From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Thu, 8 Oct 2015 16:52:14 +0200 From: Gilles Chanteperdrix Message-ID: <20151008145214.GF8324@hermes.click-hack.org> References: <560AB938.8090905@xenomai.org> <561568AE.30109@xenomai.org> <56156AB4.2080705@xenomai.org> <56161232.50803@xenomai.org> <20151008144340.GE21923@csclub.uwaterloo.ca> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20151008144340.GE21923@csclub.uwaterloo.ca> Subject: Re: [Xenomai] Interrupt latency close to 1ms on powerpc Xenomai 2.6.4 List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Lennart Sorensen Cc: "Xenomai@xenomai.org" On Thu, Oct 08, 2015 at 10:43:40AM -0400, Lennart Sorensen wrote: > On Thu, Oct 08, 2015 at 08:50:26AM +0200, Philippe Gerum wrote: > > This is a recent change (d818ed7d0a4682) after it became clear that > > dealing with some interrupt types for enabling/disabling IRQ lines would > > require this. > > Well at least that is an excellent explanation for the change in > behaviour. > > Too bad that it has to be done for everything, just because some types > require it, but there almost certainly isn't any nice way to do it > otherwise. > > And as you said, xenomai 3 doesn't even allow doing interrupt handling > from userspace the way we have been trying to do it. > > I suppose we could revert that patch for now until we can fix the real > problem. If you revert that patch, you will also have to remove some context checks in the recent I-pipe patches. -- Gilles. https://click-hack.org