From: "Michael S. Tsirkin" <mst@redhat.com>
To: Cao jin <caoj.fnst@cn.fujitsu.com>
Cc: Chen Fan <chen.fan.fnst@cn.fujitsu.com>,
alex.williamson@redhat.com, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v13 10/13] pci: add pci device pre-post reset callbacks for host bus reset
Date: Wed, 11 Nov 2015 18:56:05 +0200 [thread overview]
Message-ID: <20151111185559-mutt-send-email-mst@redhat.com> (raw)
In-Reply-To: <4c3082e57fbcc6c2a0ebf032f7eabea273d7e935.1447231392.git.chen.fan.fnst@cn.fujitsu.com>
On Wed, Nov 11, 2015 at 06:34:28PM +0800, Cao jin wrote:
> From: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
>
> Particularly, For vfio devices, Once need to recovery devices
> by bus reset such as AER, we always need to reset the host bus
> to recovery the devices under the bus, so we need to add pci device
> callbacks to specify to do host bus reset.
>
> Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
> ---
> hw/pci/pci.c | 18 ++++++++++++++++++
> hw/pci/pci_bridge.c | 9 +++++++++
> hw/vfio/pci.c | 26 ++++++++++++++++++++++++++
> hw/vfio/pci.h | 2 ++
> include/hw/pci/pci.h | 7 +++++++
> 5 files changed, 62 insertions(+)
>
> diff --git a/hw/pci/pci.c b/hw/pci/pci.c
> index f6ca6ef..64fa2cc 100644
> --- a/hw/pci/pci.c
> +++ b/hw/pci/pci.c
> @@ -247,6 +247,24 @@ static void pci_do_device_reset(PCIDevice *dev)
> msix_reset(dev);
> }
>
> +void pci_device_pre_reset(PCIBus *bus, PCIDevice *dev, void *unused)
> +{
> + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(dev);
> +
> + if (dc->pre_reset) {
> + dc->pre_reset(dev);
> + }
> +}
> +
> +void pci_device_post_reset(PCIBus *bus, PCIDevice *dev, void *unused)
> +{
> + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(dev);
> +
> + if (dc->post_reset) {
> + dc->post_reset(dev);
> + }
> +}
> +
> /*
> * This function is called on #RST and FLR.
> * FLR if PCI_EXP_DEVCTL_BCR_FLR is set
> diff --git a/hw/pci/pci_bridge.c b/hw/pci/pci_bridge.c
> index 40c97b1..ddb76ab 100644
> --- a/hw/pci/pci_bridge.c
> +++ b/hw/pci/pci_bridge.c
> @@ -267,8 +267,17 @@ void pci_bridge_write_config(PCIDevice *d,
>
> newctl = pci_get_word(d->config + PCI_BRIDGE_CONTROL);
> if (~oldctl & newctl & PCI_BRIDGE_CTL_BUS_RESET) {
> + /*
> + * Notify all vfio-pci devices under the bus
> + * should do physical bus reset.
> + */
> + PCIBus *sec_bus = pci_bridge_get_sec_bus(s);
> + pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
> + pci_device_pre_reset, NULL);
> /* Trigger hot reset on 0->1 transition. */
> qbus_reset_all(&s->sec_bus.qbus);
> + pci_for_each_device(sec_bus, pci_bus_num(sec_bus),
> + pci_device_post_reset, NULL);
> }
> }
>
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index e619998..90df393 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -39,6 +39,7 @@
>
> static void vfio_disable_interrupts(VFIOPCIDevice *vdev);
> static void vfio_mmap_set_enabled(VFIOPCIDevice *vdev, bool enabled);
> +static int vfio_pci_hot_reset(VFIOPCIDevice *vdev, bool single);
>
> /*
> * Disabling BAR mmaping can be slow, but toggling it around INTx can
> @@ -1879,6 +1880,8 @@ static int vfio_check_host_bus_reset(VFIOPCIDevice *vdev)
> /* List all affected devices by bus reset */
> devices = &info->devices[0];
>
> + vdev->single_depend_dev = (info->count == 1);
> +
> /* Verify that we have all the groups required */
> for (i = 0; i < info->count; i++) {
> PCIHostDeviceAddress host;
> @@ -2003,10 +2006,26 @@ static int vfio_check_bus_reset(NotifierWithReturn *n, void *opaque)
> return vfio_check_host_bus_reset(vdev);
> }
>
> +static void vfio_aer_pre_reset(PCIDevice *pdev)
> +{
> + VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
> +
> + vdev->aer_reset = true;
> + vfio_pci_hot_reset(vdev, vdev->single_depend_dev);
> +}
> +
> +static void vfio_aer_post_reset(PCIDevice *pdev)
> +{
> + VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
> +
> + vdev->aer_reset = false;
> +}
> +
> static int vfio_setup_aer(VFIOPCIDevice *vdev, uint8_t cap_ver,
> int pos, uint16_t size)
> {
> PCIDevice *pdev = &vdev->pdev;
> + PCIDeviceClass *dc = PCI_DEVICE_GET_CLASS(pdev);
> PCIDevice *dev_iter;
> uint8_t type;
> uint32_t errcap;
> @@ -2060,6 +2079,9 @@ static int vfio_setup_aer(VFIOPCIDevice *vdev, uint8_t cap_ver,
> vdev->hotplug_notifier.notify = vfio_check_bus_reset;
> pci_bus_add_hotplug_notifier(pdev->bus, &vdev->hotplug_notifier);
>
> + dc->pre_reset = vfio_aer_pre_reset;
> + dc->post_reset = vfio_aer_post_reset;
> +
> return 0;
