From: "J. Bruce Fields" <bfields@fieldses.org>
To: Kinglong Mee <kinglongmee@gmail.com>
Cc: "linux-nfs@vger.kernel.org" <linux-nfs@vger.kernel.org>,
tigran.mkrtchyan@desy.de
Subject: Re: [PATCH v2] 4.0 setclientid: More cases for setclientid behavior
Date: Thu, 30 Jul 2015 11:38:34 -0400 [thread overview]
Message-ID: <20150730153834.GH9349@fieldses.org> (raw)
In-Reply-To: <55B9EBE4.9040303@gmail.com>
On Thu, Jul 30, 2015 at 05:18:28PM +0800, Kinglong Mee wrote:
> More cases of RFC 7530 16.33.5 setclientid/setclientid_confirm behavior.
>
> v2, As Bruce said,
>
> "I'd rather not change the test code from CID2 to CID4a. That kind of
> change makes it hard to compare results across different versions of
> pynfs."
OK, thanks.--b.
>
> Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
> ---
> nfs4.0/servertests/st_setclientid.py | 217 ++++++++++++++++++++++++++++++++++-
> 1 file changed, 213 insertions(+), 4 deletions(-)
>
> diff --git a/nfs4.0/servertests/st_setclientid.py b/nfs4.0/servertests/st_setclientid.py
> index e9d0052..ca795f7 100644
> --- a/nfs4.0/servertests/st_setclientid.py
> +++ b/nfs4.0/servertests/st_setclientid.py
> @@ -61,10 +61,9 @@ def testInUse(t, env):
> """
> c1 = env.c1
> c2 = env.c2
> - c1.init_connection("Badid_for_%s_pid=%i" % (t.code, os.getpid()),
> - verifier=c1.verifier)
> - ops = [c2.setclientid(id="Badid_for_%s_pid=%i" % (t.code, os.getpid()),
> - verifier=c1.verifier)]
> + clid = "Clid_for_%s_pid=%i" % (t.code, os.getpid())
> + c1.init_connection(clid, verifier=c1.verifier)
> + ops = [c2.setclientid(clid, verifier=c1.verifier)]
> res = c2.compound(ops)
> check(res, NFS4ERR_CLID_INUSE, "SETCLIENTID with same nfs_client_id.id")
>
> @@ -115,6 +114,216 @@ def testAllCases(t, env):
> res = c.compound([c.setclientid(id=id, verifier='')])
> check(res)
>
> +def testCallbackInfoUpdate(t, env):
> + """A probable callback information update and records
> + an unconfirmed { v, x, c, k, t } and leaves the
> + confirmed { v, x, c, l, s } in place, such that t != s.
> +
> + FLAGS: setclientid all
> + DEPEND: INIT
> + CODE: CID4a
> + """
> + c1 = env.c1
> + clid = "Clid_for_%s_pid=%i" % (t.code, os.getpid())
> +
> + # confirmed { v, x, c, l, s }
> + (cclientid, cconfirm) = c1.init_connection(clid, verifier=c1.verifier)
> +
> + # request { v, x, c, k, s } --> unconfirmed { v, x, c, k, t }
> + ops = [c1.setclientid(clid, verifier=c1.verifier)]
> + res = c1.compound(ops)
> + check(res)
> +
> + tclientid = res.resarray[0].switch.switch.clientid
> + tconfirm = res.resarray[0].switch.switch.setclientid_confirm
> +
> + # (t != s)
> + if tconfirm == '\x00\x00\x00\x00\x00\x00\x00\x00':
> + t.fail("Got clientid confirm verifier with all zero!")
> +
> + if cclientid != tclientid:
> + t.fail("Return a different clientID for callback information updating!")
> +
> + if tconfirm == cconfirm:
> + t.fail("Return a same confirm for callback information updating!")
> +
> +def testConfirmedDiffVerifier(t, env):
> + """The server has previously recorded a confirmed { u, x, c, l, s }
> + record such that v != u, l may or may not equal k, and has not
> + recorded any unconfirmed { *, x, *, *, * } record for x. The
> + server records an unconfirmed { v, x, d, k, t } (d != c, t != s).
