diff for duplicates of <20151122195925.GR32142@lukather> diff --git a/a/1.txt b/N1/1.txt index 249f80d..f479466 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,7 +1,7 @@ Hi, On Fri, Nov 20, 2015 at 08:11:53PM +0100, Hans de Goede wrote: -> From: Jelle de Jong <jelledejong@powercraft.nl> +> From: Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org> > > The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such > on the PCB, is meant as a A20 based router board. As such the board comes @@ -10,8 +10,8 @@ On Fri, Nov 20, 2015 at 08:11:53PM +0100, Hans de Goede wrote: > 2.5 inch harddisk. To complete its networking features it has a > Realtek RTL8192CU for WiFi 802.11 b/g/n. > -> Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl> -> Signed-off-by: Hans de Goede <hdegoede@redhat.com> +> Signed-off-by: Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org> +> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 297 ++++++++++++++++++++++++++++++ @@ -37,7 +37,7 @@ On Fri, Nov 20, 2015 at 08:11:53PM +0100, Hans de Goede wrote: > +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts > @@ -0,0 +1,297 @@ > +/* -> + * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl> +> + * Copyright 2015 Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual @@ -167,7 +167,7 @@ unstable? > + phy-supply = <®_gmac_3v3>; > + status = "okay"; > + -> + phy1: ethernet-phy at 1 { +> + phy1: ethernet-phy@1 { > + reg = <1>; > + }; > +}; @@ -177,7 +177,7 @@ unstable? > + pinctrl-0 = <&i2c0_pins_a>; > + status = "okay"; > + -> + axp209: pmic at 34 { +> + axp209: pmic@34 { > + reg = <0x34>; > + interrupt-parent = <&nmi_intc>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; @@ -222,28 +222,28 @@ add aliases for the i2c buses as well? > +}; > + > +&pio { -> + usb0_id_detect_pin: usb0_id_detect_pin at 0 { +> + usb0_id_detect_pin: usb0_id_detect_pin@0 { > + allwinner,pins = "PH4"; > + allwinner,function = "gpio_in"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; > + }; > + -> + mmc0_cd_pin_lamobo_r1: mmc0_cd_pin at 0 { +> + mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { > + allwinner,pins = "PH10"; > + allwinner,function = "gpio_in"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; > + }; > + -> + gmac_power_pin_lamobo_r1: gmac_power_pin at 0 { +> + gmac_power_pin_lamobo_r1: gmac_power_pin@0 { > + allwinner,pins = "PH23"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; > + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; > + }; > + -> + led_pins_lamobo_r1: led_pins at 0 { +> + led_pins_lamobo_r1: led_pins@0 { > + allwinner,pins = "PH24"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <SUN4I_PINCTRL_10_MA>; @@ -312,10 +312,3 @@ Maxime Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --------------- next part -------------- -A non-text attachment was scrubbed... -Name: signature.asc -Type: application/pgp-signature -Size: 819 bytes -Desc: Digital signature -URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151122/7c747cb4/attachment.sig> diff --git a/a/content_digest b/N1/content_digest index 341ef19..78c1bc8 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,14 +1,20 @@ "ref\01448046713-13579-1-git-send-email-hdegoede@redhat.com\0" - "From\0maxime.ripard@free-electrons.com (Maxime Ripard)\0" - "Subject\0[PATCH] ARM: dts: sun7i: Add dts file for the lamobo-r1 board\0" + "ref\01448046713-13579-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org\0" + "From\0Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Subject\0Re: [PATCH] ARM: dts: sun7i: Add dts file for the lamobo-r1 board\0" "Date\0Sun, 22 Nov 2015 20:59:25 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" - "\00:1\0" + "To\0Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\0" + "Cc\0Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>" + linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org + devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org + " Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org>\0" + "\01:1\0" "b\0" "Hi,\n" "\n" "On Fri, Nov 20, 2015 at 08:11:53PM +0100, Hans de Goede wrote:\n" - "> From: Jelle de Jong <jelledejong@powercraft.nl>\n" + "> From: Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org>\n" "> \n" "> The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such\n" "> on the PCB, is meant as a A20 based router board. As such the board comes\n" @@ -17,8 +23,8 @@ "> 2.5 inch harddisk. To complete its networking features it has a\n" "> Realtek RTL8192CU for WiFi 802.11 b/g/n.\n" "> \n" - "> Signed-off-by: Jelle de Jong <jelledejong@powercraft.nl>\n" - "> Signed-off-by: Hans de Goede <hdegoede@redhat.com>\n" + "> Signed-off-by: Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org>\n" + "> Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>\n" "> ---\n" "> arch/arm/boot/dts/Makefile | 1 +\n" "> arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 297 ++++++++++++++++++++++++++++++\n" @@ -44,7 +50,7 @@ "> +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts\n" "> @@ -0,0 +1,297 @@\n" "> +/*\n" - "> + * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl>\n" + "> + * Copyright 2015 Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org>\n" "> + *\n" "> + * This file is dual-licensed: you can use it either under the terms\n" "> + * of the GPL or the X11 license, at your option. Note that this dual\n" @@ -174,7 +180,7 @@ "> +\tphy-supply = <®_gmac_3v3>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\tphy1: ethernet-phy at 1 {\n" + "> +\tphy1: ethernet-phy@1 {\n" "> +\t\treg = <1>;\n" "> +\t};\n" "> +};\n" @@ -184,7 +190,7 @@ "> +\tpinctrl-0 = <&i2c0_pins_a>;\n" "> +\tstatus = \"okay\";\n" "> +\n" - "> +\taxp209: pmic at 34 {\n" + "> +\taxp209: pmic@34 {\n" "> +\t\treg = <0x34>;\n" "> +\t\tinterrupt-parent = <&nmi_intc>;\n" "> +\t\tinterrupts = <0 IRQ_TYPE_LEVEL_LOW>;\n" @@ -229,28 +235,28 @@ "> +};\n" "> +\n" "> +&pio {\n" - "> +\tusb0_id_detect_pin: usb0_id_detect_pin at 0 {\n" + "> +\tusb0_id_detect_pin: usb0_id_detect_pin@0 {\n" "> +\t\tallwinner,pins = \"PH4\";\n" "> +\t\tallwinner,function = \"gpio_in\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_PULL_UP>;\n" "> +\t};\n" "> +\n" - "> +\tmmc0_cd_pin_lamobo_r1: mmc0_cd_pin at 0 {\n" + "> +\tmmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 {\n" "> +\t\tallwinner,pins = \"PH10\";\n" "> +\t\tallwinner,function = \"gpio_in\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_PULL_UP>;\n" "> +\t};\n" "> +\n" - "> +\tgmac_power_pin_lamobo_r1: gmac_power_pin at 0 {\n" + "> +\tgmac_power_pin_lamobo_r1: gmac_power_pin@0 {\n" "> +\t\tallwinner,pins = \"PH23\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" "> +\t\tallwinner,pull = <SUN4I_PINCTRL_NO_PULL>;\n" "> +\t};\n" "> +\n" - "> +\tled_pins_lamobo_r1: led_pins at 0 {\n" + "> +\tled_pins_lamobo_r1: led_pins@0 {\n" "> +\t\tallwinner,pins = \"PH24\";\n" "> +\t\tallwinner,function = \"gpio_out\";\n" "> +\t\tallwinner,drive = <SUN4I_PINCTRL_10_MA>;\n" @@ -318,13 +324,6 @@ "-- \n" "Maxime Ripard, Free Electrons\n" "Embedded Linux, Kernel and Android engineering\n" - "http://free-electrons.com\n" - "-------------- next part --------------\n" - "A non-text attachment was scrubbed...\n" - "Name: signature.asc\n" - "Type: application/pgp-signature\n" - "Size: 819 bytes\n" - "Desc: Digital signature\n" - URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151122/7c747cb4/attachment.sig> + http://free-electrons.com -0b3c4664440831a945457a3502be83647233ecc4d2c140fd95465f43857f6f66 +4df1602028211553f9575b95834d39dd378e24b11f90e96ca8b0eb026916ca95
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.