Re: kasan r8169 use-after-free trace.

[Dave Jones <davej@codemonkey.org.uk>]

On Wed, Nov 11, 2015 at 10:19:28AM +0100, Francois Romieu wrote:
 > Dave Jones <davej@codemonkey.org.uk> :
 > > This happens during boot, (and then there's a flood of traces that happen so fast
 > > afterwards it completely overwhelms serial console; not sure if they're the
 > > same/related or not).
 > > 
 > > ==================================================================
 > > BUG: KASAN: use-after-free in rtl8169_poll+0x4b6/0xb70 at addr ffff8801d43b3288
 > > Read of size 1 by task kworker/0:3/188
 > > =============================================================================
 > > BUG kmalloc-256 (Not tainted): kasan: bad access detected
 > > -----------------------------------------------------------------------------
 > > 
 > > Disabling lock debugging due to kernel taint
 > > INFO: Slab 0xffffea000750ecc0 objects=16 used=16 fp=0x          (null) flags=0x8000000000000080
 > > INFO: Object 0xffff8801d43b3200 @offset=512 fp=0xffff8801d43b3800
 > > 
 > > Bytes b4 ffff8801d43b31f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
 > > Object ffff8801d43b3200: 00 38 3b d4 01 88 ff ff 00 00 00 00 00 00 00 00  .8;.............
 > 
 > Does the patch below cure it ?

It did, thanks for the quick turnaround!  It also turns out this was responsible
for the flood of spew afterwards. It's completely silent when I apply your diff.

	Dave