From: Greg KH <gregkh@linuxfoundation.org>
To: Baolin Wang <baolin.wang@linaro.org>
Cc: balbi@ti.com, broonie@kernel.org, linus.walleij@linaro.org,
linux-kernel@vger.kernel.org, peter.chen@freescale.com,
sojka@merica.cz, stern@rowland.harvard.edu,
r.baldyga@samsung.com, yoshihiro.shimoda.uh@renesas.com,
linux-usb@vger.kernel.org,
device-mainlining@lists.linuxfoundation.org, sre@kernel.org,
dbaryshkov@gmail.com, dwmw2@infradead.org, sameo@linux.intel.com,
lee.jones@linaro.org, patches@opensource.wolfsonmicro.com,
linux-pm@vger.kernel.org
Subject: Re: [PATCH v2 2/3] gadget: Introduce the usb charger framework
Date: Fri, 14 Aug 2015 08:27:23 -0700 [thread overview]
Message-ID: <20150814152723.GA17892@kroah.com> (raw)
In-Reply-To: <0c41e21239f69c4e1aa89aba020c91edfc17c4e8.1439519413.git.baolin.wang@linaro.org>
On Fri, Aug 14, 2015 at 05:47:45PM +0800, Baolin Wang wrote:
> This patch introduces the usb charger driver based on usb gadget that
> makes an enhancement to a power driver. It works well in practice but
> that requires a system with suitable hardware.
>
> The basic conception of the usb charger is that, when one usb charger
> is added or removed by reporting from the usb gadget state change or
> the extcon device state change, the usb charger will report to power
> user to set the current limitation.
>
> The usb charger will register notifiees on the usb gadget or the extcon
> device to get notified the usb charger state.
>
> Power user will register a notifiee on the usb charger to get notified
> by status changes from the usb charger. It will report to power user
> to set the current limitation when detecting the usb charger is added
> or removed from extcon device state or usb gadget state.
>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> ---
> drivers/usb/gadget/Kconfig | 7 +
> drivers/usb/gadget/Makefile | 1 +
> drivers/usb/gadget/charger.c | 561 +++++++++++++++++++++++++++++++++++++++
> include/linux/usb/usb_charger.h | 145 ++++++++++
> 4 files changed, 714 insertions(+)
> create mode 100644 drivers/usb/gadget/charger.c
> create mode 100644 include/linux/usb/usb_charger.h
>
> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> index bcf83c0..3d2b959 100644
> --- a/drivers/usb/gadget/Kconfig
> +++ b/drivers/usb/gadget/Kconfig
> @@ -127,6 +127,13 @@ config USB_GADGET_STORAGE_NUM_BUFFERS
> a module parameter as well.
> If unsure, say 2.
>
> +config USB_CHARGER
> + bool "USB charger support"
> + help
> + The usb charger driver based on the usb gadget that makes an
> + enhancement to a power driver which can set the current limitation
> + when the usb charger is added or removed.
> +
> source "drivers/usb/gadget/udc/Kconfig"
>
> #
> diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
> index 598a67d..1e421c1 100644
> --- a/drivers/usb/gadget/Makefile
> +++ b/drivers/usb/gadget/Makefile
> @@ -10,3 +10,4 @@ libcomposite-y := usbstring.o config.o epautoconf.o
> libcomposite-y += composite.o functions.o configfs.o u_f.o
>
> obj-$(CONFIG_USB_GADGET) += udc/ function/ legacy/
> +obj-$(CONFIG_USB_CHARGER) += charger.o
> diff --git a/drivers/usb/gadget/charger.c b/drivers/usb/gadget/charger.c
> new file mode 100644
> index 0000000..f24f7b7
> --- /dev/null
> +++ b/drivers/usb/gadget/charger.c
> @@ -0,0 +1,561 @@
> +/*
> + * usb charger.c -- USB charger driver
I think your company also wants a copyright line here. Not that it
means anything at all, but some lawyers love cargo-cult text blobs.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
I have to ask, do you really mean "any later version"?
