From: Peng Fan <b51431@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] mx6qp sabreauto hangs after saveenv/reset
Date: Fri, 9 Oct 2015 10:12:28 +0800 [thread overview]
Message-ID: <20151009021224.GA10858@shlinux2> (raw)
In-Reply-To: <CAOMZO5C-7inaPxPkdOQMsL-w=Xfyxyh6GWm7QPWm_uwvmq3Mrg@mail.gmail.com>
Hi Fabio,
On Thu, Oct 08, 2015 at 01:24:19PM -0300, Fabio Estevam wrote:
>Hi Peng,
>
>On a mx6qp sabreauto I noticed that the board hangs after doing:
>
>=> saveenv
>=> reset
>
>U-Boot 2015.10-rc4-24385-ge04e21c-dirty (Oct 08 2015 - 13:08:54 -0300)
>
>CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz)
>CPU: Automotive temperature grade (-40C to 125C) at 38C
>Reset cause: POR
>Board: MX6Q-Sabreauto revA
>I2C: ready
>DRAM: 2 GiB
>PMIC: PFUZE100 ID=0x10
>Flash: 32 MiB
>NAND:
>
>(hangs here)
>
>Any ideas?
>
>Thanks
Whether plugging nand chip into the socket or without nand chip, the board reboot
well in my side. I did not do stress test, only do a few test, and each time
'reset', it can boot fine.
"
=> saveenv
Saving Environment to MMC...
Writing to MMC(0)... done
=> reset
resetting ...
U-Boot 2015.10-rc4-00050-g996ec1d (Oct 09 2015 - 10:09:19 +0800)
CPU: Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz)
CPU: Automotive temperature grade (-40C to 125C) at 38C
Reset cause: WDOG
Board: MX6Q-Sabreauto revA
I2C: ready
DRAM: 2 GiB
PMIC: PFUZE100 ID=0x10
Flash: 32 MiB
NAND: 0 MiB
MMC: FSL_SDHC: 0
No panel detected: default to HDMI
Display: HDMI (1024x768)
In: serial
Out: serial
Err: serial
Net: , FEC [PRIME]
Warning: FEC using MAC address from net device
Hit any key to stop autoboot: 0
"
Regards,
Peng.
--
next prev parent reply other threads:[~2015-10-09 2:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-08 16:24 [U-Boot] mx6qp sabreauto hangs after saveenv/reset Fabio Estevam
2015-10-08 20:25 ` Sinan Akman
2015-10-08 20:29 ` Fabio Estevam
2015-10-08 20:45 ` Sinan Akman
2015-10-09 2:12 ` Peng Fan [this message]
2015-10-09 14:59 ` Fabio Estevam
2015-10-09 15:08 ` Nitin Garg
2015-10-09 15:16 ` Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151009021224.GA10858@shlinux2 \
--to=b51431@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.