All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Cc: patches@opensource.wolfsonmicro.com,
	linux-kernel@vger.kernel.org, rf@opensource.wolfsonmicro.com,
	sameo@linux.intel.com
Subject: Re: [PATCH v2 2/6] mfd: arizona: factor out checking of jack detection state
Date: Tue, 13 Oct 2015 10:24:07 +0100	[thread overview]
Message-ID: <20151013092407.GN32409@x1> (raw)
In-Reply-To: <1443788955-7523-2-git-send-email-ckeepax@opensource.wolfsonmicro.com>

On Fri, 02 Oct 2015, Charles Keepax wrote:

> From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> 
> Currently runtime_suspend will fully power off the codec if
> the jack detection is not enabled. Not all future codecs will
> have jack detection so to prepare for these codecs this patch
> factors out the check so that it be called as needed in the
> existing codec-specific switch cases.
> 
> Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
> Acked-by: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
>  drivers/mfd/arizona-core.c |   41 ++++++++++++++++++++++++++++++++---------
>  1 files changed, 32 insertions(+), 9 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index 29be262..e32d0d3 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -487,6 +487,23 @@ static int arizona_connect_dcvdd(struct arizona *arizona)
>  	return ret;
>  }
>  
> +static int arizona_is_jack_det_active(struct arizona *arizona)
> +{
> +	unsigned int val;
> +	int ret;
> +
> +	ret = regmap_read(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, &val);
> +	if (ret) {
> +		dev_err(arizona->dev,
> +			"Failed to check jack det status: %d\n", ret);
> +		return ret;
> +	} else if (val & ARIZONA_JD1_ENA) {
> +		return 1;
> +	} else {
> +		return 0;
> +	}
> +}
> +
>  static int arizona_runtime_resume(struct device *dev)
>  {
>  	struct arizona *arizona = dev_get_drvdata(dev);
> @@ -610,20 +627,18 @@ err:
>  static int arizona_runtime_suspend(struct device *dev)
>  {
>  	struct arizona *arizona = dev_get_drvdata(dev);
> -	unsigned int val;
> +	unsigned int jd_active = 0;
>  	int ret;
>  
>  	dev_dbg(arizona->dev, "Entering AoD mode\n");
>  
> -	ret = regmap_read(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, &val);
> -	if (ret) {
> -		dev_err(dev, "Failed to check jack det status: %d\n", ret);
> -		return ret;
> -	}
> -
>  	switch (arizona->type) {
>  	case WM5110:
>  	case WM8280:
> +		jd_active = arizona_is_jack_det_active(arizona);
> +		if (jd_active < 0)
> +			return jd_active;
> +
>  		if (arizona->external_dcvdd) {
>  			ret = arizona_isolate_dcvdd(arizona);
>  			if (ret != 0)
> @@ -645,13 +660,17 @@ static int arizona_runtime_suspend(struct device *dev)
>  		}
>  		break;
>  	case WM5102:
> +		jd_active = arizona_is_jack_det_active(arizona);
> +		if (jd_active < 0)
> +			return jd_active;
> +
>  		if (arizona->external_dcvdd) {
>  			ret = arizona_isolate_dcvdd(arizona);
>  			if (ret != 0)
>  				return ret;
>  		}
>  
> -		if (!(val & ARIZONA_JD1_ENA)) {
> +		if (!jd_active) {
>  			ret = regmap_write(arizona->regmap,
>  					   ARIZONA_WRITE_SEQUENCER_CTRL_3, 0x0);
>  			if (ret) {
> @@ -663,6 +682,10 @@ static int arizona_runtime_suspend(struct device *dev)
>  		}
>  		break;
>  	default:
> +		jd_active = arizona_is_jack_det_active(arizona);
> +		if (jd_active < 0)
> +			return jd_active;
> +
>  		if (arizona->external_dcvdd) {
>  			ret = arizona_isolate_dcvdd(arizona);
>  			if (ret != 0)
> @@ -676,7 +699,7 @@ static int arizona_runtime_suspend(struct device *dev)
>  	regulator_disable(arizona->dcvdd);
>  
>  	/* Allow us to completely power down if no jack detection */
> -	if (!(val & ARIZONA_JD1_ENA)) {
> +	if (!jd_active) {
>  		dev_dbg(arizona->dev, "Fully powering off\n");
>  
>  		arizona->has_fully_powered_off = true;

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2015-10-13  9:24 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-02 12:29 [PATCH v2 1/6] mfd: arizona: factor out DCVDD isolation control Charles Keepax
2015-10-02 12:29 ` [PATCH v2 2/6] mfd: arizona: factor out checking of jack detection state Charles Keepax
2015-10-13  9:24   ` Lee Jones [this message]
2015-10-02 12:29 ` [PATCH v2 3/6] mfd: arizona: Downgrade type mismatch messages to dev_warn Charles Keepax
2015-10-13  9:24   ` Lee Jones
2015-10-02 12:29 ` [PATCH v2 4/6] mfd: arizona: Simplify adding subdevices Charles Keepax
2015-10-13  9:24   ` Lee Jones
2015-10-02 12:29 ` [PATCH v2 5/6] mfd: arizona: Remove use of codec build config #ifdefs Charles Keepax
2015-10-13  9:23   ` Lee Jones
2015-10-13  9:25   ` Lee Jones
2015-10-02 12:29 ` [PATCH v2 6/6] mfd: arizona: use correct type ID for device tree config Charles Keepax
2015-10-13  9:25   ` Lee Jones
2015-10-13  9:23 ` [PATCH v2 1/6] mfd: arizona: factor out DCVDD isolation control Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151013092407.GN32409@x1 \
    --to=lee.jones@linaro.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=rf@opensource.wolfsonmicro.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.