From: Brian Norris <computersforpeace@gmail.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-mtd@lists.infradead.org,
Brian Norris <computersforpeace@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
linux-kernel@vger.kernel.org
Subject: [GIT PULL] MTD updates for 4.3-rc1
Date: Tue, 1 Sep 2015 14:58:14 -0700 [thread overview]
Message-ID: <20150901215814.GA74141@google.com> (raw)
Hi Linus,
The following changes since commit d770e558e21961ad6cfdf0ff7df0eb5d7d4f0754:
Linux 4.2-rc1 (2015-07-05 11:01:52 -0700)
are available in the git repository at:
git://git.infradead.org/linux-mtd.git tags/for-linus-20150901
for you to fetch changes up to 718e38b4d96085b4dab08d3d32e5e033aa1ba6e9:
mtd: mtd_oobtest: Fix the address offset with vary_offset case (2015-08-27 16:30:01 -0700)
----------------------------------------------------------------
MTD updates for 4.3-rc1:
SPI NOR
* reduce virtual address space requirements for fsl-quadspi memory map
* new fsl-quadspi IP support: imx6ul-qspi and imx7d-qspi
* add new NOR flash device support
* add new driver for NXP SPI Flash Interface (SPIFI)
* stop abusing SPI API structs for non-SPI framework
* fixup DT table matching for new "jedec,spi-nor" string
NAND
* brcmnand: fix big endian MIPS macro usage
* denali: refactor to use devres, dev_*() printing, etc.
* OMAP ELM: change the module alias to actually be usable
* pxa3xx_nand: fixup a few command sequencing issues -- both new and old
- race conditions in the IRQ handler status clearing
- problems when a bootloader left interrupts pending
- config issues when overriding the bootloader configuration
* new flash device support
* sunxi_nand:
- optimize timing configuration by calculation, rather than fixed
fail-safe values
- use EDO setting from ONFI
* r852: fix compiler warnings
* davinci: add 4KB page support
Core
* oobtest: correct debug print information
----------------------------------------------------------------
Alexander Stein (1):
mtd: fsl-quadspi: Actually clear TX FIFO upon write
Alexey Firago (1):
mtd: spi-nor: set SECT_4K for n25q064 SPI flash
Alexey Khoroshilov (1):
mtd: nettel: do not ignore mtd_device_register() failure in nettel_init()
Allen Xu (1):
mtd: spi-nor: fsl-quadspi: i.MX6SX: fixed the random QSPI access failed issue
Andy Shevchenko (4):
mtd: denali: hide core part from user in Kconfig
mtd: denali_pci: use module_pci_driver() macro
mtd: denali_pci: refactor driver using devres API
mtd: denali_pci: switch to dev_err()
Antoine Ténart (1):
mtd: pxa3xx_nand: add a default chunk size
Antony Pavlov (1):
mtd: spi-nor: add Spansion S25FL204K support
Axel Lin (2):
mtd: brcmnand: Fix misuse of IS_ENABLED
mtd: omap_elm: Fix module alias
Brian Norris (3):
Merge 4.2-rc1 into MTD -next
Merge MTD 4.2-rc fixes into MTD -next
mtd: m25p80: allow arbitrary OF matching for "jedec,spi-nor"
Colin Ian King (1):
mtd: physmap_of: fix null pointer deference when kzalloc returns null
Ezequiel Garcia (1):
nand: pxa3xx: Increase initial buffer size
Ezequiel García (1):
nand: pxa3xx: Increase READ_ID buffer and make the size static
Fabio Estevam (1):
