[U-Boot] [PATCH 00/11] imx: mx6: support lcdif

[Peng Fan <b51431@freescale.com>]

On Tue, Oct 20, 2015 at 05:19:19PM +0800, Peng Fan wrote:
>Hi Stefano,
>
>On Fri, Oct 02, 2015 at 10:48:21AM +0200, Stefano Babic wrote:
>>Hi Peng,
>>
>>I have not forgotten this series. Anyway, this has introduced aome
>>changes that could brick other boards and it is my opininio to postpone
>>it after 2015.10 release. Of course, I will send to you a full review
>>for that.
>
>The patch set has been here for a long time. Since now 2015.10 released,
>Can you please review this patch set?

Seems there are conflicts when merging with latest uboot. I'll prepare
a new V2 patch set rebased on lastest uboot.

Regards,
Peng.

>
>Thanks,
>Peng.
>
>>
>>Best regards,
>>Stefano Babic
>>
>>
>>On 10/09/2015 12:28, Peng Fan wrote:
>>> This patch set is to introduce lcdif support for i.MX6.
>>> 
>>> Now only i.MX6UL support is in this patchset.
>>> Patchset tested on mx6ul_14x14_evk and mx6ul_9x9_evk
>>> (needs 9x9 SPL patch applied).
>>> 
>>> 1/11
>>> There are two LCD interface for i.MX6SX and one interface for i.MX6UL,
>>> so change the prototype mxs_set_lcdclk to handle different interface.
>>> 
>>> [2,3]/11
>>> I am not sure, but from my understanding, the 'board_' should be discarded.
>>> 
>>> 4/11
>>> mx28 and mx6ul/sx have similar register layout and bit definitions, so
>>> move related structure and bit definitions to imx-common.
>>> 
>>> [5,6,7]/11
>>> is to add related CCM macros, clock apis for enable lcdif on i.MX6
>>> 
>>> 8/11
>>> support lcdif for i.MX6UL 14x14/9x9 board
>>> 
>>> 9/11
>>> Introduce lcdif_power_down, to make system stable when reset or boot os
>>> 
>>> [10,11]/11
>>> Need to call lcdif_power_down, before trigger wdog reset or boot os.
>>> Or we may met unexpected system hang.
>>> 
>>> Peng Fan (11):
>>>   mxs: add parameter base_addr for mxs_set_lcdclk
>>>   sandisk: sfp: correct function name
>>>   xfi3: correct function name
>>>   imx: imx-common: move lcdif structure and macro definition to
>>>     imx-common
>>>   imx: mx6: fix register address
>>>   imx: mx6: crm_reg: add LCDIF related macros
>>>   imx: mx6: add clock api for lcdif
>>>   imx: mx6ul_14x14_evk: support lcdif display
>>>   video: mxsfb: introduce lcdif_power_down
>>>   imx: mx6: implement reset_misc
>>>   imx: imx-common: power down lcdif before boot os
>>> 
>>>  arch/arm/cpu/arm926ejs/mxs/clock.c                |   2 +-
>>>  arch/arm/cpu/armv7/mx6/clock.c                    | 239 ++++++++++++++++++++++
>>>  arch/arm/cpu/armv7/mx6/soc.c                      |   8 +
>>>  arch/arm/imx-common/cpu.c                         |   3 +
>>>  arch/arm/include/asm/arch-mx6/clock.h             |   2 +
>>>  arch/arm/include/asm/arch-mx6/crm_regs.h          |  34 ++-
>>>  arch/arm/include/asm/arch-mx6/imx-regs.h          |  15 +-
>>>  arch/arm/include/asm/arch-mxs/clock.h             |   2 +-
>>>  arch/arm/include/asm/arch-mxs/regs-lcdif.h        | 201 +-----------------
>>>  arch/arm/include/asm/imx-common/regs-lcdif.h      | 222 ++++++++++++++++++++
>>>  arch/arm/include/asm/imx-common/sys_proto.h       |   2 +
>>>  board/creative/xfi3/xfi3.c                        |   2 +-
>>>  board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c |  63 ++++++
>>>  board/sandisk/sansa_fuze_plus/sfp.c               |   2 +-
>>>  drivers/video/mxsfb.c                             |  19 +-
>>>  include/configs/mx6ul_14x14_evk.h                 |  18 ++
>>>  16 files changed, 620 insertions(+), 214 deletions(-)
>>>  create mode 100644 arch/arm/include/asm/imx-common/regs-lcdif.h
>>> 
>>
>>
>>-- 
>>=====================================================================
>>DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
>>HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>>Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
>>=====================================================================
>
>-- 

--