diff for duplicates of <20151204210234.GH20125@localhost> diff --git a/a/1.txt b/N1/1.txt index cddf842..672f1ef 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,7 +1,7 @@ [+cc Jingoo] On Fri, Dec 04, 2015 at 02:59:06PM -0600, Bjorn Helgaas wrote: -> On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr Štetiar wrote: +> On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr ?tetiar wrote: > > It's currently not possible to use reset-gpio on board where the GPIO is > > active low as the code incorrectly assumes, that reset-gpio will be > > always active high. @@ -9,7 +9,7 @@ On Fri, Dec 04, 2015 at 02:59:06PM -0600, Bjorn Helgaas wrote: > > In my case the broken behavior was observed on Toradex Apalis SoM with > > Ixora base board. > > -> > Signed-off-by: Petr Štetiar <ynezz@true.cz> +> > Signed-off-by: Petr ?tetiar <ynezz@true.cz> > > Applied as follows with Lucas' reviewed-by to pci/host-imx6 for v4.5, > thanks! @@ -21,7 +21,7 @@ flags for your "reset-gpio"? Bjorn > commit 5c5fb40de8f14391a1238db05cef88754faf9229 -> Author: Petr Štetiar <ynezz@true.cz> +> Author: Petr ?tetiar <ynezz@true.cz> > Date: Fri Nov 27 11:56:34 2015 +0100 > > PCI: imx6: Add support for active-low reset GPIO @@ -34,7 +34,7 @@ Bjorn > high/low flag. This also adds support for GPIOs described via ACPI. > > [bhelgaas: changelog] -> Signed-off-by: Petr Štetiar <ynezz@true.cz> +> Signed-off-by: Petr ?tetiar <ynezz@true.cz> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > Reviewed-by: Lucas Stach <l.stach@pengutronix.de> > diff --git a/a/content_digest b/N1/content_digest index 0a54cc8..23c3b01 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,22 +1,16 @@ "ref\01448620464.3689.94.camel@pengutronix.de\0" "ref\01448621794-19916-1-git-send-email-ynezz@true.cz\0" "ref\020151204205906.GG20125@localhost\0" - "From\0Bjorn Helgaas <helgaas@kernel.org>\0" - "Subject\0Re: [PATCH v3] PCI: imx6: Fix reset-gpio to work with active low GPIO\0" + "From\0helgaas@kernel.org (Bjorn Helgaas)\0" + "Subject\0[PATCH v3] PCI: imx6: Fix reset-gpio to work with active low GPIO\0" "Date\0Fri, 4 Dec 2015 15:02:34 -0600\0" - "To\0Petr \305\240tetiar <ynezz@true.cz>\0" - "Cc\0linux-arm-kernel@lists.infradead.org" - linux-pci@vger.kernel.org - Bjorn Helgaas <bhelgaas@google.com> - Lucas Stach <l.stach@pengutronix.de> - Richard Zhu <Richard.Zhu@freescale.com> - " Jingoo Han <jingoohan1@gmail.com>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "[+cc Jingoo]\n" "\n" "On Fri, Dec 04, 2015 at 02:59:06PM -0600, Bjorn Helgaas wrote:\n" - "> On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr \305\240tetiar wrote:\n" + "> On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr ?tetiar wrote:\n" "> > It's currently not possible to use reset-gpio on board where the GPIO is\n" "> > active low as the code incorrectly assumes, that reset-gpio will be\n" "> > always active high.\n" @@ -24,7 +18,7 @@ "> > In my case the broken behavior was observed on Toradex Apalis SoM with\n" "> > Ixora base board.\n" "> > \n" - "> > Signed-off-by: Petr \305\240tetiar <ynezz@true.cz>\n" + "> > Signed-off-by: Petr ?tetiar <ynezz@true.cz>\n" "> \n" "> Applied as follows with Lucas' reviewed-by to pci/host-imx6 for v4.5,\n" "> thanks!\n" @@ -36,7 +30,7 @@ "Bjorn\n" "\n" "> commit 5c5fb40de8f14391a1238db05cef88754faf9229\n" - "> Author: Petr \305\240tetiar <ynezz@true.cz>\n" + "> Author: Petr ?tetiar <ynezz@true.cz>\n" "> Date: Fri Nov 27 11:56:34 2015 +0100\n" "> \n" "> PCI: imx6: Add support for active-low reset GPIO\n" @@ -49,7 +43,7 @@ "> high/low flag. This also adds support for GPIOs described via ACPI.\n" "> \n" "> [bhelgaas: changelog]\n" - "> Signed-off-by: Petr \305\240tetiar <ynezz@true.cz>\n" + "> Signed-off-by: Petr ?tetiar <ynezz@true.cz>\n" "> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>\n" "> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>\n" "> \n" @@ -107,4 +101,4 @@ "> \t/* Fetch clocks */\n" "> \timx6_pcie->pcie_phy = devm_clk_get(&pdev->dev, \"pcie_phy\");" -266d5fa566d392c4211af1d1c6cb7b637c2d11e4dfb4994a884e4866398fd528 +180230a22d6a852d66277d97d806a56c020e02450ced5a6e4d10eb0fabe77bcb
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.