From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
alsa-devel@alsa-project.org, Mark Brown <broonie@kernel.org>,
Charles Keepax <ckeepax@opensource.wolfsonmicro.com>,
patches@opensource.wolfsonmicro.com, linux-input@vger.kernel.org
Subject: Re: [PATCH v2] ALSA: ac97: Switch to dev_pm_ops
Date: Fri, 21 Aug 2015 09:15:29 -0700 [thread overview]
Message-ID: <20150821161529.GB26302@localhost> (raw)
In-Reply-To: <s5hbne1ujxk.wl-tiwai@suse.de>
On Fri, Aug 21, 2015 at 10:25:59AM +0200, Takashi Iwai wrote:
> On Fri, 21 Aug 2015 09:48:33 +0200,
> Lars-Peter Clausen wrote:
> >
> > Convert the ac97_bus from legacy suspend/resume callbacks to dev_pm_ops.
> >
> > Since there isn't anything special to do at the bus level the bus driver
> > does not have to implement any callbacks. The device driver core will
> > automatically pick up and execute the device's PM ops.
> >
> > As there is only a single AC'97 driver implementing suspend and resume,
> > update both the core and driver at the same time to avoid unnecessary code
> > churn.
> >
> > While we are at it also drop the ifdefs around the suspend/resume functions
> > to increase compile test coverage.
> >
> > Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> > ---
> > This patch touches code in both ALSA and the input subsystem. Ideally this
> > patch will be merged via the ALSA tree. Given that the wm97xx touchscreen
> > driver is not seeing too many changes these days the risk of conflicts
> > should be low.
>
> If Dmitry is happy with this, I'll take this.
Sounds good to me.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Thanks!
>
>
> thanks,
>
> Takashi
>
> >
> > Changes since v1:
> > * Drop ifdefs around suspend/resum functions
> > ---
> > drivers/input/touchscreen/wm97xx-core.c | 13 ++++---------
> > sound/ac97_bus.c | 26 --------------------------
> > 2 files changed, 4 insertions(+), 35 deletions(-)
> >
> > diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
> > index b1ae779..1534e9b 100644
> > --- a/drivers/input/touchscreen/wm97xx-core.c
> > +++ b/drivers/input/touchscreen/wm97xx-core.c
> > @@ -732,8 +732,7 @@ static int wm97xx_remove(struct device *dev)
> > return 0;
> > }
> >
> > -#ifdef CONFIG_PM
> > -static int wm97xx_suspend(struct device *dev, pm_message_t state)
> > +static int __maybe_unused wm97xx_suspend(struct device *dev)
> > {
> > struct wm97xx *wm = dev_get_drvdata(dev);
> > u16 reg;
> > @@ -765,7 +764,7 @@ static int wm97xx_suspend(struct device *dev, pm_message_t state)
> > return 0;
> > }
> >
> > -static int wm97xx_resume(struct device *dev)
> > +static int __maybe_unused wm97xx_resume(struct device *dev)
> > {
> > struct wm97xx *wm = dev_get_drvdata(dev);
> >
> > @@ -799,10 +798,7 @@ static int wm97xx_resume(struct device *dev)
> > return 0;
> > }
> >
> > -#else
> > -#define wm97xx_suspend NULL
> > -#define wm97xx_resume NULL
> > -#endif
> > +static SIMPLE_DEV_PM_OPS(wm97xx_pm_ops, wm97xx_suspend, wm97xx_resume);
> >
> > /*
> > * Machine specific operations
> > @@ -836,8 +832,7 @@ static struct device_driver wm97xx_driver = {
> > .owner = THIS_MODULE,
> > .probe = wm97xx_probe,
> > .remove = wm97xx_remove,
> > - .suspend = wm97xx_suspend,
> > - .resume = wm97xx_resume,
> > + .pm = &wm97xx_pm_ops,
> > };
> >
> > static int __init wm97xx_init(void)
> > diff --git a/sound/ac97_bus.c b/sound/ac97_bus.c
> > index 2b50cbe..57a6dfc 100644
> > --- a/sound/ac97_bus.c
> > +++ b/sound/ac97_bus.c
> > @@ -27,35 +27,9 @@ static int ac97_bus_match(struct device *dev, struct device_driver *drv)
> > return 1;
> > }
> >
> > -#ifdef CONFIG_PM
> > -static int ac97_bus_suspend(struct device *dev, pm_message_t state)
> > -{
> > - int ret = 0;
> > -
> > - if (dev->driver && dev->driver->suspend)
> > - ret = dev->driver->suspend(dev, state);
> > -
> > - return ret;
> > -}
> > -
> > -static int ac97_bus_resume(struct device *dev)
> > -{
> > - int ret = 0;
> > -
> > - if (dev->driver && dev->driver->resume)
> > - ret = dev->driver->resume(dev);
> > -
> > - return ret;
> > -}
> > -#endif /* CONFIG_PM */
> > -
> > struct bus_type ac97_bus_type = {
> > .name = "ac97",
> > .match = ac97_bus_match,
> > -#ifdef CONFIG_PM
> > - .suspend = ac97_bus_suspend,
> > - .resume = ac97_bus_resume,
> > -#endif /* CONFIG_PM */
> > };
> >
> > static int __init ac97_bus_init(void)
> > --
> > 2.1.4
> >
> >
--
Dmitry
next prev parent reply other threads:[~2015-08-21 16:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-21 7:48 [PATCH v2] ALSA: ac97: Switch to dev_pm_ops Lars-Peter Clausen
2015-08-21 8:25 ` Takashi Iwai
2015-08-21 16:15 ` Dmitry Torokhov [this message]
2015-08-21 16:27 ` Takashi Iwai
2015-08-21 16:59 ` Mark Brown
2015-08-21 17:31 ` Takashi Iwai
2015-08-21 16:19 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150821161529.GB26302@localhost \
--to=dmitry.torokhov@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=lars@metafoo.de \
--cc=linux-input@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.