Re: [PATCH 4/4] Input: tsc2004 - Document ts2004 dt bindings

[Dmitry Torokhov <dmitry.torokhov@gmail.com>]

On Mon, Nov 02, 2015 at 02:50:29PM -0600, Michael Welling wrote:
> On Mon, Nov 02, 2015 at 09:19:50AM -0600, Rob Herring wrote:
> > > +Required properties:
> > > + - compatible                : "ti,tsc2004"
> > > + - interrupts                : IRQ specifier
> > > + - vio-supply                 : Regulator specifier
> > 
> > reg property?
> 
> Rob,
> 
> It appears that I missed this in the description.
> 
> Probably because I was following the lead of the ts2005 description.
> 
> How does this look:
> - reg			: I2C address. 0x48 - 0x4b based on the voltage applied to
> 			  the AD1 and AD0 inputs on the IC.
> 

How about the version below?

Thanks.

-- 
Dmitry


Input: tsc2004 - document ts2004 dt bindings

From: Michael Welling <mwelling@ieee.org>

Adds documentation for the devicetree bindings of the new tsc2004 driver.

Signed-off-by: Michael Welling <mwelling@ieee.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 .../bindings/input/touchscreen/tsc2005.txt         |   34 ++++++++++++++++----
 1 file changed, 28 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
index 09089a6..b80c04b 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
@@ -1,14 +1,15 @@
-* Texas Instruments tsc2005 touchscreen controller
+* Texas Instruments tsc2004 and tsc2005 touchscreen controllers
 
 Required properties:
- - compatible		      : "ti,tsc2005"
- - reg			      : SPI device address
- - spi-max-frequency	      : Maximal SPI speed
+ - compatible		      : "ti,tsc2004" or "ti,tsc2005"
+ - reg			      : Device address
  - interrupts		      : IRQ specifier
- - reset-gpios		      : GPIO specifier
- - vio-supply                 : Regulator specifier
+ - spi-max-frequency	      : Maximum SPI clocking speed of the device
+			        (for tsc2005)
 
 Optional properties:
+ - vio-supply		      : Regulator specifier
+ - reset-gpios		      : GPIO specifier for the controller reset line
  - ti,x-plate-ohms	      : integer, resistance of the touchscreen's X plates
 				in ohm (defaults to 280)
  - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
@@ -18,6 +19,27 @@ Optional properties:
 
 Example:
 
+&i2c3 {
+	tsc2004@48 {
+		compatible = "ti,tsc2004";
+		reg = <0x48>;
+		vio-supply = <&vio>;
+
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+}
+
 &mcspi1 {
 	tsc2005@0 {
 		compatible = "ti,tsc2005";