From: Lukas Wunner <lukas@wunner.de>
To: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH] drm/i915: Retry port as HDMI if dp_is_edp turns out to be false
Date: Sun, 9 Aug 2015 16:09:23 +0200 [thread overview]
Message-ID: <20150809140923.GA4871@wunner.de> (raw)
In-Reply-To: <1439122373-16425-1-git-send-email-chris@chris-wilson.co.uk>
Hi,
On Sun, Aug 09, 2015 at 01:12:53PM +0100, Chris Wilson wrote:
> We follow the VBT as to whether a DDI port is used for eDP and if so, do
> not attach a HDMI encoder to it. However there are machines for which
> the VBT eDP flag is a lie (shocking!) and we fail to detect a eDP link.
> Furthermore, on those machines the HDMI is connected to that DDI port
> but we ignore it.
>
> If we reorder our port initialisation to try the eDP setup first and
> if that fails we can treat it as a normal DP port along with a HDMI
> output. To accomplish this, we have to delay registering the DP
> connector/encoder until after we establish its final type.
>
> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88331
The existing code seems very carefully crafted, taking into account
the differences betweem various GPU generations etc, shuffling that
around might risk breakage. FWIW, I'm wondering if just adding a quirk
for this single Dell workstation might be justified?
Best regards,
Lukas
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
> ---
> drivers/gpu/drm/i915/intel_display.c | 27 ++++----
> drivers/gpu/drm/i915/intel_dp.c | 127 +++++++++++++++++------------------
> drivers/gpu/drm/i915/intel_drv.h | 6 +-
> 3 files changed, 79 insertions(+), 81 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 0bcd1b1aba4f..aab8dfd1f8a5 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -13941,7 +13941,6 @@ static void intel_setup_outputs(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_encoder *encoder;
> - bool dpd_is_edp = false;
>
> intel_lvds_init(dev);
>
> @@ -13983,31 +13982,33 @@ static void intel_setup_outputs(struct drm_device *dev)
> intel_ddi_init(dev, PORT_D);
> } else if (HAS_PCH_SPLIT(dev)) {
> int found;
> - dpd_is_edp = intel_dp_is_edp(dev, PORT_D);
>
> if (has_edp_a(dev))
> intel_dp_init(dev, DP_A, PORT_A);
>
> + found = 0;
> + /* PCH SDVOB multiplex with HDMIB */
> if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
> - /* PCH SDVOB multiplex with HDMIB */
> found = intel_sdvo_init(dev, PCH_SDVOB, true);
> if (!found)
> intel_hdmi_init(dev, PCH_HDMIB, PORT_B);
> - if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
> - intel_dp_init(dev, PCH_DP_B, PORT_B);
> }
> + if (!found && I915_READ(PCH_DP_B) & DP_DETECTED)
> + intel_dp_init(dev, PCH_DP_B, PORT_B);
>
> - if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
> - intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
> -
> - if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
> - intel_hdmi_init(dev, PCH_HDMID, PORT_D);
> -
> + found = 0;
> if (I915_READ(PCH_DP_C) & DP_DETECTED)
> - intel_dp_init(dev, PCH_DP_C, PORT_C);
> + found = intel_dp_init(dev, PCH_DP_C, PORT_C);
> + if (found != DRM_MODE_CONNECTOR_eDP &&
> + I915_READ(PCH_HDMIC) & SDVO_DETECTED)
> + intel_hdmi_init(dev, PCH_HDMIC, PORT_C);
>
> + found = 0;
> if (I915_READ(PCH_DP_D) & DP_DETECTED)
> - intel_dp_init(dev, PCH_DP_D, PORT_D);
> + found = intel_dp_init(dev, PCH_DP_D, PORT_D);
> + if (found != DRM_MODE_CONNECTOR_eDP &&
> + I915_READ(PCH_HDMID) & SDVO_DETECTED)
> + intel_hdmi_init(dev, PCH_HDMID, PORT_D);
> } else if (IS_VALLEYVIEW(dev)) {
> /*
> * The DP_DETECTED bit is the latched state of the DDC
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 1e64a8c1e7cb..8adf500f3989 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -1031,14 +1031,13 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
> return ret;
> }
>
> -static void
> +static int
> intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
> {
> struct drm_device *dev = intel_dp_to_dev(intel_dp);
> struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> enum port port = intel_dig_port->port;
> const char *name = NULL;
> - int ret;
>
> switch (port) {
> case PORT_A:
> @@ -1080,20 +1079,7 @@ intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
