Re: [PATCH 02/10] ata: ahch_brcmstb: add data for port offset

[Brian Norris <computersforpeace@gmail.com>]

On Fri, Oct 23, 2015 at 10:44:15AM +0900, Jaedon Shin wrote:
> Add data of device node for port offset.
> 
> Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
> ---
>  drivers/ata/ahci_brcmstb.c | 25 +++++++++++++++++--------
>  1 file changed, 17 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
> index 14b7305d2ba0..8cf6f7d4798f 100644
> --- a/drivers/ata/ahci_brcmstb.c
> +++ b/drivers/ata/ahci_brcmstb.c
> @@ -72,6 +72,7 @@
>  struct brcm_ahci_priv {
>  	struct device *dev;
>  	void __iomem *top_ctrl;
> +	u32 port_offset;

You're gonna need to vary more than just the port offset for 40nm vs.
28nm, I think. See my comments on patch 3.

Brian

>  	u32 port_mask;
>  };
>  
> @@ -110,7 +111,7 @@ static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
>  static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
>  {
>  	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
> -				(port * SATA_TOP_CTRL_PHY_OFFS);
> +				(port * priv->port_offset);
>  	void __iomem *p;
>  	u32 reg;
>  
> @@ -139,7 +140,7 @@ static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
>  static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
>  {
>  	void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
> -				(port * SATA_TOP_CTRL_PHY_OFFS);
> +				(port * priv->port_offset);
>  	void __iomem *p;
>  	u32 reg;
>  
> @@ -234,6 +235,13 @@ static int brcm_ahci_resume(struct device *dev)
>  }
>  #endif
>  
> +static const struct of_device_id ahci_of_match[] = {
> +	{.compatible = "brcm,bcm7445-ahci",
> +			.data = (void *)SATA_TOP_CTRL_PHY_OFFS},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, ahci_of_match);
> +
>  static struct scsi_host_template ahci_platform_sht = {
>  	AHCI_SHT(DRV_NAME),
>  };
> @@ -241,6 +249,7 @@ static struct scsi_host_template ahci_platform_sht = {
>  static int brcm_ahci_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> +	const struct of_device_id *of_id = NULL;
>  	struct brcm_ahci_priv *priv;
>  	struct ahci_host_priv *hpriv;
>  	struct resource *res;
> @@ -256,6 +265,12 @@ static int brcm_ahci_probe(struct platform_device *pdev)
>  	if (IS_ERR(priv->top_ctrl))
>  		return PTR_ERR(priv->top_ctrl);
>  
> +	of_id = of_match_node(ahci_of_match, dev->of_node);
> +	if (!of_id)
> +		return -EINVAL;
> +
> +	priv->port_offset = (u32)of_id->data;
> +
>  	brcm_sata_init(priv);
>  
>  	priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
> @@ -299,12 +314,6 @@ static int brcm_ahci_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> -static const struct of_device_id ahci_of_match[] = {
> -	{.compatible = "brcm,bcm7445-ahci"},
> -	{},
> -};
> -MODULE_DEVICE_TABLE(of, ahci_of_match);
> -
>  static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
>  
>  static struct platform_driver brcm_ahci_driver = {
> -- 
> 2.6.2
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html