> + */
> +
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/extcon.h>
> +#include <linux/export.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/usb.h>
> +#include <linux/usb/ch9.h>
> +#include <linux/usb/gadget.h>
> +#include <linux/usb/usb_charger.h>
> +
> +#define DEFAULT_CUR_PROTECT (50)
> +#define DEFAULT_SDP_CUR_LIMIT (500 - DEFAULT_CUR_PROTECT)
> +#define DEFAULT_DCP_CUR_LIMIT (1500 - DEFAULT_CUR_PROTECT)
> +#define DEFAULT_CDP_CUR_LIMIT (1500 - DEFAULT_CUR_PROTECT)
> +#define DEFAULT_ACA_CUR_LIMIT (1500 - DEFAULT_CUR_PROTECT)
> +
> +static DEFINE_IDA(usb_charger_ida);
> +static struct bus_type usb_charger_subsys = {
> + .name = "usb-charger",
> + .dev_name = "usb-charger",
> +};
> +
> +static struct usb_charger *dev_to_uchger(struct device *udev)
> +{
> + return container_of(udev, struct usb_charger, dev);
> +}
> +
> +static ssize_t usb_charger_cur_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct usb_charger *uchger = dev_to_uchger(dev);
> +
> + return scnprintf(buf, PAGE_SIZE, "%d %d %d %d\n",
> + uchger->cur_limit.sdp_cur_limit,
> + uchger->cur_limit.dcp_cur_limit,
> + uchger->cur_limit.cdp_cur_limit,
> + uchger->cur_limit.aca_cur_limit);
> +}
> +
> +static ssize_t usb_charger_cur_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct usb_charger *uchger = dev_to_uchger(dev);
> + struct usb_charger_cur_limit cur;
> + int ret;
> +
> + ret = sscanf(buf, "%d %d %d %d",
> + &cur.sdp_cur_limit, &cur.dcp_cur_limit,
> + &cur.cdp_cur_limit, &cur.aca_cur_limit);
> + if (ret == 0)
> + return -EINVAL;
> +
> + ret = usb_charger_set_cur_limit(uchger, &cur);
> + if (ret < 0)
> + return ret;
> +
> + return count;
> +}
> +static DEVICE_ATTR(cur_limit, 0644, usb_charger_cur_show, usb_charger_cur_store);
DEVICE_ATTR_RW()?
> +
> +static struct attribute *uchger_attributes[] = {
> + &dev_attr_cur_limit.attr,
> + NULL
> +};
> +
> +static const struct attribute_group uchger_attr_group = {
> + .attrs = uchger_attributes,
> +};
ATTRIBUTE_GROUPS()?
> +
> +/*
> + * usb_charger_find_by_name - Get the usb charger device by name.
> + * @name - usb charger device name.
> + *
> + * return the instance of usb charger device, the device must be
> + * released with usb_charger_put().
> + */
> +struct usb_charger *usb_charger_find_by_name(const char *name)
> +{
> + struct device *udev;
> +
> + if (!name)
> + return ERR_PTR(-EINVAL);
> +
> + udev = bus_find_device_by_name(&usb_charger_subsys, NULL, name);
> + if (!udev)
> + return ERR_PTR(-ENODEV);
> +
> + return dev_to_uchger(udev);
> +}
> +
> +/*
> + * usb_charger_get() - Reference a usb charger.
> + * @uchger - usb charger
> + */
> +struct usb_charger *usb_charger_get(struct usb_charger *uchger)
> +{
> + return (uchger && get_device(&uchger->dev)) ? uchger : NULL;
> +}
> +
> +/*
> + * usb_charger_put() - Dereference a usb charger.
> + * @uchger - charger to release
> + */
> +void usb_charger_put(struct usb_charger *uchger)
> +{
> + if (uchger)
> + put_device(&uchger->dev);
> +}
> +
> +/*
> + * usb_charger_register_notify() - Register a notifiee to get notified by
> + * any attach status changes from the usb charger detection.
> + * @uchger - the usb charger device which is monitored.
> + * @nb - a notifier block to be registered.