> DRM_DEBUG_KMS("registering %s bus for %s\n", name,
> connector->base.kdev->kobj.name);
>
> - ret = drm_dp_aux_register(&intel_dp->aux);
> - if (ret < 0) {
> - DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
> - name, ret);
> - return;
> - }
> -
> - ret = sysfs_create_link(&connector->base.kdev->kobj,
> - &intel_dp->aux.ddc.dev.kobj,
> - intel_dp->aux.ddc.dev.kobj.name);
> - if (ret < 0) {
> - DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret);
> - drm_dp_aux_unregister(&intel_dp->aux);
> - }
> + return drm_dp_aux_register(&intel_dp->aux);
> }
>
> static void
> @@ -5019,6 +5005,10 @@ bool intel_dp_is_edp(struct drm_device *dev, enum port port)
> [PORT_D] = PORT_IDPD,
> };
>
> + /* eDP only on port B and/or C on vlv/chv */
> + if (IS_VALLEYVIEW(dev_priv) && !(port == PORT_B || port == PORT_C))
> + return false;
> +
> if (port == PORT_A)
> return true;
>
> @@ -5670,9 +5660,6 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> struct edid *edid;
> enum pipe pipe = INVALID_PIPE;
>
> - if (!is_edp(intel_dp))
> - return true;
> -
> pps_lock(intel_dp);
> intel_edp_panel_vdd_sanitize(intel_dp);
> pps_unlock(intel_dp);
> @@ -5762,7 +5749,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> return true;
> }
>
> -bool
> +int
> intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> struct intel_connector *intel_connector)
> {
> @@ -5772,6 +5759,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> struct drm_device *dev = intel_encoder->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> enum port port = intel_dig_port->port;
> + int ret;
> int type;
>
> intel_dp->pps_pipe = INVALID_PIPE;
> @@ -5802,34 +5790,14 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> else
> type = DRM_MODE_CONNECTOR_DisplayPort;
>
> - /*
> - * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
> - * for DP the encoder type can be set by the caller to
> - * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
> - */
> - if (type == DRM_MODE_CONNECTOR_eDP)
> - intel_encoder->type = INTEL_OUTPUT_EDP;
> -
> - /* eDP only on port B and/or C on vlv/chv */
> - if (WARN_ON(IS_VALLEYVIEW(dev) && is_edp(intel_dp) &&
> - port != PORT_B && port != PORT_C))
> - return false;
> -
> DRM_DEBUG_KMS("Adding %s connector on port %c\n",
> type == DRM_MODE_CONNECTOR_eDP ? "eDP" : "DP",
> port_name(port));
>
> - drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
> - drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
> -
> connector->interlace_allowed = true;
> connector->doublescan_allowed = 0;
>
> - INIT_DELAYED_WORK(&intel_dp->panel_vdd_work,
> - edp_panel_vdd_work);
> -
> - intel_connector_attach_encoder(intel_connector, intel_encoder);
> - drm_connector_register(connector);
> + INIT_DELAYED_WORK(&intel_dp->panel_vdd_work, edp_panel_vdd_work);
>
> if (HAS_DDI(dev))
> intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
> @@ -5855,7 +5823,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> BUG();
> }
>
> - if (is_edp(intel_dp)) {
> + if (type == DRM_MODE_CONNECTOR_eDP) {
> pps_lock(intel_dp);
> intel_dp_init_panel_power_timestamps(intel_dp);
> if (IS_VALLEYVIEW(dev))
> @@ -5865,7 +5833,49 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> pps_unlock(intel_dp);
> }
>
> - intel_dp_aux_init(intel_dp, intel_connector);
> + ret = intel_dp_aux_init(intel_dp, intel_connector);
> + if (ret < 0) {
> + DRM_ERROR("registering DP-AUX channel for %s failed (%d)\n",
> + intel_dp->aux.name, ret);
> + return 0;
> + }
> +
> + if (type == DRM_MODE_CONNECTOR_eDP &&
> + !intel_edp_init_connector(intel_dp, intel_connector)) {
> + drm_dp_aux_unregister(&intel_dp->aux);
> + cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
> + /*
> + * vdd might still be enabled do to the delayed vdd off.
> + * Make sure vdd is actually turned off here.
> + */
> + pps_lock(intel_dp);
> + edp_panel_vdd_off_sync(intel_dp);
> + pps_unlock(intel_dp);
> +
> + /* Downgrade to a normal DP link */
> + type = DRM_MODE_CONNECTOR_DisplayPort;
> + }
> +
> + /*
> + * For eDP we always set the encoder type to INTEL_OUTPUT_EDP, but
> + * for DP the encoder type can be set by the caller to
> + * INTEL_OUTPUT_UNKNOWN for DDI, so don't rewrite it.
