From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Sat, 14 Nov 2015 08:16:07 +0100 From: Gilles Chanteperdrix Message-ID: <20151114071607.GH1820@hermes.click-hack.org> References: <20151114053841.GF1820@hermes.click-hack.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: Subject: Re: [Xenomai] [PATCH] IPIPE patch for BCM2709/RPI2. List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Mathieu Rondonneau Cc: xenomai@xenomai.org On Fri, Nov 13, 2015 at 10:06:56PM -0800, Mathieu Rondonneau wrote: > On 15-11-13 09:38 PM, Gilles Chanteperdrix wrote: > > On Fri, Nov 13, 2015 at 09:31:23PM -0800, Mathieu Rondonneau wrote: > >> From 6f985ebdd2c99257fb3873b9cb83ba6572dff60a Mon Sep 17 00:00:00 2001 > >> From: Mathieu Rondonneau > >> Date: Fri, 13 Nov 2015 20:59:49 -0800 > >> Subject: [PATCH] IPIPE patch for BCM2709. > >> > >> - kernel: https://github.com/raspberrypi/linux (rpi-3.18.y) > >> - 1bb18c8f721ef674a447f3622273f2e2de7a205c > > > > As explained here: > > http://xenomai.org/2014/09/porting-xenomai-dual-kernel-to-a-new-arm-soc/#Working_with_vendor_forks > > > > If the patch is not for mainline Linux it should be sent as a couple > > of pre and post patches. > > > there is no pre.patch required here, the ipipe patch from xenomai repo > apply with no conflict so I am not sure what to put in pre.patch. Yes, sorry. Just read your patch. See comments in other post. -- Gilles. https://click-hack.org