> + */
> +int usb_charger_register_notify(struct usb_charger *uchger,
> + struct notifier_block *nb)
> +{
> + int ret;
> +
> + if (!uchger || !nb)
> + return -EINVAL;
> +
> + mutex_lock(&uchger->lock);
> + ret = raw_notifier_chain_register(&uchger->uchger_nh, nb);
> +
> + /* Generate an initial notify so users start in the right state */
> + if (!ret) {
> + usb_charger_detect_type(uchger);
> + raw_notifier_call_chain(&uchger->uchger_nh,
> + usb_charger_get_cur_limit(uchger),
> + uchger);
> + }
> + mutex_unlock(&uchger->lock);
> +
> + return ret;
> +}
> +
> +/*
> + * usb_charger_unregister_notify() - Unregister a notifiee from the usb charger.
> + * @uchger - the usb charger device which is monitored.
> + * @nb - a notifier block to be unregistered.
> + */
> +int usb_charger_unregister_notify(struct usb_charger *uchger,
> + struct notifier_block *nb)
> +{
> + int ret;
> +
> + if (!uchger || !nb)
> + return -EINVAL;
> +
> + mutex_lock(&uchger->lock);
> + ret = raw_notifier_chain_unregister(&uchger->uchger_nh, nb);
> + mutex_unlock(&uchger->lock);
> +
> + return ret;
> +}
> +
> +/*
> + * usb_charger_detect_type() - Get the usb charger type by the callback
> + * which is implemented by gadget operations.
> + * @uchger - the usb charger device.
> + *
> + * return the usb charger type.
> + */
> +enum usb_charger_type
> +usb_charger_detect_type(struct usb_charger *uchger)
> +{
> + if (uchger->gadget && uchger->gadget->ops
> + && uchger->gadget->ops->get_charger_type)
> + uchger->type =
> + uchger->gadget->ops->get_charger_type(uchger->gadget);
> + else
> + uchger->type = UNKNOWN_TYPE;
> +
> + return uchger->type;
> +}
> +
> +/*
> + * usb_charger_set_cur_limit() - Set the current limitation.
> + * @uchger - the usb charger device.
> + * @cur_limit_set - the current limitation.
> + */
> +int usb_charger_set_cur_limit(struct usb_charger *uchger,
> + struct usb_charger_cur_limit *cur_limit_set)
> +{
> + if (!uchger || !cur_limit_set)
> + return -EINVAL;
> +
> + uchger->cur_limit.sdp_cur_limit = cur_limit_set->sdp_cur_limit;
> + uchger->cur_limit.dcp_cur_limit = cur_limit_set->dcp_cur_limit;
> + uchger->cur_limit.cdp_cur_limit = cur_limit_set->cdp_cur_limit;
> + uchger->cur_limit.aca_cur_limit = cur_limit_set->aca_cur_limit;
> + return 0;
> +}
> +
> +/*
> + * usb_charger_get_cur_limit() - Get the current limitation by
> + * different usb charger type.
> + * @uchger - the usb charger device.
> + *
> + * return the current limitation to set.
> + */
> +unsigned int
> +usb_charger_get_cur_limit(struct usb_charger *uchger)
> +{
> + enum usb_charger_type uchger_type = uchger->type;
> + unsigned int cur_limit;
> +
> + switch (uchger_type) {
> + case SDP_TYPE:
> + cur_limit = uchger->cur_limit.sdp_cur_limit;
> + break;
> + case DCP_TYPE:
> + cur_limit = uchger->cur_limit.dcp_cur_limit;
> + break;
> + case CDP_TYPE:
> + cur_limit = uchger->cur_limit.cdp_cur_limit;
> + break;
> + case ACA_TYPE:
> + cur_limit = uchger->cur_limit.aca_cur_limit;
> + break;
> + default:
> + return 0;
> + }
> +
> + return cur_limit;
> +}
> +
> +/*
> + * usb_charger_notifier_others() - It will notify other device registered
> + * on usb charger when the usb charger state is changed.
> + * @uchger - the usb charger device.
> + * @state - the state of the usb charger.
> + */
> +static void
> +usb_charger_notify_others(struct usb_charger *uchger,
> + enum usb_charger_state state)
> +{
> + mutex_lock(&uchger->lock);
> + uchger->state = state;
> +
> + switch (state) {
> + case USB_CHARGER_PRESENT:
> + usb_charger_detect_type(uchger);
> + raw_notifier_call_chain(&uchger->uchger_nh,
> + usb_charger_get_cur_limit(uchger),
> + uchger);
> + break;
> + case USB_CHARGER_REMOVE:
> + uchger->type = UNKNOWN_TYPE;
> + raw_notifier_call_chain(&uchger->uchger_nh, 0, uchger);
> + break;
> + default:
> + dev_warn(&uchger->dev, "Unknown USB charger state: %d\n",
> + state);
> + break;
> + }
> + mutex_unlock(&uchger->lock);
> +}
> +
> +/*
> + * usb_charger_plug_by_extcon() - The notifier call function which is registered
> + * on the extcon device.
