All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Hemminger <shemming@brocade.com>
To: Harry van Haaren <harry.van.haaren@intel.com>
Cc: dev@dpdk.org
Subject: Re: [PATCH 1/4] e1000: remove crc size from all byte counters
Date: Mon, 16 Nov 2015 08:54:40 -0800	[thread overview]
Message-ID: <20151116085440.3dca3ce0@samsung9> (raw)
In-Reply-To: <1447670117-17723-2-git-send-email-harry.van.haaren@intel.com>

On Mon, 16 Nov 2015 10:35:14 +0000
Harry van Haaren <harry.van.haaren@intel.com> wrote:

> This patch removes the crc bytes from byte counter statistics.
> 
> Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
> ---
>  drivers/net/e1000/igb_ethdev.c | 19 +++++++++++++++++--
>  1 file changed, 17 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
> index 88995b0..0ad7341 100644
> --- a/drivers/net/e1000/igb_ethdev.c
> +++ b/drivers/net/e1000/igb_ethdev.c
> @@ -1480,6 +1480,13 @@ igb_read_stats_registers(struct e1000_hw *hw, struct e1000_hw_stats *stats)
>  {
>  	int pause_frames;
>  
> +	uint64_t old_gprc  = stats->gprc;
> +	uint64_t old_gptc  = stats->gptc;
> +	uint64_t old_tpr   = stats->tpr;
> +	uint64_t old_tpt   = stats->tpt;
> +	uint64_t old_rpthc = stats->rpthc;
> +	uint64_t old_hgptc = stats->hgptc;
> +
>  	if(hw->phy.media_type == e1000_media_type_copper ||
>  	    (E1000_READ_REG(hw, E1000_STATUS) & E1000_STATUS_LU)) {
>  		stats->symerrs +=
> @@ -1521,10 +1528,13 @@ igb_read_stats_registers(struct e1000_hw *hw, struct e1000_hw_stats *stats)
>  	/* For the 64-bit byte counters the low dword must be read first. */
>  	/* Both registers clear on the read of the high dword */
>  
> +	/* Workaround CRC bytes included in size, take away 4 bytes/packet */
>  	stats->gorc += E1000_READ_REG(hw, E1000_GORCL);
>  	stats->gorc += ((uint64_t)E1000_READ_REG(hw, E1000_GORCH) << 32);
> +	stats->gorc -= (stats->gprc - old_gprc) * 4;
>  	stats->gotc += E1000_READ_REG(hw, E1000_GOTCL);
>  	stats->gotc += ((uint64_t)E1000_READ_REG(hw, E1000_GOTCH) << 32);
> +	stats->gotc -= (stats->gptc - old_gptc) * 4;
>  
>  	stats->rnbc += E1000_READ_REG(hw, E1000_RNBC);
>  	stats->ruc += E1000_READ_REG(hw, E1000_RUC);
> @@ -1532,13 +1542,16 @@ igb_read_stats_registers(struct e1000_hw *hw, struct e1000_hw_stats *stats)
>  	stats->roc += E1000_READ_REG(hw, E1000_ROC);
>  	stats->rjc += E1000_READ_REG(hw, E1000_RJC);
>  
> +	stats->tpr += E1000_READ_REG(hw, E1000_TPR);
> +	stats->tpt += E1000_READ_REG(hw, E1000_TPT);
> +
>  	stats->tor += E1000_READ_REG(hw, E1000_TORL);
>  	stats->tor += ((uint64_t)E1000_READ_REG(hw, E1000_TORH) << 32);
> +	stats->tor -= (stats->tpr - old_tpr) * 4;

Why not use ETHER_CRC_LEN rather than magic # 4?

  reply	other threads:[~2015-11-16 16:54 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-16 10:35 [PATCH 0/4] Remove CRC from byte counters Harry van Haaren
2015-11-16 10:35 ` [PATCH 1/4] e1000: remove crc size from all " Harry van Haaren
2015-11-16 16:54   ` Stephen Hemminger [this message]
2015-11-16 17:03     ` Van Haaren, Harry
2015-11-16 10:35 ` [PATCH 2/4] ixgbe: " Harry van Haaren
2015-11-16 10:35 ` [PATCH 3/4] i40e: fix rx/tx size mismatch, remove crc bytes Harry van Haaren
2015-11-16 10:35 ` [PATCH 4/4] fm10k: remove crc size from all byte counters Harry van Haaren
2015-11-17  1:23   ` Qiu, Michael
2015-11-18 10:48 ` [PATCH v2 0/3] Remove CRC from " Harry van Haaren
2015-11-18 10:48   ` [PATCH v2 1/3] e1000: remove crc size from all " Harry van Haaren
2015-11-18 10:48   ` [PATCH v2 2/3] ixgbe: " Harry van Haaren
2015-11-18 10:48   ` [PATCH v2 3/3] i40e: fix rx/tx size mismatch, remove crc bytes Harry van Haaren
2015-11-20 12:04   ` [PATCH v2 0/3] Remove CRC from byte counters Ananyev, Konstantin
2015-11-23 21:51     ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151116085440.3dca3ce0@samsung9 \
    --to=shemming@brocade.com \
    --cc=dev@dpdk.org \
    --cc=harry.van.haaren@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.