From: Peter Chen <peter.chen@freescale.com>
To: Saurabh Sengar <saurabh.truth@gmail.com>
Cc: <gregkh@linuxfoundation.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] usb : replace dma_pool_alloc and memset with dma_pool_zalloc
Date: Wed, 28 Oct 2015 17:14:54 +0800 [thread overview]
Message-ID: <20151028091446.GB10432@shlinux2> (raw)
In-Reply-To: <1446016475-17100-1-git-send-email-saurabh.truth@gmail.com>
On Wed, Oct 28, 2015 at 12:44:35PM +0530, Saurabh Sengar wrote:
> replace dma_pool_alloc and memset with a single call to dma_pool_zalloc
>
> Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
> ---
> drivers/usb/chipidea/udc.c | 3 +--
> drivers/usb/gadget/udc/gr_udc.c | 3 +--
> drivers/usb/host/uhci-q.c | 3 +--
> drivers/usb/host/whci/qset.c | 3 +--
> drivers/usb/host/xhci-mem.c | 6 ++----
> 5 files changed, 6 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
> index 8223fe7..235b948f 100644
> --- a/drivers/usb/chipidea/udc.c
> +++ b/drivers/usb/chipidea/udc.c
> @@ -349,14 +349,13 @@ static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
> if (node == NULL)
> return -ENOMEM;
>
> - node->ptr = dma_pool_alloc(hwep->td_pool, GFP_ATOMIC,
> + node->ptr = dma_pool_zalloc(hwep->td_pool, GFP_ATOMIC,
> &node->dma);
> if (node->ptr == NULL) {
> kfree(node);
> return -ENOMEM;
> }
>
> - memset(node->ptr, 0, sizeof(struct ci_hw_td));
> node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
> node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
> node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
> diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c
> index b9429bc..39b7136 100644
> --- a/drivers/usb/gadget/udc/gr_udc.c
> +++ b/drivers/usb/gadget/udc/gr_udc.c
> @@ -253,13 +253,12 @@ static struct gr_dma_desc *gr_alloc_dma_desc(struct gr_ep *ep, gfp_t gfp_flags)
> dma_addr_t paddr;
> struct gr_dma_desc *dma_desc;
>
> - dma_desc = dma_pool_alloc(ep->dev->desc_pool, gfp_flags, &paddr);
> + dma_desc = dma_pool_zalloc(ep->dev->desc_pool, gfp_flags, &paddr);
> if (!dma_desc) {
> dev_err(ep->dev->dev, "Could not allocate from DMA pool\n");
> return NULL;
> }
>
> - memset(dma_desc, 0, sizeof(*dma_desc));
> dma_desc->paddr = paddr;
>
> return dma_desc;
> diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
> index da6f56d..c17ea15 100644
> --- a/drivers/usb/host/uhci-q.c
> +++ b/drivers/usb/host/uhci-q.c
> @@ -248,11 +248,10 @@ static struct uhci_qh *uhci_alloc_qh(struct uhci_hcd *uhci,
> dma_addr_t dma_handle;
> struct uhci_qh *qh;
>
> - qh = dma_pool_alloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle);
> + qh = dma_pool_zalloc(uhci->qh_pool, GFP_ATOMIC, &dma_handle);
> if (!qh)
> return NULL;
>
> - memset(qh, 0, sizeof(*qh));
> qh->dma_handle = dma_handle;
>
> qh->element = UHCI_PTR_TERM(uhci);
> diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
> index dc31c42..3297473 100644
> --- a/drivers/usb/host/whci/qset.c
> +++ b/drivers/usb/host/whci/qset.c
> @@ -30,10 +30,9 @@ struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags)
> struct whc_qset *qset;
> dma_addr_t dma;
>
> - qset = dma_pool_alloc(whc->qset_pool, mem_flags, &dma);
> + qset = dma_pool_zalloc(whc->qset_pool, mem_flags, &dma);
> if (qset == NULL)
> return NULL;
> - memset(qset, 0, sizeof(struct whc_qset));
>
> qset->qset_dma = dma;
> qset->whc = whc;
> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
> index 41f841f..060c20c 100644
> --- a/drivers/usb/host/xhci-mem.c
> +++ b/drivers/usb/host/xhci-mem.c
> @@ -47,13 +47,12 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
> if (!seg)
> return NULL;
>
> - seg->trbs = dma_pool_alloc(xhci->segment_pool, flags, &dma);
> + seg->trbs = dma_pool_zalloc(xhci->segment_pool, flags, &dma);
> if (!seg->trbs) {
> kfree(seg);
> return NULL;
> }
>
> - memset(seg->trbs, 0, TRB_SEGMENT_SIZE);
> /* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */
> if (cycle_state == 0) {
> for (i = 0; i < TRBS_PER_SEGMENT; i++)
> @@ -517,12 +516,11 @@ static struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci
> if (type == XHCI_CTX_TYPE_INPUT)
> ctx->size += CTX_SIZE(xhci->hcc_params);
>
> - ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
> + ctx->bytes = dma_pool_zalloc(xhci->device_pool, flags, &ctx->dma);
> if (!ctx->bytes) {
> kfree(ctx);
> return NULL;
> }
> - memset(ctx->bytes, 0, ctx->size);
> return ctx;
> }
>
> --
For chipidea changes:
Acked-by: Peter Chen <peter.chen@freescale.com>
--
Best Regards,
Peter Chen
next prev parent reply other threads:[~2015-10-28 9:16 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-28 7:14 [PATCH] usb : replace dma_pool_alloc and memset with dma_pool_zalloc Saurabh Sengar
2015-10-28 9:14 ` Peter Chen [this message]
2015-11-25 3:19 ` Saurabh Sengar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151028091446.GB10432@shlinux2 \
--to=peter.chen@freescale.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=saurabh.truth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.