> +
> + FLAGS: setclientid all
> + DEPEND: INIT
> + CODE: CID4b
> + """
> + c1 = env.c1
> + clid = "Clid_for_%s_pid=%i" % (t.code, os.getpid())
> +
> + # confirmed { u, x, c, l, s }
> + (cclientid, cconfirm) = c1.init_connection(clid, verifier=c1.verifier)
> +
> + # request { v, x, c, k, s } --> unconfirmed { v, x, d, k, t }
> + ops = [c1.setclientid(clid, verifier="diff")]
> + res = c1.compound(ops)
> + check(res)
> +
> + tclientid = res.resarray[0].switch.switch.clientid
> + tconfirm = res.resarray[0].switch.switch.setclientid_confirm
> +
> + # (d != c, t != s)
> + if tconfirm == '\x00\x00\x00\x00\x00\x00\x00\x00':
> + t.fail("Got clientid confirm verifier with all zero!")
> +
> + if cclientid == tclientid:
> + t.fail("Return a same clientID for different verifier!")
> +
> + if tconfirm == cconfirm:
> + t.fail("Return a same confirm for different verifier!")
> +
> +def testConfUnConfDiffVerifier1(t, env):
> + """The server has previously recorded a confirmed { u, x, c, l, s }
> + record such that v != u, l may or may not equal k, and recorded an
> + unconfirmed { w, x, d, m, t } record such that c != d, t != s, m
> + may or may not equal k, m may or may not equal l, and k may or may
> + not equal l. Whether w == v or w != v makes no difference. The
> + server simply removes the unconfirmed { w, x, d, m, t } record and
> + replaces it with an unconfirmed { v, x, e, k, r } record, such
> + that e != d, e != c, r != t, r != s.
> +
> + FLAGS: setclientid all
> + DEPEND: INIT
> + CODE: CID4c
> + """
> + c1 = env.c1
> + clid = "Clid_for_%s_pid=%i" % (t.code, os.getpid())
> +
> + # confirmed { u, x, c, l, s }
> + (cclientid, cconfirm) = c1.init_connection(clid, verifier=c1.verifier)
> +
> + # unconfirmed { w, x, d, m, t }
> + ops = [c1.setclientid(clid, verifier="unconf")]
> + res = c1.compound(ops)
> + check(res)
> +
> + uclientid = res.resarray[0].switch.switch.clientid
> + uconfirm = res.resarray[0].switch.switch.setclientid_confirm
> +
> + # request { v, x, c, k, s } --> unconfirmed { v, x, e, k, r }
> + # (v == w)
> + ops = [c1.setclientid(clid, verifier="unconf")]
> + res = c1.compound(ops)
> + check(res)
> +
> + tclientid = res.resarray[0].switch.switch.clientid
> + tconfirm = res.resarray[0].switch.switch.setclientid_confirm
> +
> + # removes the unconfirmed { w, x, d, m, t }
> + ops = [c1.setclientid_confirm_op(uclientid, uconfirm)]
> + res = c1.compound(ops)
> + check(res, NFS4ERR_STALE_CLIENTID)
> +
> + # (e != d, e != c, r != t, r != s)
> + if tconfirm == '\x00\x00\x00\x00\x00\x00\x00\x00':
> + t.fail("Got clientid confirm verifier with all zero!")
> +
> + if cclientid == tclientid or uclientid == tclientid:
> + t.fail("Return a same clientID for different verifier!")
> +
> + if tconfirm == cconfirm or tconfirm == uconfirm:
> + t.fail("Return a same confirm for different verifier!")
> +
> +def testConfUnConfDiffVerifier2(t, env):
> + """Whether w == v or w != v makes no difference.
