All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Intel Graphics Development <intel-gfx@lists.freedesktop.org>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>
Subject: Re: [PATCH v2] drm/atomic: Fix bookkeeping with TEST_ONLY, v2.
Date: Thu, 27 Aug 2015 15:48:58 +0300	[thread overview]
Message-ID: <20150827124858.GB5176@intel.com> (raw)
In-Reply-To: <55DF05F7.1010308@linux.intel.com>

On Thu, Aug 27, 2015 at 02:43:35PM +0200, Maarten Lankhorst wrote:
> Op 27-08-15 om 14:19 schreef Daniel Stone:
> > Hi,
> >
> > On 4 August 2015 at 12:34, Maarten Lankhorst
> > <maarten.lankhorst@linux.intel.com> wrote:
> >> Commit ec9f932ed41622d120de52a5b525e4d77b9ef17e
> >> "drm/atomic: Cleanup on error properly in the atomic ioctl."
> >> cleaned up some error paths, but didn't fix the TEST_ONLY path.
> >> In the check only case plane->fb shouldn't be updated, and
> >> the vblank events should be cleared as on failure.
> > Bikeshedding a bit ...
> >
> > An early test precludes TEST_ONLY | PAGE_FLIP_EVENT, so you don't need
> > to mention this in the commit message; in this case, the main change
> > is about plane->{,old_}fb.
> Even testing with PAGE_FLIP_EVENT would be useful because
> event && !crtc_state->active should not be allowed. In that case test
> could succeed but commit could fail.

Why would commit fail when the we're in DPMS off? I would suggest it
should be allowed. The operation would just a be a nop from a HW point
of view, all the calculation/checks would still be performed.

> 
> Though I guess you're right and it's currently not allowed.
> >> @@ -1532,7 +1533,7 @@ retry:
> >>                 ret = drm_atomic_check_only(state);
> >>                 /* _check_only() does not free state, unlike _commit() */
> >>                 if (!ret)
> >> -                       drm_atomic_state_free(state);
> >> +                       goto free;
> >>         } else if (arg->flags & DRM_MODE_ATOMIC_NONBLOCK) {
> >>                 ret = drm_atomic_async_commit(state);
> >>         } else {
> >> @@ -1566,6 +1567,7 @@ out:
> >>         }
> >>
> >>         if (ret) {
> >> +free:
> > This is a bit nasty. Can we please move the label above the
> > conditional and change the condition to (ret || flags & TEST_ONLY)?
> > Doing that, you could also move the label above the (ret == -EDEADLK)
> > check, which would cover ->atomic_check needing to grab other states
> > (global resources?) and failing.
> If our bookkeeping is correct then it won't be harmful to fixup old_fb.
> Cleaning up more old_fb for more planes than initially had fb updates can always
> happen anyway, because a modeset will add all affected planes.
> 
> How about the below patch? Apply with git am --scissors
> 
> -------->8------
> Commit ec9f932ed41622d120de52a5b525e4d77b9ef17e
> "drm/atomic: Cleanup on error properly in the atomic ioctl."
> cleaned up some error paths, but allowed -EDEADLK to
> leak vblank events.
> 
> Additionally check_only was updating plane->fb, which should
> not be done when checking a new configuration only.
> 
> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> ---
> diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
> index c2448f42480f..78ffb4965548 100644
> --- a/drivers/gpu/drm/drm_atomic.c
> +++ b/drivers/gpu/drm/drm_atomic.c
> @@ -1542,7 +1542,8 @@ retry:
>  			copied_props++;
>  		}
>  
> -		if (obj->type == DRM_MODE_OBJECT_PLANE && count_props) {
> +		if (obj->type == DRM_MODE_OBJECT_PLANE && count_props &&
> +		    !(arg->flags & DRM_MODE_ATOMIC_TEST_ONLY)) {
>  			plane = obj_to_plane(obj);
>  			plane_mask |= (1 << drm_plane_index(plane));
>  			plane->old_fb = plane->fb;
> @@ -1564,10 +1565,11 @@ retry:
>  	}
>  
>  	if (arg->flags & DRM_MODE_ATOMIC_TEST_ONLY) {
> +		/*
> +		 * Unlike commit, check_only does not clean up state.
> +		 * Below we call drm_atomic_state_free for it.
> +		 */
>  		ret = drm_atomic_check_only(state);
> -		/* _check_only() does not free state, unlike _commit() */
> -		if (!ret)
> -			drm_atomic_state_free(state);
>  	} else if (arg->flags & DRM_MODE_ATOMIC_NONBLOCK) {
>  		ret = drm_atomic_async_commit(state);
>  	} else {
> @@ -1594,25 +1596,24 @@ out:
>  		plane->old_fb = NULL;
>  	}
>  
> +	if (ret && arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
> +		for_each_crtc_in_state(state, crtc, crtc_state, i) {
> +			if (!crtc_state->event)
> +				continue;
> +
> +			destroy_vblank_event(dev, file_priv,
> +					     crtc_state->event);
> +		}
> +	}
> +
>  	if (ret == -EDEADLK) {
>  		drm_atomic_state_clear(state);
>  		drm_modeset_backoff(&ctx);
>  		goto retry;
>  	}
>  
> -	if (ret) {
> -		if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT) {
> -			for_each_crtc_in_state(state, crtc, crtc_state, i) {
> -				if (!crtc_state->event)
> -					continue;
> -
> -				destroy_vblank_event(dev, file_priv,
> -						     crtc_state->event);
> -			}
> -		}
> -
> +	if (ret || arg->flags & DRM_MODE_ATOMIC_TEST_ONLY)
>  		drm_atomic_state_free(state);
> -	}
>  
>  	drm_modeset_drop_locks(&ctx);
>  	drm_modeset_acquire_fini(&ctx);
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-08-27 12:48 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-04 11:34 [PATCH] drm/atomic: Fix bookkeeping with TEST_ONLY Maarten Lankhorst
2015-08-11 10:03 ` shuang.he
2015-08-27 12:19 ` Daniel Stone
2015-08-27 12:43   ` [PATCH v2] drm/atomic: Fix bookkeeping with TEST_ONLY, v2 Maarten Lankhorst
2015-08-27 12:48     ` Ville Syrjälä [this message]
2015-08-27 12:50       ` Maarten Lankhorst
2015-08-27 12:52         ` Ville Syrjälä
2015-08-27 13:05           ` Maarten Lankhorst
2015-08-27 13:50             ` Ville Syrjälä
2015-08-27 14:00               ` Maarten Lankhorst
2015-08-27 14:09                 ` Ville Syrjälä
2015-08-27 14:28                   ` Daniel Stone
2015-08-27 14:34                     ` Ville Syrjälä
2015-08-27 14:42                       ` Daniel Stone
2015-08-27 13:34     ` Daniel Stone
2015-08-31 13:56     ` shuang.he

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150827124858.GB5176@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=maarten.lankhorst@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.