diff for duplicates of <20151209150935.GC31930@localhost> diff --git a/a/1.txt b/N1/1.txt index 99e4c0b..618e28b 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -6,7 +6,7 @@ On Tue, Dec 8, 2015 at 11:28 PM, Han Jingoo wrote: > > [+cc Jingoo] > > > > On Fri, Dec 04, 2015 at 02:59:06PM -0600, Bjorn Helgaas wrote: -> > > On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr Štetiar wrote: +> > > On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr ?tetiar wrote: > > > > It's currently not possible to use reset-gpio on board where the GPIO is > > > > active low as the code incorrectly assumes, that reset-gpio will be > > > > always active high. @@ -14,7 +14,7 @@ On Tue, Dec 8, 2015 at 11:28 PM, Han Jingoo wrote: > > > > In my case the broken behavior was observed on Toradex Apalis SoM with > > > > Ixora base board. > > > > -> > > > Signed-off-by: Petr Štetiar <ynezz@true.cz> +> > > > Signed-off-by: Petr ?tetiar <ynezz@true.cz> > > > > > > Applied as follows with Lucas' reviewed-by to pci/host-imx6 for v4.5, > > > thanks! diff --git a/a/content_digest b/N1/content_digest index b34aa25..ffe0927 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -2,16 +2,10 @@ "ref\01448621794-19916-1-git-send-email-ynezz@true.cz\0" "ref\020151204205906.GG20125@localhost\0" "ref\020151204210234.GH20125@localhost\0" - "From\0Bjorn Helgaas <helgaas@kernel.org>\0" - "Subject\0Re: [PATCH v3] PCI: imx6: Fix reset-gpio to work with active low GPIO\0" + "From\0helgaas@kernel.org (Bjorn Helgaas)\0" + "Subject\0[PATCH v3] PCI: imx6: Fix reset-gpio to work with active low GPIO\0" "Date\0Wed, 9 Dec 2015 09:09:35 -0600\0" - "To\0Petr \305\240tetiar <ynezz@true.cz>\0" - "Cc\0linux-arm-kernel@lists.infradead.org" - linux-pci@vger.kernel.org - Bjorn Helgaas <bhelgaas@google.com> - Lucas Stach <l.stach@pengutronix.de> - Richard Zhu <Richard.Zhu@freescale.com> - " Jingoo Han <jingoohan1@gmail.com>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "[Jingoo's response didn't make it to the list because it contained\n" @@ -22,7 +16,7 @@ "> > [+cc Jingoo]\n" "> > \n" "> > On Fri, Dec 04, 2015 at 02:59:06PM -0600, Bjorn Helgaas wrote:\n" - "> > > On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr \305\240tetiar wrote:\n" + "> > > On Fri, Nov 27, 2015 at 11:56:34AM +0100, Petr ?tetiar wrote:\n" "> > > > It's currently not possible to use reset-gpio on board where the GPIO is\n" "> > > > active low as the code incorrectly assumes, that reset-gpio will be\n" "> > > > always active high.\n" @@ -30,7 +24,7 @@ "> > > > In my case the broken behavior was observed on Toradex Apalis SoM with\n" "> > > > Ixora base board.\n" "> > > > \n" - "> > > > Signed-off-by: Petr \305\240tetiar <ynezz@true.cz>\n" + "> > > > Signed-off-by: Petr ?tetiar <ynezz@true.cz>\n" "> > > \n" "> > > Applied as follows with Lucas' reviewed-by to pci/host-imx6 for v4.5,\n" "> > > thanks!\n" @@ -46,4 +40,4 @@ "\n" Bjorn -387fe96bd17538fa76a868d85add00cbdaa070b80b6cff5a1260c363d2ec572a +6f763b1064034ad5695bf42db0e941ad1124b7a213643dee22781ba9d9ba2497
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.