Re: [PATCH V3 0/5] PM / OPP: opp-supported-hw and <prop>-name bindings

[Lee Jones <lee.jones@linaro.org>]

On Wed, 11 Nov 2015, Viresh Kumar wrote:

> Hi Rafael,
> 
> Rob only needs to Ack the modified 2/5 patch and then you can safely
> apply this series.
> 
> The first patch enables us to select only a subset of OPPs from the
> bigger table, based on what version of the hardware we are running on.
> 
> The second one enables us to select slightly different values for
> multiple properties, based on what kind of hardware they are running on.
> 
> The third one removes an (unused) binding, which is replaced by the
> second patch with a better solution.
> 
> The fourth patch is based on what Stephen suggested (and then reviewed)
> in the earlier series, and the 5th one updates the existing users of
> these bindings for it.
> 
> V2->V3:
> - dropped turbo/suspend named properties
> - Applied all the Acks
> 
> Viresh Kumar (5):
>   PM / OPP: Add "opp-supported-hw" binding
>   PM / OPP: Add {opp-microvolt|opp-microamp}-<name> binding
>   PM / OPP: Remove 'operating-points-names' binding
>   PM / OPP: Rename OPP nodes as opp@<opp-hz>
>   ARM: dts: exynos4412: Rename OPP nodes as opp@<opp-hz>

Tested-by: Lee Jones <lee.jones@linaro.org>

>  Documentation/devicetree/bindings/opp/opp.txt | 132 ++++++++++++++++++--------
>  arch/arm/boot/dts/exynos4412.dtsi             |  28 +++---
>  2 files changed, 107 insertions(+), 53 deletions(-)
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog