From: Stephen Hemminger <stephen@networkplumber.org>
To: Jon Maloy <jon.maloy@ericsson.com>, Ying Xue <ying.xue@windriver.com>
Cc: netdev@vger.kernel.org
Subject: Fw: New Defects reported by Coverity Scan for Linux
Date: Tue, 3 Nov 2015 08:18:12 -0800 [thread overview]
Message-ID: <20151103081812.6c55fbe5@xeon-e3> (raw)
The TIPC case is a missing check for memory allocation failure.
Begin forwarded message:
Date: Mon, 02 Nov 2015 23:45:55 -0800
From: scan-admin@coverity.com
To: stephen@networkplumber.org
Subject: New Defects reported by Coverity Scan for Linux
Hi,
Please find the latest report on new defect(s) introduced to Linux found with Coverity Scan.
4 new defect(s) introduced to Linux found with Coverity Scan.
9 defect(s), reported by Coverity Scan earlier, were marked fixed in the recent build analyzed by Coverity Scan.
New defect(s) Reported-by: Coverity Scan
Showing 4 of 4 defect(s)
** CID 1338065: Error handling issues (CHECKED_RETURN)
/net/tipc/udp_media.c: 162 in tipc_udp_send_msg()
________________________________________________________________________________________________________
*** CID 1338065: Error handling issues (CHECKED_RETURN)
/net/tipc/udp_media.c: 162 in tipc_udp_send_msg()
156 struct udp_media_addr *dst = (struct udp_media_addr *)&dest->value;
157 struct udp_media_addr *src = (struct udp_media_addr *)&b->addr.value;
158 struct sk_buff *clone;
159 struct rtable *rt;
160
161 if (skb_headroom(skb) < UDP_MIN_HEADROOM)
>>> CID 1338065: Error handling issues (CHECKED_RETURN)
>>> Calling "pskb_expand_head" without checking return value (as is done elsewhere 51 out of 56 times).
162 pskb_expand_head(skb, UDP_MIN_HEADROOM, 0, GFP_ATOMIC);
163
164 clone = skb_clone(skb, GFP_ATOMIC);
165 skb_set_inner_protocol(clone, htons(ETH_P_TIPC));
166 ub = rcu_dereference_rtnl(b->media_ptr);
167 if (!ub) {
** CID 1338066: Null pointer dereferences (FORWARD_NULL)
/net/openvswitch/flow_netlink.c: 1379 in __ovs_nla_put_key()
________________________________________________________________________________________________________
*** CID 1338066: Null pointer dereferences (FORWARD_NULL)
/net/openvswitch/flow_netlink.c: 1379 in __ovs_nla_put_key()
1373 goto nla_put_failure;
1374
1375 if (nla_put_u32(skb, OVS_KEY_ATTR_PRIORITY, output->phy.priority))
1376 goto nla_put_failure;
1377
1378 if ((swkey->tun_key.u.ipv4.dst || is_mask)) {
>>> CID 1338066: Null pointer dereferences (FORWARD_NULL)
>>> Assigning: "opts" = "NULL".
1379 const void *opts = NULL;
1380
1381 if (output->tun_key.tun_flags & TUNNEL_OPTIONS_PRESENT)
1382 opts = TUN_METADATA_OPTS(output, swkey->tun_opts_len);
1383
1384 if (ipv4_tun_to_nlattr(skb, &output->tun_key, opts,
** CID 1338067: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
/drivers/net/ethernet/cavium/thunder/nic_main.c: 407 in nic_config_cpi()
________________________________________________________________________________________________________
*** CID 1338067: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
/drivers/net/ethernet/cavium/thunder/nic_main.c: 407 in nic_config_cpi()
401 nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi << 3),
402 (vnic << 24) | (padd << 16) |
403 (rssi_base + rssi));
404 } else {
405 /* Set MPI_ALG to '0' to disable MCAM parsing */
406 nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi << 3),
>>> CID 1338067: Integer handling issues (OVERFLOW_BEFORE_WIDEN)
>>> Potentially overflowing expression "padd << 16" with type "u32" (32 bits, unsigned) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type "u64" (64 bits, unsigned).
407 (padd << 16));
408 /* MPI index is same as CPI if MPI_ALG is not enabled */
409 nic_reg_write(nic, NIC_PF_MPI_0_2047_CFG | (cpi << 3),
410 (vnic << 24) | (rssi_base + rssi));
411 }
412
** CID 1338068: Null pointer dereferences (REVERSE_INULL)
/include/net/dst_metadata.h: 69 in tun_dst_unclone()
________________________________________________________________________________________________________
*** CID 1338068: Null pointer dereferences (REVERSE_INULL)
/include/net/dst_metadata.h: 69 in tun_dst_unclone()
63 static inline struct metadata_dst *tun_dst_unclone(struct sk_buff *skb)
64 {
65 struct metadata_dst *md_dst = skb_metadata_dst(skb);
66 int md_size = md_dst->u.tun_info.options_len;
67 struct metadata_dst *new_md;
68
>>> CID 1338068: Null pointer dereferences (REVERSE_INULL)
>>> Null-checking "md_dst" suggests that it may be null, but it has already been dereferenced on all paths leading to the check.
69 if (!md_dst)
70 return ERR_PTR(-EINVAL);
71
72 new_md = metadata_dst_alloc(md_size, GFP_ATOMIC);
73 if (!new_md)
74 return ERR_PTR(-ENOMEM);
________________________________________________________________________________________________________
To view the defects in Coverity Scan visit, https://scan.coverity.com/projects/linux?tab=overview
To manage Coverity Scan email notifications for "stephen@networkplumber.org", click https://scan.coverity.com/subscriptions/edit?email=stephen%40networkplumber.org&token=41b352b884ef3fc73426635eebc294c3
next reply other threads:[~2015-11-03 16:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-03 16:18 Stephen Hemminger [this message]
2015-11-03 19:32 ` New Defects reported by Coverity Scan for Linux Jon Maloy
2015-11-04 1:45 ` Fw: " Ying Xue
-- strict thread matches above, loose matches on Subject: below --
2017-04-24 23:41 Stephen Hemminger
2017-04-25 0:09 ` Cong Wang
2017-04-25 0:23 ` Jamal Hadi Salim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151103081812.6c55fbe5@xeon-e3 \
--to=stephen@networkplumber.org \
--cc=jon.maloy@ericsson.com \
--cc=netdev@vger.kernel.org \
--cc=ying.xue@windriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.