All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Norris <computersforpeace@gmail.com>
To: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
	David Woodhouse <dwmw2@infradead.org>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] mtd: nand: pxa3xx-nand: switch to dmaengine
Date: Sun, 27 Sep 2015 17:18:56 -0700	[thread overview]
Message-ID: <20150928001856.GB34421@google.com> (raw)
In-Reply-To: <1441545167-23383-1-git-send-email-robert.jarzmik@free.fr>

Sparse has one complaint, but I have no others:

On Sun, Sep 06, 2015 at 03:12:47PM +0200, Robert Jarzmik wrote:
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index 2f39bfe34584..1e9d462065e8 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -15,7 +15,9 @@
...
> @@ -564,57 +567,61 @@ static void handle_data_pio(struct pxa3xx_nand_info *info)
[...]
> +static void start_data_dma(struct pxa3xx_nand_info *info)
> +{
> +	enum dma_data_direction direction;

I think this should be dma_transfer_direction. See warning below.

> +	struct dma_async_tx_descriptor *tx;
>  
>  	switch (info->state) {
>  	case STATE_DMA_WRITING:
> -		desc->dsadr = info->data_buff_phys;
> -		desc->dtadr = info->mmio_phys + NDDB;
> -		desc->dcmd |= DCMD_INCSRCADDR | DCMD_FLOWTRG;
> +		info->dma_dir = DMA_TO_DEVICE;
> +		direction = DMA_MEM_TO_DEV;
>  		break;
>  	case STATE_DMA_READING:
> -		desc->dtadr = info->data_buff_phys;
> -		desc->dsadr = info->mmio_phys + NDDB;
> -		desc->dcmd |= DCMD_INCTRGADDR | DCMD_FLOWSRC;
> +		info->dma_dir = DMA_FROM_DEVICE;
> +		direction = DMA_DEV_TO_MEM;
>  		break;
>  	default:
>  		dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
>  				info->state);
>  		BUG();
>  	}
> -
> -	DRCMR(info->drcmr_dat) = DRCMR_MAPVLD | info->data_dma_ch;
> -	DDADR(info->data_dma_ch) = info->data_desc_addr;
> -	DCSR(info->data_dma_ch) |= DCSR_RUN;
> -}
> -
> -static void pxa3xx_nand_data_dma_irq(int channel, void *data)
> -{
> -	struct pxa3xx_nand_info *info = data;
> -	uint32_t dcsr;
> -
> -	dcsr = DCSR(channel);
> -	DCSR(channel) = dcsr;
> -
> -	if (dcsr & DCSR_BUSERR) {
> -		info->retcode = ERR_DMABUSERR;
> +	info->sg.length = info->data_size +
> +		(info->oob_size ? info->spare_size + info->ecc_size : 0);
> +	dma_map_sg(info->dma_chan->device->dev, &info->sg, 1, info->dma_dir);
> +
> +	tx = dmaengine_prep_slave_sg(info->dma_chan, &info->sg, 1, direction,
> +				     DMA_PREP_INTERRUPT);

drivers/mtd/nand/pxa3xx_nand.c:631:68: warning: mixing different enum types [sparse]
drivers/mtd/nand/pxa3xx_nand.c:631:68:     int enum dma_data_direction  versus [sparse]
drivers/mtd/nand/pxa3xx_nand.c:631:68:     int enum dma_transfer_direction  [sparse]

> +	if (!tx) {
> +		dev_err(&info->pdev->dev, "prep_slave_sg() failed\n");
> +		return;
>  	}
> -
> -	info->state = STATE_DMA_DONE;
> -	enable_int(info, NDCR_INT_MASK);
> -	nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
> +	tx->callback = pxa3xx_nand_data_dma_irq;
> +	tx->callback_param = info;
> +	info->dma_cookie = dmaengine_submit(tx);
> +	dma_async_issue_pending(info->dma_chan);
> +	dev_dbg(&info->pdev->dev, "%s(dir=%d cookie=%x size=%u)\n",
> +		__func__, direction, info->dma_cookie, info->sg.length);
>  }
> -#else
> -static void start_data_dma(struct pxa3xx_nand_info *info)
> -{}
> -#endif
[...]

Brian

  parent reply	other threads:[~2015-09-28  0:19 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-06 13:12 [PATCH v2] mtd: nand: pxa3xx-nand: switch to dmaengine Robert Jarzmik
2015-09-26 20:08 ` Robert Jarzmik
2015-09-28  0:18 ` Brian Norris [this message]
2015-09-28  0:49   ` Brian Norris
2015-09-28  7:47     ` Robert Jarzmik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150928001856.GB34421@google.com \
    --to=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=ezequiel.garcia@free-electrons.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=robert.jarzmik@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.