> + * @nb - the notifier block that notified by extcon device.
> + * @state - the extcon device state.
> + * @data - here specify a extcon device.
> + *
> + * return the notify flag.
> + */
> +static int
> +usb_charger_plug_by_extcon(struct notifier_block *nb,
> + unsigned long state, void *data)
> +{
> + struct usb_charger_nb *extcon_nb =
> + container_of(nb, struct usb_charger_nb, nb);
> + struct usb_charger *uchger = extcon_nb->uchger;
> + enum usb_charger_state uchger_state;
> +
> + if (!uchger)
> + return NOTIFY_BAD;
> +
> + /* Report event to power to setting the current limitation
> + * for this usb charger when one usb charger is added or removed
> + * with detecting by extcon device.
> + */
> + if (state)
> + uchger_state = USB_CHARGER_PRESENT;
> + else
> + uchger_state = USB_CHARGER_REMOVE;
> +
> + usb_charger_notify_others(uchger, uchger_state);
> +
> + return NOTIFY_OK;
> +}
> +
> +/*
> + * usb_charger_plug_by_gadget() - Set the usb charger current limitation
> + * according to the usb gadget device state.
> + * @nb - the notifier block that notified by usb gadget device.
> + * @state - the usb gadget state.
> + * @data - here specify a usb gadget device.
> + */
> +static int
> +usb_charger_plug_by_gadget(struct notifier_block *nb,
> + unsigned long state, void *data)
> +{
> + struct usb_gadget *gadget = (struct usb_gadget *)data;
> + struct usb_charger *uchger = gadget->uchger;
> + enum usb_charger_state uchger_state;
> +
> + if (!uchger)
> + return NOTIFY_BAD;
> +
> + /* Report event to power to setting the current limitation
> + * for this usb charger when one usb charger state is changed
> + * with detecting by usb gadget state.
> + */
> + if (uchger->old_gadget_state != state) {
> + uchger->old_gadget_state = state;
> +
> + if (state >= USB_STATE_ATTACHED)
> + uchger_state = USB_CHARGER_PRESENT;
> + else if (state == USB_STATE_NOTATTACHED)
> + uchger_state = USB_CHARGER_REMOVE;
> + else
> + uchger_state = USB_CHARGER_DEFAULT;
> +
> + usb_charger_notify_others(uchger, uchger_state);
> + }
> +
> + return NOTIFY_OK;
> +}
> +
> +static int devm_uchger_dev_match(struct device *dev, void *res, void *data)
> +{
> + struct usb_charger **r = res;
> +
> + if (WARN_ON(!r || !*r))
> + return 0;
> +
> + return *r == data;
> +}
> +
> +static void usb_charger_release(struct device *dev)
> +{
> + struct usb_charger *uchger = dev_get_drvdata(dev);
> +
> + kfree(uchger->name);
> + kfree(uchger);
> +}
> +
> +/*
> + * usb_charger_unregister() - Unregister a usb charger device.
> + * @uchger - the usb charger to be unregistered.
> + */
> +static int usb_charger_unregister(struct usb_charger *uchger)
> +{
> + if (!uchger)
> + return -EINVAL;
> +
> + sysfs_remove_group(&uchger->dev.kobj, &uchger_attr_group);
> + device_unregister(&uchger->dev);
> +
> + return 0;
> +}
> +
> +static void devm_uchger_dev_unreg(struct device *dev, void *res)
> +{
> + usb_charger_unregister(*(struct usb_charger **)res);
> +}
> +
> +void devm_usb_charger_unregister(struct device *dev,
> + struct usb_charger *uchger)
> +{
> + devres_release(dev, devm_uchger_dev_unreg,
> + devm_uchger_dev_match, uchger);
> +}
> +
> +/*
> + * usb_charger_register() - Register a new usb charger device
> + * which is created by the usb charger framework.
