From: Vincent Pelletier <plr.vincent@gmail.com>
To: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: linux-leds@vger.kernel.org, linux-acpi@vger.kernel.org
Subject: Re: leds-gpio on x86
Date: Thu, 6 Aug 2015 20:18:20 +0200 [thread overview]
Message-ID: <20150806201820.5ca0764d@x2> (raw)
In-Reply-To: <20150806173558.GZ1540@lahna.fi.intel.com>
On Thu, 6 Aug 2015 20:35:58 +0300, Mika Westerberg
<mika.westerberg@linux.intel.com> wrote:
> Do you know which GPIOs are used for leds?
>
> Since the GPIO host controller is listed in the DSDT, I think patching
> the leds device should be pretty simple.
That would be fantastic.
Green status: 62, green, active low
Red status: 63, red, active low
HDD racks: 70 to 75, red, active low
USB: 17, blue, active low
I tested all via sysfs with gpio-f7188x driver loaded (numbers above
are the values I wrote to /sys/class/gpio/register).
"green status" led works minimally out of the box: static-on when the
box is on, off otherwise (I would make it blink on S3, for example).
Regards,
--
Vincent Pelletier
next prev parent reply other threads:[~2015-08-06 18:18 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-05 20:09 leds-gpio on x86 Vincent Pelletier
2015-08-06 16:59 ` Mika Westerberg
2015-08-06 17:17 ` Vincent Pelletier
2015-08-06 17:35 ` Mika Westerberg
2015-08-06 18:18 ` Vincent Pelletier [this message]
2015-08-07 10:57 ` Mika Westerberg
2015-08-08 12:06 ` Vincent Pelletier
2015-08-11 12:00 ` Mika Westerberg
2015-08-11 17:42 ` Vincent Pelletier
2015-08-12 12:53 ` Mika Westerberg
2015-08-15 10:36 ` Vincent Pelletier
2015-08-17 21:08 ` Vincent Pelletier
2015-08-18 7:32 ` Vincent Pelletier
2015-08-18 9:02 ` Mika Westerberg
2015-08-18 11:38 ` Vincent Pelletier
2015-08-18 22:56 ` Vincent Pelletier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150806201820.5ca0764d@x2 \
--to=plr.vincent@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.