[U-Boot] [PATCH 10/10] ARM: socfpga: arria10: add support for building Arria10

[Marek Vasut <marex@denx.de>]

On Thursday, November 19, 2015 at 10:35:47 PM, dinguyen at opensource.altera.com 
wrote:
> From: Dinh Nguyen <dinguyen@opensource.altera.com>
> 
> Update Makefile to build Arria 10.
> 
> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
> ---
>  arch/arm/mach-socfpga/Makefile         | 7 +++++--
>  arch/arm/mach-socfpga/arria10/Makefile | 7 +++++++
>  2 files changed, 12 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm/mach-socfpga/arria10/Makefile
> 
> diff --git a/arch/arm/mach-socfpga/Makefile
> b/arch/arm/mach-socfpga/Makefile index 316b326..0dbe9bb 100644
> --- a/arch/arm/mach-socfpga/Makefile
> +++ b/arch/arm/mach-socfpga/Makefile
> @@ -6,15 +6,18 @@
>  #
>  # SPDX-License-Identifier:	GPL-2.0+
>  #
> -
> +ifneq ($(CONFIG_TARGET_SOCFPGA_ARRIA10),y)
>  obj-y	+= misc.o timer.o reset_manager.o system_manager.o 
clock_manager.o \
>  	   fpga_manager.o scan_manager.o
>  obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
> -
>  # QTS-generated config file wrappers
>  obj-y	+= wrap_pll_config.o
>  obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o	\
>  			   wrap_sdram_config.o
> +else
> +obj-y	+= arria10/

So why exactly does A10 have it's own dedicated dir if most of the code
is probably shared between A10 and AV/CV ?

> +endif
> +
>  CFLAGS_wrap_iocsr_config.o	+= -I$(srctree)/board/$(BOARDDIR)
>  CFLAGS_wrap_pinmux_config.o	+= -I$(srctree)/board/$(BOARDDIR)
>  CFLAGS_wrap_pll_config.o	+= -I$(srctree)/board/$(BOARDDIR)
> diff --git a/arch/arm/mach-socfpga/arria10/Makefile
> b/arch/arm/mach-socfpga/arria10/Makefile new file mode 100644
> index 0000000..f5e4b7d
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/arria10/Makefile
> @@ -0,0 +1,7 @@
> +#
> +# Copyright (C) 2015 Altera Corporation <www.altera.com>
> +#
> +# SPDX-License-Identifier:	GPL-2.0+
> +#
> +
> +obj-y	:= misc_a10.o reset_manager_a10.o sdram_a10.o

Best regards,
Marek Vasut