From mboxrd@z Thu Jan 1 00:00:00 1970 From: marex@denx.de (Marek Vasut) Date: Tue, 11 Aug 2015 18:54:30 +0200 Subject: [PATCH V5 0/3] nvmem: add ocotp support for i.MX23 and i.MX28 In-Reply-To: <1439299818-8495-1-git-send-email-stefan.wahren@i2se.com> References: <1439299818-8495-1-git-send-email-stefan.wahren@i2se.com> Message-ID: <201508111854.30933.marex@denx.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tuesday, August 11, 2015 at 03:30:15 PM, Stefan Wahren wrote: > This patch series brings read-only support for the On-Chip OTP cells > in the i.MX23 and i.MX28 processor. > > changes in V5: > - rebase to char-misc-next > - add nvmem prefix to module name > - set status in dtsi files > > changes in V4: > - rename fsl_ocotp.c to mxs-ocotp.c > - adapt driver to use NVMEM framework V7 > - take care of hbus clock > - increase too small timeout > - implement a wait function > - use defines from stmp_device.h > - remove owner init > - more code cleanup > > changes in V3: > - drop write support > - take care of i.MX23 which has less registers > - drop unnecessary header file > - move static variables into driver data > - add devicetree probing > - fix missing bank closing in error case > - use kobj from platform device for sysfs > - add SYSFS to Kconfig > - add binding file > - code cleanup > > Stefan Wahren (3): > DT: nvmem: add binding for mxs-ocotp > nvmem: add driver for ocotp in i.MX23 and i.MX28 > ARM: mxs: enable ocotp for i.MX23 and i.MX28 > > .../devicetree/bindings/nvmem/mxs-ocotp.txt | 24 ++ > arch/arm/boot/dts/imx23.dtsi | 7 +- > arch/arm/boot/dts/imx28.dtsi | 7 +- > drivers/nvmem/Kconfig | 11 + > drivers/nvmem/Makefile | 2 + > drivers/nvmem/mxs-ocotp.c | 252 > ++++++++++++++++++++ 6 files changed, 299 insertions(+), 4 deletions(-) > create mode 100644 Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt > create mode 100644 drivers/nvmem/mxs-ocotp.c Very nice, other than the comments from Srinivas, you can add my Reviewed-by: Marek Vasut Best regards, Marek Vasut From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Subject: Re: [PATCH V5 0/3] nvmem: add ocotp support for i.MX23 and i.MX28 Date: Tue, 11 Aug 2015 18:54:30 +0200 Message-ID: <201508111854.30933.marex@denx.de> References: <1439299818-8495-1-git-send-email-stefan.wahren@i2se.com> Mime-Version: 1.0 Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1439299818-8495-1-git-send-email-stefan.wahren-eS4NqCHxEME@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Stefan Wahren Cc: Greg Kroah-Hartman , Srinivas Kandagatla , Maxime Ripard , Shawn Guo , Mark Rutland , Pawel Moll , Ian Campbell , Rob Herring , Janusz =?utf-8?q?U=C5=BCycki?= , Fabio Estevam , p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org List-Id: devicetree@vger.kernel.org On Tuesday, August 11, 2015 at 03:30:15 PM, Stefan Wahren wrote: > This patch series brings read-only support for the On-Chip OTP cells > in the i.MX23 and i.MX28 processor. > > changes in V5: > - rebase to char-misc-next > - add nvmem prefix to module name > - set status in dtsi files > > changes in V4: > - rename fsl_ocotp.c to mxs-ocotp.c > - adapt driver to use NVMEM framework V7 > - take care of hbus clock > - increase too small timeout > - implement a wait function > - use defines from stmp_device.h > - remove owner init > - more code cleanup > > changes in V3: > - drop write support > - take care of i.MX23 which has less registers > - drop unnecessary header file > - move static variables into driver data > - add devicetree probing > - fix missing bank closing in error case > - use kobj from platform device for sysfs > - add SYSFS to Kconfig > - add binding file > - code cleanup > > Stefan Wahren (3): > DT: nvmem: add binding for mxs-ocotp > nvmem: add driver for ocotp in i.MX23 and i.MX28 > ARM: mxs: enable ocotp for i.MX23 and i.MX28 > > .../devicetree/bindings/nvmem/mxs-ocotp.txt | 24 ++ > arch/arm/boot/dts/imx23.dtsi | 7 +- > arch/arm/boot/dts/imx28.dtsi | 7 +- > drivers/nvmem/Kconfig | 11 + > drivers/nvmem/Makefile | 2 + > drivers/nvmem/mxs-ocotp.c | 252 > ++++++++++++++++++++ 6 files changed, 299 insertions(+), 4 deletions(-) > create mode 100644 Documentation/devicetree/bindings/nvmem/mxs-ocotp.txt > create mode 100644 drivers/nvmem/mxs-ocotp.c Very nice, other than the comments from Srinivas, you can add my Reviewed-by: Marek Vasut Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html