Re: [Xenomai] Xenomai tests

[Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>]

On Wed, Sep 23, 2015 at 01:21:55PM +1200, vibnwis wrote:
> On 23 September 2015 at 12:41, vibnwis <vibnwis@gmail.com> wrote:
> 
> >
> >
> > On 23 September 2015 at 05:44, Gilles Chanteperdrix <
> > gilles.chanteperdrix@xenomai.org> wrote:
> >
> >> On Wed, Sep 23, 2015 at 12:32:11AM +1200, vibnwis wrote:
> >> > By regenerating ./configure using autoreconf -fi, I managed to compile
> >> > xenomai-3-3.0-rc7 natively on PandaBoard. All things are put in their
> >> own
> >> > place by make install. However, when running latency, it produces
> >> >
> >> > > latency
> >> > 0"000.000| BUG in low_init(): [main] mlockall: Cannot allocate memory
> >>
> >> You should either run the latency test as root, or have a look at
> >> this page:
> >>
> >> http://xenomai.org/2014/06/running-a-xenomai-application-as-a-regular-user/
> >
> >
> Referring to the link, I have the following outcomes.
> /dev/rtpipe <- not exist
> 
> /sys/module/xenomai/parameters/allowed_group <- not exist as well
> 
> tried with the following commands:
> 
> ubuntu@arm:/usr/xenomai/bin$ sudo find /sys/module -type f -name
> "allowed_group" -print
> [sudo] password for ubuntu:
> <nothing came back>
> 
> ubuntu@arm:/usr/xenomai/bin$ sudo find /sys/module -type f -name
> "parameters" -print
> <nothing came back>
> 
> Any idea what/where went wrong?

Same as previous question: it seems you booted a kernel without
Xenomai support.

As explained here:
http://xenomai.org/installing-xenomai-3-x/#Booting_the_Cobalt_kernel

When you boot a kernel with Xenomai support, your kernel logs (the
result of running the "dmesg" command, not the persistent ones saved
in /var/log/kern.log), should contain a message about Cobalt being
enabled.

-- 
					    Gilles.
https://click-hack.org