> + * @uchger - the new usb charger device.
> + */
> +static int usb_charger_register(struct device *dev, struct usb_charger *uchger)
> +{
> + int ret;
> +
> + if (!uchger) {
> + dev_err(dev, "no device provided for charger\n");
> + return -EINVAL;
> + }
> +
> + uchger->dev.parent = dev;
> + uchger->dev.release = usb_charger_release;
> + uchger->dev.bus = &usb_charger_subsys;
> +
> + ret = ida_simple_get(&usb_charger_ida, 0, 0, GFP_KERNEL);
> + if (ret < 0) {
> + dev_err(dev, "get usb charger id failed\n");
> + return ret;
> + }
> +
> + uchger->id = ret;
> + dev_set_name(&uchger->dev, "usb-charger.%d", uchger->id);
> + dev_set_drvdata(&uchger->dev, uchger);
> +
> + ret = device_register(&uchger->dev);
> + if (ret)
> + goto fail_register;
> +
> + ret = sysfs_create_group(&uchger->dev.kobj, &uchger_attr_group);
And you just raced with userspace, and lost :(
Assign the group to the device _before_ you tell userspace about it.
The big hint here that is wrong is that you have to call a sysfs_*
function for a struct device. There is no device_create_group() call
for a reason.
> + if (ret)
> + goto fail_create_files;
> +
> + return 0;
> +
> +fail_create_files:
> + device_unregister(&uchger->dev);
> +fail_register:
> + put_device(&uchger->dev);
> + ida_simple_remove(&usb_charger_ida, uchger->id);
> + uchger->id = -1;
> + dev_err(dev, "Failed to register usb charger (%s)\n",
> + uchger->name);
> + return ret;
> +}
> +
> +int devm_usb_charger_register(struct device *dev,
> + struct usb_charger *uchger)
> +{
> + struct usb_charger **ptr;
> + int ret;
> +
> + ptr = devres_alloc(devm_uchger_dev_unreg, sizeof(*ptr), GFP_KERNEL);
> + if (!ptr)
> + return -ENOMEM;
> +
> + ret = usb_charger_register(dev, uchger);
> + if (ret) {
> + devres_free(ptr);
> + return ret;
> + }
> +
> + *ptr = uchger;
> + devres_add(dev, ptr);
> +
> + return 0;
> +}
> +
> +int usb_charger_init(struct usb_gadget *ugadget)
> +{
> + struct usb_charger *uchger;
> + struct extcon_dev *edev;
> + char buf[100];
That's a lot of stack, why?
> + char *str;
> + int ret;
> +
> + if (!ugadget)
> + return -EINVAL;
> +
> + uchger = devm_kzalloc(&ugadget->dev, sizeof(struct usb_charger),
> + GFP_KERNEL);
No, you are creating a new struct device, you can't assign its resources
to another struct device, that breaks all of the lifetime rules.
kzalloc() only please.
> + if (!uchger)
> + return -ENOMEM;
> +
> + sprintf(buf, "usb-charger.%s", ugadget->name);
> + str = devm_kzalloc(&ugadget->dev, sizeof(char) * (strlen(buf) + 1),
> + GFP_KERNEL);
Why have a string when you already have a name for the device, in the
device itself? What is this all for?
