All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexander Aring <alex.aring@gmail.com>
To: Dave Thompson <dthompson@nexusisp.com>
Cc: barebox@lists.infradead.org, carlo.caione@gmail.com
Subject: Re: rpi2 support
Date: Mon, 30 Nov 2015 12:05:28 +0100	[thread overview]
Message-ID: <20151130110522.GA7006@omega> (raw)
In-Reply-To: <1448878678.1471428558@matrix.start.ca>

Hi,

On Mon, Nov 30, 2015 at 05:17:58AM -0500, Dave Thompson wrote:
> Thanks for the quick replies
> rpi have only sold 7M, so not that big in the grand scheme of things
> But the rpi2 has only been out for 8 months, 
> I am sure it will be popular
> 
> And now,, out only a few days,, the pizero, a $5 board
> Essentially an "A" without networking but 40 GPIO pin header
> I bet they will sell a lot of them  (BCM2835)
> 
> For me, I think I will do some version of kexec,
> there are 3
> A bootloader is kind of overkill, sledgehammer to kill flies
> thanks
> dave thompson
> 

I tried a dirty hack, because bcm2835 and bcm2836 are very similar:

diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
index 134ad9b..aa610da 100644
--- a/arch/arm/mach-bcm2835/Kconfig
+++ b/arch/arm/mach-bcm2835/Kconfig
@@ -9,6 +9,7 @@ choice
 
 config MACH_RPI
        bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
+       select CPU_V7
 
 endchoice
 
diff --git a/arch/arm/mach-bcm2835/include/mach/platform.h b/arch/arm/mach-bcm2835/include/mach/platform.h
index e55085a..ee77f1e 100644
--- a/arch/arm/mach-bcm2835/include/mach/platform.h
+++ b/arch/arm/mach-bcm2835/include/mach/platform.h
@@ -28,7 +28,7 @@
  * This file is manually generated.
  */
 
-#define BCM2835_PERI_BASE      0x20000000
+#define BCM2835_PERI_BASE      0x3f000000
 #define BCM2835_ST_BASE                (BCM2835_PERI_BASE + 0x3000)    /* System Timer */
 #define BCM2835_DMA_BASE       (BCM2835_PERI_BASE + 0x7000)    /* DMA controller */
 #define BCM2835_ARM_BASE       (BCM2835_PERI_BASE + 0xB000)    /* BCM2708 ARM control block */

---

After that I get some printout:

# mbox: Timeout waiting for response
bcm2835: Could not query board revision
mbox: Timeout waiting for response
regulator-bcm2835 regulator-bcm2835: bcm2835: Could not set module 1 power state
uart-pl011 uart0-pl0110: probe failed: Connection timed out
mbox: Timeout waiting for response
mbox: Timeout waiting for response
could not query ARM memory size
initcall rpi_mem_init+0x0/0x7c failed: Connection timed out
bcm2835-gpio bcm2835-gpio0: probed gpiochip0 with base 0
malloc space: 0x03c00000 -> 0x03ffffff (size 4 MiB)
bcm2835_mci bcm2835_mci0: clock not found: -2
bcm2835_mci bcm2835_mci0: probe failed: No such file or directory
no /dev/disk0.0. using default env
environment load /dev/env0: No such file or directory
Maybe you have to create the partition.
running /env/bin/init...

Hit m for menu or any other key to stop autoboot:  0
blspec: blspec_scan_directory: net loader/entries
ifup: No such file or directory
running automount command 'ifup eth0 && mount -t tftp $eth0.serverip /mnt/tftp' failed
global: set parameter dhcp.vendor_id: Invalid argument
ifup: No such file or directory
running automount command 'ifup eth0 && mount -t tftp $eth0.serverip /mnt/tftp' failed
could not open /mnt/tftp/none-linux-rpi: No such file or directory
Booting net failed: No such file or directory
booting net failed: No such file or directory
boot: No such file or directory

type exit to get to the menu
                            barebox@<NULL>:/
# 

---

Maybe a good point to start. :-)

- Alex

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2015-11-30 11:05 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-30 10:17 rpi2 support Dave Thompson
2015-11-30 11:05 ` Alexander Aring [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151130110522.GA7006@omega \
    --to=alex.aring@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=carlo.caione@gmail.com \
    --cc=dthompson@nexusisp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.