mtd: spi-nor: Improve Kconfig help text for SPI_FSL_QUADSPI
Frank Li (7):
mtd: spi-nor: fsl-quadspi: add imx7d support
Documentation: fsl-quadspi: Add fsl, imx7d-qspi compatible string
mtd: spi-nor: fsl-quadspi: add i.mx6ul support
Documentation: fsl-quadspi: Add fsl, imx6ul-qspi compatible string
mtd: spi-nor: fsl-quadspi: workaround qspi can't wakeup from wait mode
mtd: spi-nor: fsl-quadspi: reset the module in the probe
mtd: spi-nor: fsl-quadspi: fix unsupported cmd when run flash_erase
Han Xu (3):
mtd: fsl-quadspi: Access multiple chips simultaneously
mtd: spi-nor: fsl-quadspi: dynamically map memory space for AHB read
mtd: spi-nor: fsl-quadspi: use quirk to distinguish different qspi version
Javier Martinez Canillas (1):
mtd: dataflash: Export OF module alias information
Joachim Eastwood (2):
doc: dt: add documentation for nxp,lpc1773-spifi
mtd: spi-nor: add driver for NXP SPI Flash Interface (SPIFI)
Nicolas Iooss (1):
mtd: r852: make ecc_reg 32-bit in r852_ecc_correct
Oleksij Rempel (1):
mtd: nand: add Toshiba TC58NVG0S3E to nand_ids table
Rafał Miłecki (1):
mtd: spi-nor: stop (ab)using struct spi_device_id
Robert Jarzmik (3):
MAINTAINERS: mtd: docg3: add docg3 maintainer
mtd: nand: pxa3xx_nand: fix early spurious interrupt
mtd: nand: pxa3xx-nand: fix random command timeouts
Roger Quadros (1):
mtd: mtd_oobtest: Fix the address offset with vary_offset case
Roy Spliet (2):
mtd: nand: sunxi: Replace failsafe timing cfg with calculated value
mtd: nand: sunxi: Set serial access mode correctly
Sandeep Paulraj (1):
nand: davinci: add support for 4K page size nand devices
Scott Wood (1):
mtd: nand: Fix NAND_USE_BOUNCE_BUFFER flag conflict
Tomer Barletz (1):
mtd: blkdevs: fix switch-bool compilation warning
shengyong (2):
mtd: nandsim: fix free of NULL pointer
mtd: nandsim: fix double free
.../devicetree/bindings/mtd/fsl-quadspi.txt | 3 +-
.../devicetree/bindings/mtd/nxp-spifi.txt | 58 +++
MAINTAINERS | 6 +
drivers/mtd/devices/m25p80.c | 18 +-
drivers/mtd/devices/mtd_dataflash.c | 1 +
drivers/mtd/maps/nettel.c | 13 +-
drivers/mtd/maps/physmap_of.c | 6 +
drivers/mtd/mtd_blkdevs.c | 8 +-
drivers/mtd/nand/Kconfig | 13 +-
drivers/mtd/nand/brcmnand/brcmnand.h | 4 +-
drivers/mtd/nand/davinci_nand.c | 42 +-
drivers/mtd/nand/denali_pci.c | 43 +-
drivers/mtd/nand/nand_ids.c | 4 +
drivers/mtd/nand/nandsim.c | 28 +-
drivers/mtd/nand/omap_elm.c | 2 +-
drivers/mtd/nand/pxa3xx_nand.c | 61 ++-
drivers/mtd/nand/r852.c | 2 +-
drivers/mtd/nand/sunxi_nand.c | 88 +++-
drivers/mtd/spi-nor/Kconfig | 14 +-
drivers/mtd/spi-nor/Makefile | 1 +
drivers/mtd/spi-nor/fsl-quadspi.c | 265 ++++++++---
drivers/mtd/spi-nor/nxp-spifi.c | 482 +++++++++++++++++++++
drivers/mtd/spi-nor/spi-nor.c | 69 ++-
drivers/mtd/tests/oobtest.c | 18 +-
include/linux/mtd/nand.h | 10 +-
25 files changed, 1021 insertions(+), 238 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mtd/nxp-spifi.txt
create mode 100644 drivers/mtd/spi-nor/nxp-spifi.c
reply other threads:[~2015-09-01 21:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150901215814.GA74141@google.com \
--to=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.