Re: [PATCHv2 6/8] serial: imx: add runtime pm support

[Eduardo Valentin <edubezval@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1616 bytes --]

On Tue, Aug 11, 2015 at 12:02:58AM -0300, Fabio Estevam wrote:
> On Mon, Aug 10, 2015 at 10:35 PM, Eduardo Valentin <edubezval@gmail.com> wrote:
> 
> >  static int imx_poll_get_char(struct uart_port *port)
> >  {
> > -       if (!(readl_relaxed(port->membase + USR2) & USR2_RDR))
> > -               return NO_POLL_CHAR;
> > +       int ret;
> > +
> > +       pm_runtime_get_sync(sport->dev);
> > +       if (!(readl_relaxed(port->membase + USR2) & USR2_RDR)) {
> > +               ret = NO_POLL_CHAR;
> > +               goto mark_last;
> > +       }
> >
> > -       return readl_relaxed(port->membase + URXD0) & URXD_RX_DATA;
> > +       ret = readl_relaxed(port->membase + URXD0) & URXD_RX_DATA;
> > +
> > +mark_last:
> > +       pm_runtime_mark_last_busy(sport->dev);
> > +       pm_runtime_put_autosuspend(sport->dev);
> 
> You should return ret here.
> 
> > +static int serial_imx_runtime_resume(struct device *dev)
> > +{
> > +       struct imx_port *sport = dev_get_drvdata(dev);
> > +
> > +       clk_enable(sport->clk_per);
> 
> clk_enable() may fail.
> 
> > +       clk_enable(sport->clk_ipg);
> 
> Same here.
> 
> > @@ -2096,6 +2212,8 @@ static int imx_serial_port_resume(struct device *dev)
> >         struct platform_device *pdev = to_platform_device(dev);
> >         struct imx_port *sport = platform_get_drvdata(pdev);
> >
> > +       clk_prepare_enable(sport->clk_per);
> 
> clk_prepare_enable() may fail.
> 
> > +       clk_prepare_enable(sport->clk_ipg);
> 
> Ditto.


agreed on all. resending this one with the above suggestions/fixes applied.

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]