>
> error:
> @@ -2953,6 +2975,10 @@ static void vfio_pci_reset(DeviceState *dev)
>
> trace_vfio_pci_reset(vdev->vbasedev.name);
>
> + if (vdev->aer_reset) {
> + return;
> + }
> +
> vfio_pci_pre_reset(vdev);
>
> if (vdev->resetfn && !vdev->resetfn(vdev)) {
> diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
> index b385f07..1b89b83 100644
> --- a/hw/vfio/pci.h
> +++ b/hw/vfio/pci.h
> @@ -144,6 +144,8 @@ typedef struct VFIOPCIDevice {
> bool no_kvm_msix;
>
> NotifierWithReturn hotplug_notifier;
> + bool aer_reset;
> + bool single_depend_dev;
> } VFIOPCIDevice;
>
> uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len);
> diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
> index 379b6e1..6b1f2d4 100644
> --- a/include/hw/pci/pci.h
> +++ b/include/hw/pci/pci.h
> @@ -105,6 +105,9 @@ typedef void PCIMapIORegionFunc(PCIDevice *pci_dev, int region_num,
> pcibus_t addr, pcibus_t size, int type);
> typedef void PCIUnregisterFunc(PCIDevice *pci_dev);
>
> +typedef void PCIPreResetFunc(PCIDevice *pci_dev);
> +typedef void PCIPostResetFunc(PCIDevice *pci_dev);
> +
> typedef struct PCIIORegion {
> pcibus_t addr; /* current PCI mapping address. -1 means not mapped */
> #define PCI_BAR_UNMAPPED (~(pcibus_t)0)
> @@ -193,6 +196,8 @@ typedef struct PCIDeviceClass {
> PCIUnregisterFunc *exit;
> PCIConfigReadFunc *config_read;
> PCIConfigWriteFunc *config_write;
> + PCIPreResetFunc *pre_reset;
> + PCIPostResetFunc *post_reset;
>
> uint16_t vendor_id;
> uint16_t device_id;
> @@ -380,6 +385,8 @@ bool pci_intx_route_changed(PCIINTxRoute *old, PCIINTxRoute *new);
> void pci_bus_fire_intx_routing_notifier(PCIBus *bus);
> void pci_device_set_intx_routing_notifier(PCIDevice *dev,
> PCIINTxRoutingNotifier notifier);
> +void pci_device_pre_reset(PCIBus *bus, PCIDevice *d, void *opaque);
> +void pci_device_post_reset(PCIBus *bus, PCIDevice *d, void *opaque);
> void pci_device_reset(PCIDevice *dev);
>
> PCIDevice *pci_nic_init_nofail(NICInfo *nd, PCIBus *rootbus,
> --
> 1.9.3
next prev parent reply other threads:[~2015-11-11 17:02 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-11 10:34 [Qemu-devel] [PATCH v13 00/13] vfio-pci: pass the aer error to guest Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 01/13] vfio: extract vfio_get_hot_reset_info as a single function Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 02/13] vfio: squeeze out vfio_pci_do_hot_reset for support bus reset Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 03/13] pcie: modify the capability size assert Cao jin
2015-11-11 16:55 ` Michael S. Tsirkin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 04/13] vfio: make the 4 bytes aligned for capability size Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 05/13] vfio: add pcie extanded capability support Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 06/13] aer: impove pcie_aer_init to support vfio device Cao jin
2015-11-11 16:55 ` Michael S. Tsirkin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 07/13] vfio: add aer support for " Cao jin
2015-11-11 20:49 ` Alex Williamson
2015-11-12 11:54 ` Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 08/13] vfio: add check host bus reset is support or not Cao jin
2015-11-11 20:53 ` Alex Williamson
2015-11-12 11:56 ` Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 09/13] add check reset mechanism when hotplug vfio device Cao jin
2015-11-12 11:51 ` Michael S. Tsirkin
2015-11-13 3:28 ` Cao jin
2015-11-13 21:04 ` Alex Williamson
2015-11-16 10:18 ` Chen Fan
2015-11-16 16:05 ` Alex Williamson
2015-11-17 2:48 ` Chen Fan
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 10/13] pci: add pci device pre-post reset callbacks for host bus reset Cao jin
2015-11-11 16:56 ` Michael S. Tsirkin [this message]
2015-11-11 20:58 ` Alex Williamson
2015-11-12 11:58 ` Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 11/13] pcie_aer: expose pcie_aer_msg() interface Cao jin
2015-11-11 16:56 ` Michael S. Tsirkin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 12/13] vfio-pci: pass the aer error to guest Cao jin
2015-11-11 10:34 ` [Qemu-devel] [PATCH v13 13/13] vfio: add 'aer' property to expose aercap Cao jin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151111185559-mutt-send-email-mst@redhat.com \
--to=mst@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=caoj.fnst@cn.fujitsu.com \
--cc=chen.fan.fnst@cn.fujitsu.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.