> +
> + FLAGS: setclientid all
> + DEPEND: INIT
> + CODE: CID4d
> + """
> + c1 = env.c1
> + clid = "Clid_for_%s_pid=%i" % (t.code, os.getpid())
> +
> + # confirmed { u, x, c, l, s }
> + (cclientid, cconfirm) = c1.init_connection(clid, verifier=c1.verifier)
> +
> + # unconfirmed { w, x, d, m, t }
> + ops = [c1.setclientid(clid, verifier="unconf")]
> + res = c1.compound(ops)
> + check(res)
> +
> + uclientid = res.resarray[0].switch.switch.clientid
> + uconfirm = res.resarray[0].switch.switch.setclientid_confirm
> +
> + # request { v, x, c, k, s } --> unconfirmed { v, x, e, k, r }
> + # (v != w)
> + ops = [c1.setclientid(clid, verifier="testconf")]
> + res = c1.compound(ops)
> + check(res)
> +
> + tclientid = res.resarray[0].switch.switch.clientid
> + tconfirm = res.resarray[0].switch.switch.setclientid_confirm
> +
> + # removes the unconfirmed { w, x, d, m, t }
> + ops = [c1.setclientid_confirm_op(uclientid, uconfirm)]
> + res = c1.compound(ops)
> + check(res, NFS4ERR_STALE_CLIENTID)
> +
> + # (e != d, e != c, r != t, r != s)
> + if tconfirm == '\x00\x00\x00\x00\x00\x00\x00\x00':
> + t.fail("Got clientid confirm verifier with all zero!")
> +
> + if cclientid == tclientid or uclientid == tclientid:
> + t.fail("Return a same clientID for different verifier!")
> +
> + if tconfirm == cconfirm or tconfirm == uconfirm:
> + t.fail("Return a same confirm for different verifier!")
> +
> +def testUnConfReplaced(t, env):
> + """The server has no confirmed { *, x, *, *, * } for x. It may or
> + may not have recorded an unconfirmed { u, x, c, l, s }, where l
> + may or may not equal k, and u may or may not equal v. Any
> + unconfirmed record { u, x, c, l, * }, regardless of whether u == v
> + or l == k, is replaced with an unconfirmed record { v, x, d, k, t}
> + where d != c, t != s.
> +
> + FLAGS: setclientid all
> + DEPEND: INIT
> + CODE: CID4e
> + """
> + c1 = env.c1
> + clid = "Clid_for_%s_pid=%i" % (t.code, os.getpid())
> +
> + # unconfirmed { w, x, d, m, t }
> + ops = [c1.setclientid(clid, verifier="unconf")]
> + res = c1.compound(ops)
> + check(res)
> +
> + uclientid = res.resarray[0].switch.switch.clientid
> + uconfirm = res.resarray[0].switch.switch.setclientid_confirm
> +
> + # request { v, x, c, k, s } --> unconfirmed { v, x, d, k, t }
> + ops = [c1.setclientid(clid, verifier="diff")]
> + res = c1.compound(ops)
> + check(res)
> +
> + tclientid = res.resarray[0].switch.switch.clientid
> + tconfirm = res.resarray[0].switch.switch.setclientid_confirm
> +
> + # removes the unconfirmed { w, x, d, m, t }
> + ops = [c1.setclientid_confirm_op(uclientid, uconfirm)]
> + res = c1.compound(ops)
> + check(res, NFS4ERR_STALE_CLIENTID)
> +
> + # (d != c, t != s)
> + if tconfirm == '\x00\x00\x00\x00\x00\x00\x00\x00':
> + t.fail("Got clientid confirm verifier with all zero!")
> +
> + if uclientid == tclientid:
> + t.fail("Return a same clientID for different verifier!")
> +
> + if tconfirm == uconfirm:
> + t.fail("Return a same confirm for different verifier!")
> +
> def testLotsOfClients(t, env):
> """SETCLIENTID called multiple times
>
> --
> 2.4.3
prev parent reply other threads:[~2015-07-30 15:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-28 11:46 [PATCH 1/4] 4.0 setclientid: More cases for setclientid behavior Kinglong Mee
2015-07-29 19:07 ` J. Bruce Fields
2015-07-30 9:18 ` [PATCH v2] " Kinglong Mee
2015-07-30 15:38 ` J. Bruce Fields [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150730153834.GH9349@fieldses.org \
--to=bfields@fieldses.org \
--cc=kinglongmee@gmail.com \
--cc=linux-nfs@vger.kernel.org \
--cc=tigran.mkrtchyan@desy.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.