[U-Boot] [PATCH 5/6] arm: socfpga: Introduce common board code

[Marek Vasut <marex@denx.de>]

On Monday, December 07, 2015 at 03:29:16 PM, Chin Liang See wrote:
> On Mon, 2015-12-07 at 15:23 +0100, Marek Vasut wrote:
> > On Monday, December 07, 2015 at 02:32:04 PM, Chin Liang See wrote:
> > > On Mon, 2015-12-07 at 14:23 +0100, Marek Vasut wrote:
> > > > On Monday, December 07, 2015 at 01:53:48 PM, Chin Liang See
> > > > wrote:
> > > > 
> > > > [...]
> > > > 
> > > > > > diff --git a/arch/arm/mach-socfpga/board.c b/arch/arm/mach
> > > > > > -socfpga/board.c
> > > > > > new file mode 100644
> > > > > > index 0000000..a41d089
> > > > > > --- /dev/null
> > > > > > +++ b/arch/arm/mach-socfpga/board.c
> > > > > 
> > > > > I am thinking this can go into misc.c instead new file.
> > > > 
> > > > misc.c is bloated with random crap already, I would like to keep
> > > > things
> > > > orderly a little. Let's keep the board code and platform code
> > > > separated.
> > > 
> > > Initial thinking misc.c should be as lean as possible but that
> > > seems
> > > not today. Can consider split them out per features such as usb.c
> > > ethernet.c.
> > 
> > There is no ethernet/usb... anything in misc.c and there shouldn't
> > be.
> > All of this stuff is (or should be) probed from OF :-)
> 
> Looking at misc.c, yup, they are specific to socfpga such as system
> manager emac registers. Till then, good from me

The cpu_eth_init() could use improvement, but we don't support generic
reset handling yet I believe. That's the only thing which is obviously
visible there, which could be improved.

The other thing which might use improvement is the FPGA registration,
I suspect that might recycle the bindings from current linux 4.4.x at
some point and move to DT as well.

Best regards,
Marek Vasut