> + */
> + if (type == DRM_MODE_CONNECTOR_eDP)
> + intel_encoder->type = INTEL_OUTPUT_EDP;
> +
> + drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
> + drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
> +
> + intel_connector_attach_encoder(intel_connector, intel_encoder);
> + drm_connector_register(connector);
> +
> + ret = sysfs_create_link(&connector->kdev->kobj,
> + &intel_dp->aux.ddc.dev.kobj,
> + intel_dp->aux.ddc.dev.kobj.name);
> + if (ret < 0)
> + DRM_ERROR("sysfs_create_link() for %s failed (%d)\n",
> + intel_dp->aux.name, ret);
>
> /* init MST on ports that can support it */
> if (HAS_DP_MST(dev) &&
> @@ -5873,23 +5883,6 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> intel_dp_mst_encoder_init(intel_dig_port,
> intel_connector->base.base.id);
>
> - if (!intel_edp_init_connector(intel_dp, intel_connector)) {
> - drm_dp_aux_unregister(&intel_dp->aux);
> - if (is_edp(intel_dp)) {
> - cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
> - /*
> - * vdd might still be enabled do to the delayed vdd off.
> - * Make sure vdd is actually turned off here.
> - */
> - pps_lock(intel_dp);
> - edp_panel_vdd_off_sync(intel_dp);
> - pps_unlock(intel_dp);
> - }
> - drm_connector_unregister(connector);
> - drm_connector_cleanup(connector);
> - return false;
> - }
> -
> intel_dp_add_properties(intel_dp, connector);
>
> /* For G4X desktop chip, PEG_BAND_GAP_DATA 3:0 must first be written
> @@ -5903,10 +5896,10 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
>
> i915_debugfs_connector_add(connector);
>
> - return true;
> + return type;
> }
>
> -void
> +int
> intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> @@ -5914,15 +5907,16 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
> struct intel_encoder *intel_encoder;
> struct drm_encoder *encoder;
> struct intel_connector *intel_connector;
> + int ret;
>
> intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL);
> if (!intel_dig_port)
> - return;
> + return 0;
>
> intel_connector = intel_connector_alloc();
> if (!intel_connector) {
> kfree(intel_dig_port);
> - return;
> + return 0;
> }
>
> intel_encoder = &intel_dig_port->base;
> @@ -5970,11 +5964,14 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
> intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
> dev_priv->hotplug.irq_port[port] = intel_dig_port;
>
> - if (!intel_dp_init_connector(intel_dig_port, intel_connector)) {
> + ret = intel_dp_init_connector(intel_dig_port, intel_connector);
> + if (ret == 0) {
> drm_encoder_cleanup(encoder);
> kfree(intel_dig_port);
> kfree(intel_connector);
> }
> +
> + return ret;
> }
>
> void intel_dp_mst_suspend(struct drm_device *dev)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 18fe6d8b7d93..ade1ce853583 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -1179,9 +1179,9 @@ void intel_csr_ucode_fini(struct drm_device *dev);
> void assert_csr_loaded(struct drm_i915_private *dev_priv);
>
> /* intel_dp.c */
> -void intel_dp_init(struct drm_device *dev, int output_reg, enum port port);
> -bool intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> - struct intel_connector *intel_connector);
> +int intel_dp_init(struct drm_device *dev, int output_reg, enum port port);
> +int intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
> + struct intel_connector *intel_connector);
> void intel_dp_start_link_train(struct intel_dp *intel_dp);
> void intel_dp_complete_link_train(struct intel_dp *intel_dp);
> void intel_dp_stop_link_train(struct intel_dp *intel_dp);
> --
> 2.5.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-08-09 14:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-09 12:12 [PATCH] drm/i915: Retry port as HDMI if dp_is_edp turns out to be false Chris Wilson
2015-08-09 14:09 ` Lukas Wunner [this message]
2015-08-10 2:30 ` Lin, Mengdong
2015-08-10 6:05 ` Sivakumar Thulasimani
2015-08-10 10:35 ` Sivakumar Thulasimani
2015-08-10 10:44 ` Chris Wilson
2015-08-12 13:45 ` Ville Syrjälä
2015-08-12 14:14 ` Chris Wilson
2015-08-12 14:28 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150809140923.GA4871@wunner.de \
--to=lukas@wunner.de \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.