From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] Allwinner DT changes for 4.4, round 1
Date: Sun, 11 Oct 2015 17:34:14 +0100 [thread overview]
Message-ID: <20151011163414.GA12938@lukather> (raw)
Hi Arnd, Kevin, Olof,
Please pull the following changes for the 4.4 merge window.
Thanks!
Maxime
The following changes since commit f594297830b29c8204c421fafe66001178ac0f9a:
ARM: dts: Fix Makefile target for sun4i-a10-itead-iteaduino-plus (2015-09-13 14:20:26 +0200)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-4.4
for you to fetch changes up to 52095d179c5b3254fa87aaa6990e164c5cf21e12:
ARM: dts: sun6i: hummingbird: Drop AXP221 DC1SW and DC5LDO supplies (2015-10-07 11:34:54 +0100)
----------------------------------------------------------------
Allwinner DT changes for 4.4
DT patches for the 4.4 merge window, most notably:
- Enable the OTG controller on more boards
- Create new DTSI for the q8's design
- Added RSB support to the A23 and A33 SoCs
- New boards: Olimex A20 EVB, Yones bs1078v2
Plus the usual random patches enabling and / or enhancing a few things in
particular boards.
----------------------------------------------------------------
Aleksei Mamlin (2):
ARM: dts: sun4i: Enable USB DRC on the Marsboard A10
ARM: dts: sun7i: Enable USB DRC on Wexler TAB7200
Chen-Yu Tsai (12):
ARM: dts: sun6i: hummingbird: Add missing pinmux setting for gmac phy reset
ARM: dts: sun6i: Add lradc node
ARM: dts: sun6i: Add mmc2 pins for 8 bit emmc
ARM: dts: sun8i: Add PWM controller node for A23/A33
ARM: dts: sun8i: Add PWM channel 0 pinmux setting for A23/A33
ARM: dts: sun8i: Add pwm-backlight device for A23/A33 Q8 format tablets
ARM: dts: sun8i-a33: Add security system crypto engine clock and device nodes
ARM: dts: sun6i: hummingbird: Add aliases for rtc devices
ARM: dts: sun8i: Add Reduced Serial Bus controller device node to A23/A33 dtsi
ARM: dts: sun8i: q8-common: Enable RSB controller for A23/A33 Q8 tablets
ARM: dts: sun8i: sinlinx-sina33: Enable Reduced Serial Bus controller
ARM: dts: sun6i: hummingbird: Drop AXP221 DC1SW and DC5LDO supplies
Hans de Goede (21):
ARM: dts: sun4i: Enable otg in host only mode on Jesurun Q5
ARM: dts: sun4i: Enable i2c1 and i2c2 on the Chuwi V7-CW0825 tablet
ARM: dts: sun6i: Columbus: Add i2c controller for communicating with the LCD
ARM: dts: sun5i: Add simplefb node for tvencoder output
ARM: dts: sun8i: Add support for qt90h-v4 tablets
ARM: dts: sun5i: Add support for the Auxtek-T003 HDMI stick
ARM: dts: sun4i: inet97fv2: Disable unused usb controllers
ARM: dts: sun4i: inet97fv2: Add regulator nodes
ARM: dts: sun4i: inet97fv2: Enable otg controller
ARM: dts: sun4i: inet97fv2: Enable support for tablet keys
ARM: dts: sun4i: inet97fv2: Enable i2c1 and i2c2 controllers
ARM: dts: sun5i: Add dts file for inet98v_rev2 based tablets
ARM: dts: sunxi: Add sun?i-q8-common.dtsi files for q8 tablets
ARM: dts: sun4i: Add dts file inet9f-rev03 based tablets
ARM: dts: sun4i: Add dts file for iNet-1 based tablets
ARM: dts: sun5i: Add sun5i-q8-common.dtsi
ARM: dts: sun5i: Add dts file for q8 formfactor a13 based tablets
ARM: dts: sun8i: Add sun8i-a33-q8-tablet.dts file
ARM: dts: sun8i: Make ippo-q8h-v1.2.dts a symlink to q8-tablet.dts
ARM: dts: axp209: Add usb_power_supply child node to the ax209 node
ARM: dts: sun7i: Enable USB DRC on orangepi-mini
Jelle de Jong (1):
ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT
Jelle van der Waa (4):
ARM: dts: sun7i: Add regulator configuration to the pcduino3 dts file
ARM: dts: sun7i: Enable USB DRC on pcDuino 3
ARM: dts: sun5i: Add emac_pins_b definition
ARM: dts: sun5i: Add dts file for the Wobo i5 top set box
Lawrence Yu (1):
ARM: dts: sun6i: Add support for Yones Toptech bs1078v2 tablets
Marcus Cooper (1):
ARM: sun7i: dt: Add new Olimex A20 EVB device
Maxime Ripard (3):
ARM: sun8i: Add the A33 AHB1 gates clock driver
ARM: sun8i: Move A23 AHB1 gates out of common DTSI
ARM: sun8i: A23: Add missing msgbox gate
Olliver Schinagl (6):
ARM: dts: sunxi: enable otg port on the sun7i-a20-olinuxino-lime2
dts: sunxi: add eeprom to A10 OLinuXino Lime board
dts: sunxi: correct vendor prefix on OLinuXino a10s micro
dts: sunxi: add eeprom to A20 OLinuXino Lime board
dts: sunxi: add eeprom to A20 OLinuXino Lime2 board
dts: sunxi: add eeprom to A20 OLinuXino micro board
Priit Laes (1):
ARM: dts: sun4i: gemei-g9: Add accelerometer (bma250) IRQ
Ralph Benadski (1):
ARM: dts: sun7i: Enable USB DRC on cubieboard2
Reinder de Haan (1):
