packet[3] & 0x08) == 0x00);
> - else
> - sanity_check = ((packet[0] & 0x0c) == 0x04 &&
> - (packet[3] & 0x1c) == 0x10);
> + else {
> + /*
> + * The sanity check only need to check packet[3]
> + * when IC_body = 7 and PID = 0x2A
> + */
> + if (ver == 7 && etd->samples[1] == 0x2A)
> + sanity_check = ((packet[3] & 0x1c) == 0x10);
> + else
> + sanity_check = ((packet[0] & 0x0c) == 0x04 &&
> + (packet[3] & 0x1c) == 0x10);
> + }
>
> if (!sanity_check)
> return PACKET_UNKNOWN;
> @@ -1117,6 +1127,7 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse,
> * Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons
> * Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons
> * Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**)
> + * Fujitsu T725 0x470f01 05, 12, 09 2 hw buttons
> * Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons
> * Lenovo L430 0x350f02 b9, 15, 0c 2 hw buttons (*)
> * Lenovo L530 0x350f02 b9, 15, 0c 2 hw buttons (*)
> @@ -1648,6 +1659,15 @@ int elantech_init(struct psmouse *psmouse)
> etd->capabilities[0], etd->capabilities[1],
> etd->capabilities[2]);
>
> + if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY,
> + etd->samples)) {
> + psmouse_err(psmouse, "failed to query sample data.\n");
> + goto init_fail;
> + }
> + psmouse_info(psmouse,
> + "Elan sample query result 0x%02x, 0x%02x, 0x%02x.\n",
> + etd->samples[0], etd->samples[1], etd->samples[2]);
> +
> if (elantech_set_absolute_mode(psmouse)) {
> psmouse_err(psmouse,
> "failed to put touchpad into absolute mode.\n");
> diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
> index f965d15..e1cbf40 100644
> --- a/drivers/input/mouse/elantech.h
> +++ b/drivers/input/mouse/elantech.h
> @@ -129,6 +129,7 @@ struct elantech_data {
> unsigned char reg_26;
> unsigned char debug;
> unsigned char capabilities[3];
> + unsigned char samples[3];
> bool paritycheck;
> bool jumpy_cursor;
> bool reports_pressure;
>
>
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-07-28 19:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-23 0:54 [PATCH 2/2] Input - elantech: Add special check for fw_version 0x470f01 touchpad duson
2015-07-28 19:18 ` ulrik.debie-os [this message]
2015-08-02 3:18 ` DusonLin
2015-08-02 3:18 ` DusonLin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150728191855.GA19870@lantern \
--to=ulrik.debie-os@e2big.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dusonlin@emc.com.tw \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.