Re: [net-next PATCH 1/3] net: make default tx_queue_len configurable

[Phil Sutter <phil@nwl.cc>]

On Thu, Aug 13, 2015 at 03:10:33PM +0200, Jesper Dangaard Brouer wrote:
> 
> On Thu, 13 Aug 2015 03:13:40 +0200 Phil Sutter <phil@nwl.cc> wrote:
> 
> > On Tue, Aug 11, 2015 at 06:13:49PM -0700, Alexei Starovoitov wrote:
> 
> > > In general 'changing the default' may be an acceptable thing, but then
> > > it needs to strongly justified. How much performance does it bring?
> > 
> > A quick test on my local VM with veth and netperf (netserver and veth
> > peer in different netns) I see an increase of about 5% of throughput
> > when using noqueue instead of the default pfifo_fast.
> 
> Good that you can show 5% improvement with a single netperf flow.  We
> are saving approx 6 atomic operations avoiding the qdisc code path.
> 
> This fixes a scalability issue with veth. Thus, the real performance
> boost will happen with multiple flows and multiple CPU cores in
> action.  You can try with a multi core VM and use super_netperf.
> 
> https://github.com/borkmann/stuff/blob/master/super_netperf

I actually used that on my VM as well, but the difference between a
single and ten streams in parallel was negligible. In order to avoid
tampering the results, I tested again on a physical system with four
cores, ran each benchmark ten times and built an average over the
results. This showed an increase in throughput of about 35% with a
single stream and about 10% with ten streams in parallel. Not sure
though why the improvement is bigger in the first case if there really
is a scalability problem as you say.

Cheers, Phil