diff for duplicates of <20151204205906.GG20125@localhost> diff --git a/a/1.txt b/N1/1.txt index b63f8ed..cfbc714 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,4 +1,4 @@ -On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr Štetiar wrote: +On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr ?tetiar wrote: > It's currently not possible to use reset-gpio on board where the GPIO is > active low as the code incorrectly assumes, that reset-gpio will be > always active high. @@ -6,14 +6,14 @@ On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr Štetiar wrote: > In my case the broken behavior was observed on Toradex Apalis SoM with > Ixora base board. > -> Signed-off-by: Petr Štetiar <ynezz@true.cz> +> Signed-off-by: Petr ?tetiar <ynezz@true.cz> Applied as follows with Lucas' reviewed-by to pci/host-imx6 for v4.5, thanks! commit 5c5fb40de8f14391a1238db05cef88754faf9229 -Author: Petr Štetiar <ynezz@true.cz> +Author: Petr ?tetiar <ynezz@true.cz> Date: Fri Nov 27 11:56:34 2015 +0100 PCI: imx6: Add support for active-low reset GPIO @@ -26,7 +26,7 @@ Date: Fri Nov 27 11:56:34 2015 +0100 high/low flag. This also adds support for GPIOs described via ACPI. [bhelgaas: changelog] - Signed-off-by: Petr Štetiar <ynezz@true.cz> + Signed-off-by: Petr ?tetiar <ynezz@true.cz> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> diff --git a/a/content_digest b/N1/content_digest index ba8d3ce..60da29a 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,17 +1,12 @@ "ref\01448620464.3689.94.camel@pengutronix.de\0" "ref\01448621794-19916-1-git-send-email-ynezz@true.cz\0" - "From\0Bjorn Helgaas <helgaas@kernel.org>\0" - "Subject\0Re: [PATCH v3] PCI: imx6: Fix reset-gpio to work with active low GPIO\0" + "From\0helgaas@kernel.org (Bjorn Helgaas)\0" + "Subject\0[PATCH v3] PCI: imx6: Fix reset-gpio to work with active low GPIO\0" "Date\0Fri, 4 Dec 2015 14:59:06 -0600\0" - "To\0Petr \305\240tetiar <ynezz@true.cz>\0" - "Cc\0linux-arm-kernel@lists.infradead.org" - linux-pci@vger.kernel.org - Bjorn Helgaas <bhelgaas@google.com> - Lucas Stach <l.stach@pengutronix.de> - " Richard Zhu <Richard.Zhu@freescale.com>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" - "On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr \305\240tetiar wrote:\n" + "On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr ?tetiar wrote:\n" "> It's currently not possible to use reset-gpio on board where the GPIO is\n" "> active low as the code incorrectly assumes, that reset-gpio will be\n" "> always active high.\n" @@ -19,14 +14,14 @@ "> In my case the broken behavior was observed on Toradex Apalis SoM with\n" "> Ixora base board.\n" "> \n" - "> Signed-off-by: Petr \305\240tetiar <ynezz@true.cz>\n" + "> Signed-off-by: Petr ?tetiar <ynezz@true.cz>\n" "\n" "Applied as follows with Lucas' reviewed-by to pci/host-imx6 for v4.5,\n" "thanks!\n" "\n" "\n" "commit 5c5fb40de8f14391a1238db05cef88754faf9229\n" - "Author: Petr \305\240tetiar <ynezz@true.cz>\n" + "Author: Petr ?tetiar <ynezz@true.cz>\n" "Date: Fri Nov 27 11:56:34 2015 +0100\n" "\n" " PCI: imx6: Add support for active-low reset GPIO\n" @@ -39,7 +34,7 @@ " high/low flag. This also adds support for GPIOs described via ACPI.\n" " \n" " [bhelgaas: changelog]\n" - " Signed-off-by: Petr \305\240tetiar <ynezz@true.cz>\n" + " Signed-off-by: Petr ?tetiar <ynezz@true.cz>\n" " Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>\n" " Reviewed-by: Lucas Stach <l.stach@pengutronix.de>\n" "\n" @@ -97,4 +92,4 @@ " \t/* Fetch clocks */\n" " \timx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, \"pcie_phy\");" -9aa9d22da03568bc9acbce814bdfe3655d78ad4824955e8eb430757c9ec32e94 +eb87a71ec41e9e80fec403ca8c0e4e6a347cc83efb11af789eec7f773081aabc
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.