Re: [PATCH 0/4] Support multiplexed main SMBus interface on SB800

[Wolfram Sang <wsa@the-dreams.de>]

[-- Attachment #1: Type: text/plain, Size: 1714 bytes --]

On Tue, Aug 25, 2015 at 01:05:01PM +0200, Christian Fetzer wrote:
> This is an attempt to upstream the patches created by Thomas Brandon and
> Eddi De Pieri to support the multiplexed main SMBus interface on the SB800
> chipset. (https://www.mail-archive.com/linux-i2c@vger.kernel.org/msg06757.html)
> 
> I have mainly rebased the latest patch version and tested the driver on a
> HP ProLiant MicroServer G7 N54L (where this patch allows to access sensor data
> from a w83795adg).
> 
> The patched driver is running stable on the machine, given that ic2_piix4 is
> loaded before jc42 and w83795. If jc42 is loaded before i2c_piix4 calling
> sensors triggers some errors:
>     ERROR: Can't get value of subfeature temp1_min_alarm: Can't read
> 
> While the kernel log shows:
>     i2c i2c-1: Transaction (pre): CNT=0c, CMD=05, ADD=31, DAT0=03, DAT1=c0
>     i2c i2c-1: Error: no response!
>     i2c i2c-1: Transaction (post): CNT=0c, CMD=05, ADD=31, DAT0=ff, DAT1=ff
> Unfortunately I don't know how to tackle this specific issue.
> 
> Please review and let me know required changes in order to get this upstream
> finally.
> 
> Eddi, Thomas, it would be great if you could verify the changes on your
> machines.
> 
> Regards,
> Christian
> 
> Christian Fetzer (4):
>   i2c-piix4: Optionally release smba in piix4_adap_remove
>   i2c-piix4: Convert piix4_main_adapter to array
>   i2c-piix4: Add support for multiplexed main adapter in SB800
>   i2c-piix4: Add adapter port name support for SB800 chipset
> 
>  drivers/i2c/busses/i2c-piix4.c | 151 ++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 134 insertions(+), 17 deletions(-)

Jean, is that on your list?


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]