> + if (!str)
> + return -ENOMEM;
> +
> + strcpy(str, buf);
> + uchger->name = str;
> + uchger->type = UNKNOWN_TYPE;
> + uchger->state = USB_CHARGER_DEFAULT;
> + uchger->id = -1;
> + uchger->cur_limit.sdp_cur_limit = DEFAULT_SDP_CUR_LIMIT;
> + uchger->cur_limit.dcp_cur_limit = DEFAULT_DCP_CUR_LIMIT;
> + uchger->cur_limit.cdp_cur_limit = DEFAULT_CDP_CUR_LIMIT;
> + uchger->cur_limit.aca_cur_limit = DEFAULT_ACA_CUR_LIMIT;
> +
> + mutex_init(&uchger->lock);
> + INIT_LIST_HEAD(&uchger->entry);
> + RAW_INIT_NOTIFIER_HEAD(&uchger->uchger_nh);
> +
> + /* register a notifier on a extcon device if it is exsited */
> + edev = extcon_get_edev_by_phandle(ugadget->dev.parent, 0);
> + if (!IS_ERR_OR_NULL(edev)) {
> + uchger->extcon_dev = edev;
> + uchger->extcon_nb.nb.notifier_call = usb_charger_plug_by_extcon;
> + uchger->extcon_nb.uchger = uchger;
> + extcon_register_notifier(edev, EXTCON_USB, &uchger->extcon_nb.nb);
> + }
> +
> + /* register a notifier on a usb gadget device */
> + uchger->gadget = ugadget;
> + ugadget->uchger = uchger;
> + uchger->old_gadget_state = ugadget->state;
> + uchger->gadget_nb.notifier_call = usb_charger_plug_by_gadget;
> + usb_gadget_register_notify(ugadget, &uchger->gadget_nb);
> +
> + /* register a new usb charger */
> + ret = usb_charger_register(&ugadget->dev, uchger);
> + if (ret)
> + goto fail;
> +
> + return 0;
> +
> +fail:
> + if (uchger->extcon_dev)
> + extcon_unregister_notifier(uchger->extcon_dev,
> + EXTCON_USB, &uchger->extcon_nb.nb);
> +
> + usb_gadget_unregister_notify(uchger->gadget, &uchger->gadget_nb);
> + return ret;
> +}
> +
> +int usb_charger_exit(struct usb_gadget *ugadget)
> +{
> + struct usb_charger *uchger = ugadget->uchger;
> +
> + if (!uchger)
> + return -EINVAL;
> +
> + if (uchger->extcon_dev)
> + extcon_unregister_notifier(uchger->extcon_dev,
> + EXTCON_USB, &uchger->extcon_nb.nb);
> +
> + usb_gadget_unregister_notify(uchger->gadget, &uchger->gadget_nb);
> + ida_simple_remove(&usb_charger_ida, uchger->id);
> +
> + return usb_charger_unregister(uchger);
> +}
> +
> +static int __init usb_charger_sysfs_init(void)
> +{
> + return subsys_system_register(&usb_charger_subsys, NULL);
> +}
> +core_initcall(usb_charger_sysfs_init);
> +
> +MODULE_AUTHOR("Baolin Wang <baolin.wang@linaro.org>");
> +MODULE_DESCRIPTION("USB charger driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/usb/usb_charger.h b/include/linux/usb/usb_charger.h
> new file mode 100644
> index 0000000..8cbfaae
> --- /dev/null
> +++ b/include/linux/usb/usb_charger.h
> @@ -0,0 +1,145 @@
> +#ifndef __LINUX_USB_CHARGER_H__
> +#define __LINUX_USB_CHARGER_H__
> +
> +#include <linux/device.h>
> +#include <linux/notifier.h>
> +#include <linux/sysfs.h>
> +#include <linux/usb/ch9.h>
> +
> +/* USB charger type:
> + * SDP (Standard Downstream Port)
> + * DCP (Dedicated Charging Port)
> + * CDP (Charging Downstream Port)
> + * ACA (Accessory Charger Adapters)
> + */
> +enum usb_charger_type {
> + UNKNOWN_TYPE,
> + SDP_TYPE,
> + DCP_TYPE,
> + CDP_TYPE,
> + ACA_TYPE,
> +};
> +
> +/* USB charger state */
> +enum usb_charger_state {
> + USB_CHARGER_DEFAULT,
> + USB_CHARGER_PRESENT,
> + USB_CHARGER_REMOVE,
> +};
> +
> +/* Current limitation by charger type */
> +struct usb_charger_cur_limit {
> + unsigned int sdp_cur_limit;
> + unsigned int dcp_cur_limit;
> + unsigned int cdp_cur_limit;
> + unsigned int aca_cur_limit;
> +};
> +
> +struct usb_charger_nb {
> + struct notifier_block nb;
> + struct usb_charger *uchger;
> +};
> +
> +struct usb_charger {
> + /* Internal data. Please do not set. */
Heh, as if people read comments :(
> + const char *name;
This isn't needed, use the one in your struct device.
> + struct device dev;
> + struct raw_notifier_head uchger_nh;
> + struct list_head entry;
Why do you need another list? The device already is on a list.