ARM: dts: sun7i: Enable USB DRC on the Orange pi
Sander Vermin (1):
ARM: dts: sun6i: Add accelerometer on Columbus A31
Siarhei Siamashka (1):
ARM: dts: sun4i: Add AXP209 PMU regulators for pcDuino1/2
Yassin Jaffer (1):
ARM: dts: sun7i: Add keypad clk node
arch/arm/boot/dts/Makefile | 15 +-
arch/arm/boot/dts/axp209.dtsi | 5 +
arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 12 ++
arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 11 +-
arch/arm/boot/dts/sun4i-a10-inet1.dts | 226 ++++++++++++++++++++
arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 117 ++++++++++-
arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts | 227 +++++++++++++++++++++
arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 15 ++
arch/arm/boot/dts/sun4i-a10-marsboard.dts | 19 ++
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 12 ++
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 35 +++-
arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts | 159 +++++++++++++++
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +-
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 224 ++++++++++++++++++++
arch/arm/boot/dts/sun5i-a10s.dtsi | 20 ++
arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts | 227 +++++++++++++++++++++
arch/arm/boot/dts/sun5i-a13-q8-tablet.dts | 60 ++++++
arch/arm/boot/dts/sun5i-q8-common.dtsi | 170 +++++++++++++++
arch/arm/boot/dts/sun6i-a31-colombus.dts | 24 +++
arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 13 +-
arch/arm/boot/dts/sun6i-a31.dtsi | 17 ++
.../dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 134 ++++++++++++
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 19 ++
arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 198 ++++++++++++++++++
arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 12 ++
arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 47 +++++
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 6 +
arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts | 29 +++
arch/arm/boot/dts/sun7i-a20-orangepi.dts | 29 +++
arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 54 ++++-
arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 33 ++-
arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 226 ++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 8 +
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 61 +++---
arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts | 145 +++++++++++++
arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 76 +------
arch/arm/boot/dts/sun8i-a23.dtsi | 25 +++
arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts | 134 +-----------
arch/arm/boot/dts/sun8i-a33-q8-tablet.dts | 65 ++++++
arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 4 +
arch/arm/boot/dts/sun8i-a33.dtsi | 45 ++++
arch/arm/boot/dts/sun8i-q8-common.dtsi | 101 +++++++++
arch/arm/boot/dts/sunxi-q8-common.dtsi | 77 +++++++
43 files changed, 2879 insertions(+), 259 deletions(-)
create mode 100644 arch/arm/boot/dts/sun4i-a10-inet1.dts
create mode 100644 arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
create mode 100644 arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts
create mode 100644 arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts
create mode 100644 arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts
create mode 100644 arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
create mode 100644 arch/arm/boot/dts/sun5i-q8-common.dtsi
create mode 100644 arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
create mode 100644 arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts
create mode 100644 arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts
create mode 100644 arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts
mode change 100644 => 120000 arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts
create mode 100644 arch/arm/boot/dts/sun8i-a33-q8-tablet.dts
create mode 100644 arch/arm/boot/dts/sun8i-q8-common.dtsi
create mode 100644 arch/arm/boot/dts/sunxi-q8-common.dtsi
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151011/793ccec0/attachment-0001.sig>
next reply other threads:[~2015-10-11 16:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-11 16:34 Maxime Ripard [this message]
2015-10-14 15:50 ` [GIT PULL] Allwinner DT changes for 4.4, round 1 Arnd Bergmann
2015-10-15 6:11 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151011163414.GA12938@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.