> + struct mutex lock;
What is this protecting, document it.
thanks,
greg k-h
next prev parent reply other threads:[~2015-08-14 15:27 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-14 9:47 [PATCH v2 0/3] Introduce usb charger framework to deal with the usb gadget power negotation Baolin Wang
2015-08-14 9:47 ` [PATCH v2 1/3] gadget: Support for the usb charger framework Baolin Wang
[not found] ` <33e56f632418b8e42162d5b64decb6ffc8de3e01.1439519412.git.baolin.wang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-08-17 0:40 ` Peter Chen
2015-08-17 0:40 ` Peter Chen
2015-08-17 2:08 ` Baolin Wang
2015-08-14 9:47 ` [PATCH v2 2/3] gadget: Introduce " Baolin Wang
2015-08-14 15:27 ` Greg KH [this message]
2015-08-17 3:03 ` Baolin Wang
2015-08-17 15:25 ` [Device-mainlining] " Tim Bird
[not found] ` <55D1FCDF.6060709-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
2015-08-18 1:43 ` Baolin Wang
2015-08-18 1:43 ` Baolin Wang
2015-10-08 15:50 ` Pavel Machek
2015-10-08 16:23 ` Greg KH
[not found] ` <20151008162316.GA5833-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org>
2015-10-08 17:04 ` Pavel Machek
2015-10-08 17:04 ` Pavel Machek
2015-10-08 17:16 ` Greg KH
2015-08-17 17:24 ` Mark Brown
2015-08-18 1:44 ` Baolin Wang
[not found] ` <cover.1439519412.git.baolin.wang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-08-14 8:55 ` [PATCH v2 0/3] Introduce usb charger framework to deal with the usb gadget power negotation Li Jun
2015-08-14 8:55 ` Li Jun
2015-08-14 11:04 ` Baolin Wang
[not found] ` <CAMz4kuK7f=rGOO-YdB0AB8PzpTbnWZtasuQK8gOXLuM9zyn3gw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-17 1:15 ` Li Jun
2015-08-17 1:15 ` Li Jun
2015-08-17 6:02 ` Baolin Wang
[not found] ` <CAMz4kuJGR1ZQPbBNpp7EABJn=Rag8jSrb-2ztcefUf4R7pk4AQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-17 8:20 ` Li Jun
2015-08-17 8:20 ` Li Jun
2015-08-17 11:51 ` Baolin Wang
2015-08-17 11:51 ` Baolin Wang
2015-08-14 9:47 ` [PATCH v2 3/3] power: wm831x_power: Support USB charger current limit management Baolin Wang
2015-08-14 9:47 ` Baolin Wang
2015-08-14 10:42 ` Lee Jones
2015-08-17 1:07 ` Peter Chen
2015-08-17 1:07 ` Peter Chen
2015-08-17 17:26 ` Mark Brown
[not found] ` <20150817172623.GO10748-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-08-17 23:58 ` Felipe Balbi
2015-08-17 23:58 ` Felipe Balbi
2015-08-18 5:04 ` Mark Brown
2015-08-18 14:07 ` Felipe Balbi
2015-08-18 14:07 ` Felipe Balbi
2015-08-18 5:20 ` Peter Chen
2015-08-18 5:20 ` Peter Chen
2015-08-18 16:12 ` Mark Brown
[not found] ` <20150818161200.GK10748-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-08-19 0:02 ` Peter Chen
2015-08-19 0:02 ` Peter Chen
2015-08-19 16:36 ` Mark Brown
[not found] ` <f3bfd04bc157e97e2d0632b7ed2452f366f66488.1439519413.git.baolin.wang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-08-20 9:02 ` David Laight
2015-08-20 9:02 ` David Laight
2015-08-21 2:28 ` Baolin Wang
2015-08-21 2:28 ` Baolin Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150814152723.GA17892@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=balbi@ti.com \
--cc=baolin.wang@linaro.org \
--cc=broonie@kernel.org \
--cc=dbaryshkov@gmail.com \
--cc=device-mainlining@lists.linuxfoundation.org \
--cc=dwmw2@infradead.org \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=peter.chen@freescale.com \
--cc=r.baldyga@samsung.com \
--cc=sameo@linux.intel.com \
--cc=sojka@merica.cz \
--cc=sre@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.